• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1191-1195
• /
• 2006

Now days, heavy storm occur to be continue. It is hard to use before frequency based on flood discharge for decision that design water pocket structure. We need to estimation of frequency based on flood discharge on the important basin likely city or basin that damage caused by flood recurrence. In this paper flood discharge calculated by Clark watershed method and SCS synthetic unit hydrograph method about upside during each minute of among time distribution method of rainfall, Huff method choosing Bocheong Stream basin that is representative basin of International Hydrologic Project (IHP) about time distribution of rainfall that exert big effect at flood discharge estimate to research target basin because of and the result is as following. Relation between probability flood discharge that is calculated through frequency analysis about flood discharge data and rainfall - runoff that is calculated through outward flow model was assumed about $48.1{\sim}95.9%$ in the case of $55.8{\sim}104.0%$, SCS synthetic unit hydrograph method in case of Clark watershed method, and Clark watershed method has big value overly in case of than SCS synthetic unit hydrograph method in case of basin that see, but branch of except appeared little more similarly with frequency flood discharge that calculate using survey data. In the case of Critical duration, could know that change is big area of basin is decrescent. When decide time distribution type of rainfall, apply upside during most Huff 1-ST because heavy rain phenomenon of upsides appears by the most things during result 1-ST about observation recording of target area about Huff method to be method to use most in business, but maximum value of peak flood discharge appeared on Huff 3-RD too in the case of upside, SCS synthetic unit hydrograph method during Huff 3-RD incidental of this research and case of Clark watershed method. That is, in the case of Huff method, latitude is decide that it is decision method of reasonable design floods that calculate applying during all $1-ST{\sim}4-TH$.

• Journal of the Korean Society for information Management
• /
• v.20 no.4 s.50
• /
• pp.233-248
• /
• 2003

The Inverse Document Frequency (IDF) weighting method is based on the hypothesis that in the document collection the lower the frequency of a term is, the more important the term is as a subject word. This well-known hypothesis is, however, somewhat questionable because some low frequency terms turn out to be insufficient subject words. This study suggests the pivoted IDF weighting method for better retrieval effectiveness, on the assumption that medium frequency terms are more important than low frequency terms. We thoroughly evaluated this method on three test collections and it showed performance improvements especially at high ranks.

• ETRI Journal
• /
• v.44 no.4
• /
• pp.531-542
• /
• 2022

With the increasing demand for unlicensed spectrum, several regulators have been opening up the 6-GHz band for unlicensed use while ensuring compliance with the technical requirement to avoid harmful interference in the existing primary services (PSs). In this paper, we present two methodologies, a channel-based method and a frequency-based method, which are applicable to a frequency coordination system that calculates the permissible transmit power in the channels or frequencies available to a secondary service (SS). In addition, we have demonstrated that the available transmit power of an SS can be maximized by adjusting the power allocation of the assigned resource units under the condition that the channel of the SS is partially overlapped with that of the PS. Based on the analysis results, it is suggested that it would be better to utilize the two methods selectively according to the operating channel conditions of the PS and the SS.

• Water Engineering Research
• /
• v.1 no.1
• /
• pp.49-61
• /
• 2000

Magnitude-frequency relationships are used in the design of dams, highway bridges, culverts, water supply systems, and flood control structures. In this paper, possible techniques for analyzing flood frequency at a site are presented. A currently used approach to flood frequency analysis is based on the concept of parametric statistical inference. In this analysis, the assumption is make that the distribution function describing flood data in known. However, such an assumption is not always justified. Even though many people have shown that the nonparametric method provides a better fit to the data than the parometric method and gives more reliable flood estimates. the noparpmetric method implies a small probability in extrapolation beyond the highest observed data in the sample. Therefore, a remedy is presented in this paper by introducing an estimator which mixes parametric and nonparametric density estimate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.771-775
• /
• 2006

There has been much effort to find suitable methods for structural analysis in the mid-frequency region where traditional low frequency methods have increasing uncertainties whilst statistical energy analysis is not strictly applicable. Systems consisting of relatively stiff beams coupled to flexible plates have a particularly broad mid-frequency region where the beams support only a few modes whilst the plate has a high modal density and modal overlap. A system of two parallel beams coupled to a plate is investigated based on the wave method, which is an approximate method. The wave model is extended from a single-beam-plate system, to a plate with two identical beams which is modelled using a symmetric-anti symmetric technique. Experimental results such as powers and energy ratios show the validity of the analytical wave models.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1376-1385
• /
• 2017

This paper proposes a method for estimating the expected frequency of voltage swells caused by asymmetrical faults in a power system. Although voltage swell is less common than voltage sag, repeated swells can have severe destructive impact on sensitive equipment. It is essential to understand system performance related to voltage swells for finding optimal countermeasures. An expected swell frequency at a sensitive load terminal can be estimated based on the concept of an area of vulnerability (AOV) and long-term system fault data. This paper describes an effective method for calculating an AOV to voltage swells. Interval estimation for an expected swell frequency is also presented for effective understanding of system performance. The proposed method provides long-term performance evaluation of the frequency and degree of voltage swell occurrences.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.402-405
• /
• 1997

The analysis of heart sounds is a noninvasive diagnostic method useful to diagnose heart valve function. In this paper we compared the ability of spectral analysis method for prosthetic heart valve sounds. Phonocardiograms of prosthetic heart valve were analyzed in order to derive frequency domain feature suitable for the classification of the valve state. The FFT-based methods did not provide sufficient frequency resolution to completely characterize the spectrum of prosthetic heart valve sounds. A high resolution parametric methods were shown to give superior frequency resolution. In parametric methods, all methods provide a 1st & 2nd & 3rd frequency component. But Shank method provided a most dominant frequency peak.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.1
• /
• pp.34-40
• /
• 2005

This paper presents a frequency transfer function synthesis for simplifying a high-order model with time delay to a low-order model. A model reduction is based on minimizing the error function weighted by the numerator polynomial of reduced systems. The proposed method provides better low frequency fit and a computer aided algorithm. And in this paper, we present a design method of PID controller for achieving the desired specifications via the reduced model. The proposed method identifies the parameter vector of PID controller from a linear system that develops from rearranging the two dimensional input matrices and output vectors obtained from the frequency bounds.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.64-69
• /
• 2012

This paper presents a hybrid pulse width modulation (PWM) method under low switching frequency conditions based on space vector PWM (SVPWM) and selective harmonic eliminated PWM (SHEPWM), which use asynchronous carrier modulation SVPWM at low frequency, and SHEPWM at high frequency, a square wave after rated conditions. A transitive strategy is proposed to realize a smooth transition of individual modes including SVPWM, SHEPWM and square waves. Experimental results confirm this hybrid modulation method and their transition are reasonable and proper.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.769-776
• /
• 2006

A measured frequency response function can be represented as a ratio of two polynomials. A curve-fitting of frequency responses with Legendre polynomialis suggested in the paper. And the suggested curve-fitting algorithm is based on the least-square error method. Since the Legendre polynomials satisfy the orthogonality condition, the curve-fitting with the polynomials results to more reliable curve-fitting than ordinary polynomial method. Though the proposed curve-fitting with Legendre polynomials cannot cover all frequency range of interest, example shows that the suggested method is quite applicable in a limited frequency band.