• 제목/요약/키워드: frequency synthesizers

검색결과 25건 처리시간 0.024초

다중위상 지연고정루프 기반의 위상 선택기와 분수 분주형 위상고정루프를 이용하는 121.15 MHz 주파수 합성기 (121.15MHz Frequency Synthesizers using Multi-phase DLL-based Phase Selector and Fractional-N PLL)

  • 이승용;이필호;장영찬
    • 한국정보통신학회논문지
    • /
    • 제17권10호
    • /
    • pp.2409-2418
    • /
    • 2013
  • 본 논문에서는 on-chip oscilloscope의 sub-sampler를 위한 클록을 생성하기 위한 두 가지 방식의 주파수 합성기를 제안한다. 제안하는 두 가지의 주파수 합성기는 지연고정루프 기반의 위상 선택기를 이용한 구조와 분수 분주형 위상고정루프를 이용하는 구조를 가지며 시뮬레이션 결과를 비교함으로써 각 구조의 특성이 분석된다. 제안된 두 회로 모두 1V 공급전압을 이용하는 65-nm CMOS 공정에서 설계되었으며, 125 MHz의 주파수를 가지는 입력 클록에 대해 121.15 MHz의 주파수를 가지는 출력 클록을 생성한다. 지연고정루프 기반의 위상 선택기를 이용한 주파수 합성기는 0.167 $mm^2$의 면적을 가지며 출력 클록은 2.88 ps의 지터 특성을 나타나며, 4.75 mW의 전력을 소모한다. 분수 분주형 위상고정루프를 이용한 주파수 합성기는 0.662 $mm^2$의 면적을 가지며 7.2 ps의 지터 특성을 나타내며, 1.16 mW의 전력을 소모한다.

MB-OFDM UWB 시스템을 위한 주파수 합성기의 유형별 설계 및 비교 (Design and Comparison of the Frequency Synthesizers for MB-OFDM UWB Systems)

  • 이재경;정태현;박종태;유종근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
    • /
    • pp.482-484
    • /
    • 2006
  • This paper describes fast-hopping frequency synthesizers for multi-band OFDM(MB-OFDM) ultra-wide band(UWB) systems. Three different structures in generating 3 center frequencies(3432MHz, 3960MHz, 4488MHz) are designed and compared. The first structure generates 3 center frequencies using only one PLL operating at 4224MHz. The second uses three PLLs operating at corresponding center frequencies. The third employes two PLLs operating at 3960MHz and 528MHz. Simulation results using a 0.18um RF CMOS process parameters show that the third structure exhibit the best characteristics. The band switching time of the proposed synthesizer is less than 1.3ns and the spur is less than -36dBc. The synthesizer consumes 22mA from a 1.8V supply.

  • PDF

주파수 합성기용 GaAs prescalar IC 설계 및 제작 (Desing and fabrication of GaAs prescalar IC for frequency synthesizers)

  • 윤경식;이운진
    • 한국통신학회논문지
    • /
    • 제21권4호
    • /
    • pp.1059-1067
    • /
    • 1996
  • A 128/129 dual-modulus prescalar IC is designed for application to frequency synthesizers in high frequency communication systems. The FET logic used in this design is SCFL(Source Coupled FET Logic), employing depletion-mode 1.mu.m gate length GaAs MESFETs with the threshold voltage of -1.5V. This circuit consists of 8 flip-flops, 3 OR gates, 2 NOR gates, a modulus control buffer and I/O buffers, which are integrated with about 440 GaAs MESFETs on dimensions of 1.8mm. For $V_{DD}$ and $V_{SS}$ power supply voltages 5V and -3.3V Commonly used in TTL and ECL circuits are determined, respectively. The simulation results taking into account the threshold voltage variation of .+-.0.2V and the power supply variation of .+-.1V demonstrate that the designed prescalar can operate up to 2GHz. This prescalar is fabricated using the ETRI MMIC foundary process and the measured maximum operating frquency is 621MHz.

  • PDF

A Multiphase Compensation Method with Dynamic Element Matching Technique in Σ-Δ Fractional-N Frequency Synthesizers

  • Chen, Zuow-Zun;Lee, Tai-Cheng
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제8권3호
    • /
    • pp.179-192
    • /
    • 2008
  • A multiphase compensation method with mismatch linearization technique, is presented and demonstrated in a $\Sigma-\Delta$ fractional-N frequency synthesizer. An on-chip delay-locked loop (DLL) and a proposed delay line structure are constructed to provide multiphase compensation on $\Sigma-\Delta$ quantizetion noise. In the delay line structure, dynamic element matching (DEM) techniques are employed for mismatch linearization. The proposed $\Sigma-\Delta$ fractional-N frequency synthesizer is fabricated in a $0.18-{\mu}m$ CMOS technology with 2.14-GHz output frequency and 4-Hz resolution. The die size is 0.92 mm$\times$1.15 mm, and it consumes 27.2 mW. In-band phase noise of -82 dBc/Hz at 10 kHz offset and out-of-band phase noise of -103 dBc/Hz at 1 MHz offset are measured with a loop bandwidth of 200 kHz. The settling time is shorter than $25{\mu}s$.

디스플레이 인터페이스에 적용된 6 Gbps급 송신기용 PLL(Phase Locked Loop) 설계 (A Design of PLL for 6 Gbps Transmitter in Display Interface Application)

  • 유병재;조현묵
    • 전기전자학회논문지
    • /
    • 제17권1호
    • /
    • pp.16-21
    • /
    • 2013
  • 최근 주파수 합성기는 협대역으로 설계를 하거나 광대역 주파수 합성기의 경우 이중루프구조로 설계하여 위상잡음을 줄이는 방식을 사용하고 있다. 그러나 이중루프구조의 주파수 합성기는 전압제어발진기의 중심주파수 불일치와 추가적인 루프를 필요로 하는 단점을 가지고 있다. 본 논문에서는 800Mhz ~ 3Ghz를 지원하는 새로운 구조의 단일루프 형태의 다중제어 광대역 주파수 합성기를 제안한다. 본 논문의 주파수 합성기의 전압제어발진기는 Coarse 제어 전압과 Fine제어전압을 고정되며, 최종적으로 낮은 Kvco를 가지게 된다. 주파수 합성기의 모의실험은 UMC $0.11{\mu}m$ 공정에서 검증하였으며, 제안된 주파수 합성기는 다양한 응용분야에 사용될 수 있을 것으로 기대된다.

직접 디지털 주파수 합성을 위한 효율적인 ROM 압축 방법 (Effective ROM Compression Methods for Direct Digital Frequency Synthesis)

  • 이진철;신현철
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제31권9호
    • /
    • pp.536-542
    • /
    • 2004
  • 본 논문에서는 디지털 주파수 합성기의 구조에 대하여 연구하였다. 디지털 주파수 합성기는 높은 스펙트럼 순도로 빠른 주파수 전환이 가능하고, 현대의 확산 스펙트럼 무선통신 시스템에 널리 사용된다. 롬 기반의 디지털 주파수 합성기는 싸인 파형의 크기를 저장한 롬 테이블을 사용한다. 본 논문에서는 롬의 크기를 줄이는 세 가지 새로운 기술을 제안하였다. 새로운 기법 중 한 가지는 여러 개의 계층적 구조를 사용하였다. 다른 기법들은 계층적 롬 구조를 간단한 보간 기법으로 결합하였다. 이러한 기법으로 12비트의 싸인 파형을 생성하였다. 실험 결과 새롭게 제안한 기법은 기존 방법[1]에 비해 ROM 크기를 24%까지 줄일 수 있다.

병렬처리가 가능한 확장 직접 디지털 주파수 합성기 (Extended Direct Digital Frequency Synthesizers for Parallelism)

  • 노승효;이찬호
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.951-954
    • /
    • 1999
  • A direct digital frequency synthesizer is designed in full custom method using 0.65${\mu}{\textrm}{m}$ CMOS n-well technology The chip provides the capability of the parallel operation using up to 4 chips with an operation frequency of 440MHz. The generated waveform can be modulated by various modulation techniques such as QPSK, 256 . 64. 32 . 16 QAM and FM.

  • PDF

A CMOS Charge Pump Circuit with Short Turn-on Time for Low-spur PLL Synthesizers

  • Sohn, Jihoon;Shin, Hyunchol
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권6호
    • /
    • pp.873-879
    • /
    • 2016
  • A charge pump circuit with very short turn-on time is presented for minimizing reference spurs in CMOS PLL frequency synthesizers. In the source switching charge pump circuit, applying proper voltages to the source nodes of the current source FETs can significantly reduce the unwanted glitch at the output current while not degrading the rising time, thus resulting in low spur at the synthesizer output spectrum. A 1.1-1.6 GHz PLL synthesizer employing the proposed charge pump circuit is fabricated in 65 nm CMOS. The current consumption of the charge pump is $490{\mu}A$ from 1 V supply. Compared to the conventional charge pump, it is shown that the reference spur is improved by dB through minimizing the turn-on time. Theoretical analysis is described to show that the measured results agree well with the theory.

직접 디지털 주파수합성기의 ROM 크기를 줄이는 새로운 방식 (A New Method to Reduce the Size of the ROM in Direct Digital Frequency Synthesizers)

  • 강형주;박인철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.267-270
    • /
    • 1999
  • In this paper, a new method to reduce the size of ROM in the direct digital frequency synthesizer (DDFS) is proposed. In the case that ROM is used for sinusoidal value calculation, reducing the size of ROM is significant. So the power consumption is affected mostly by its bit width. In the proposed method, the ROM bit width is reduced by 1 bit using the phase subtraction and the approximation. The spurious level is better than 80㏈c and the power consumption estimated is 510㎼/MHz.

  • PDF

레이더용 주파수합성기의 위상잡음 모델링 및 분석 (Modeling and Analysis of the Phase Noise in a Frequency Synthesizer for a Radar System)

  • 김동식;김민철;이수호;정명득;권호상
    • 한국군사과학기술학회지
    • /
    • 제14권5호
    • /
    • pp.818-824
    • /
    • 2011
  • In this paper, we proposed a phase noise model of a frequency synthesizer for a radar system. Especially, it was proposed a phase noise model in a DAS(Direct Analog Synthesizer) and a frequency up converter system using Leeson's model. The proposed phase noise model was derived from the measurement data of model 1 and evaluated by adapting to model 2 and model 3 frequency synthesizers. The prediction phase noise by modeling was totally matched to the measured data and the effective analysis of the phase noise was done in a frequency synthesizer and a frequency converter of radar system.