• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.73-76
• /
• 2006

액체 로켓엔진에서의 고주파 연소불안정 제어를 위한 수동 안정화 제어 기구로 음향공을 적용하여 감쇠 효과의 적합성을 검증하였다. 음향공의 기하학적 형상에 따른 음향 감쇠 효과를 비교하기 위하여, 주요 설계 변수를 변화시킨 음향공 모델에 대해 유해 공진주파수 감쇠 효과를 정량적으로 비교, 분석하였다. 선형음향해석과 실험적 방법 모두 만족할만한 일치성을 나타내었으며, 오리피스 입구 면적이 가장 크거나 오리피스 길이가 가장 짧은 경우에서 감쇠 효과가 가장 크게 나타났다. 결론적으로 음향공을 이용한 최적의 음향공 제어를 위해서는 음향공 부피를 고려한 최적기 음향공 설계가 절대적으로 필요함을 입증한다.

• 대한기계학회논문집
• /
• 제19권11호
• /
• pp.2981-2994
• /
• 1995

In order to elucidate the effects of positive pressure gradient on flame properties, structure and stabilization, an experimental study is made on turbulent diffusion flame stabilized by a circular cylinder in a divergent duct flow. A commercial grade gaseous propane is injected from two slits on the rod as fuel. In this paper, stabilization, characteristics and flame structure are examined by varying the divergent angle of duct. Temperature, ion current and Schlieren photographs were measured. It is found that critical divergent angle is expected to be about 8 ~ 12 degree through blow-off velocity pattern to divergent angle and the positive pressure gradient influences the flame temperature, intensity of ion current and eddy structure behind the rod. With the increase of divergent angle, typical temperature of recirculation zone is low but intensity of ion current is high in shear layer behind rod. Energy distributions of fluctuating temperature and ion current signals turn up low frequency corresponding to large scale eddies but high frequency corresponding to small scale eddies as well as low with the increase of divergent angle. Therefore the flame structure becomes a typical distributed-reacting flame.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.459-474
• /
• 2019

This study develops a novel recursive algorithm to significantly enhance the computation efficiency of a recently proposed stochastic subspace identification (SSI) methodology based on an alternative stabilization diagram. Exemplified by the measurements taken from the two investigated office buildings, it is first demonstrated that merely one sixth of computation time and one fifth of computer memory are required with the new recursive algorithm. Such a progress would enable the realization of on-line and almost real-time monitoring for these two steel framed structures. This recursive SSI algorithm is further applied to analyze 20 months of monitoring data and comprehensively assess the environmental effects. It is certified that the root-mean-square (RMS) response can be utilized as an excellent index to represent most of the environmental effects and its variation strongly correlates with that of the modal frequency. More detailed examination by comparing the monthly correlation coefficient discloses that larger variations in modal frequency induced by greater RMS responses would typically lead to a higher correlation.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.33-39
• /
• 2019

We report development of a frequency-stabilized mid-infrared continuous-wave (cw) optical parametric oscillator (OPO) based on a fan-out grating MgO:PPLN crystal pumped at 1064 nm. The OPO resonator was designed as a pump-enhanced standing-wave cavity that resonates to the pump and signal beams. To realize stable operation of the OPO, we applied a modified Pound-Drever-Hall technique, which is a well-known method for powerful laser frequency stabilization. Tuning a poling period of the fan-out grating of the crystal allows wavelength-tunable OPO outputs from 1510 nm to 1852 nm and from 2500 nm to 3600 nm for signal and idler beams, respectively. At the idler wavelengths of 2500 nm, 3000 nm and 3500 nm, we achieved more than 50 mW of output powers at a pumping power of 1.1 W. The long-term stability of the OPO was confirmed by recording the power and wavelength variations of the idler for an hour.

• 한국의류산업학회지
• /
• 제7권2호
• /
• pp.225-230
• /
• 2005

This research was undertaken to compare basic bodice prototypes for Internet shopping customer, and to select a profitable fit vacant space quantity between clothing and body. A total one hundred of eighteen outfits (4 types of pattern ${\times}$ 9 subjects ${\times}$5 body areas) were constructed with basic bodice drafting method of Japan Bunka Women's University according to nine male body types. Fifty-two experts analysis of the different prototypes as five body area and evaluate the most appropriate ease amount and stabilization of the simulation images on the computer. The experiments with automated methods using simulation image are based on AZ program of TORAY, Japan. Data was analyzed using percentiles, frequency and $X^2$. Taken together, the present result of vacant space quantity and stability evaluation through images shows that there is a significant difference in the size variation of the chest circumference, shoulder slope and waist circumference. In case of ease amount, chest area, shoulder slope, waist area and armhole except neckline area were shown more appropriate on the basic bodice pattern without size change. In case of stabilization, the chest area, shoulder slope and armhole except waist area and neckline area was shown the best on the basic bodice pattern without size change. However the waist area was shown on the basic bodice pattern plus 2 cm, neckline was shown more appropriate on the basic bodice pattern plus 1cm.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1236-1247
• /
• 2017

In this paper, we propose a method for evaluating the uncomfortable shaking in the video. When you shoot a video using a handheld device, such as a smartphone, most of the video contains unwanted shake. Most of these fluctuations are caused by hand tremors that occurred during shooting, and many methods for correcting them automatically have been proposed. It is necessary to evaluate the shake correction performance in order to compare the proposed shake correction methods. However, since there is no standardized performance evaluation method, a correction performance evaluation method is proposed for each shake correction method. Therefore, it is difficult to make objective comparison of shake correction method. In this paper, we propose a method for objectively evaluating video shake. Automatically analyze the video to find out how much tremors are included in the video and how much the tremors are concentrated at a specific time. In order to measure the shaking index, we proposed jitter modeling. We applied the algorithm implemented by Optical Flow to the real video to automatically measure shaking frequency. Finally, we analyzed how the shaking indices appeared after applying three different image stabilization methods to nine sample videos.

• Journal of Oral Medicine and Pain
• /
• 제13권1호
• /
• pp.5-12
• /
• 1988

The purpose of this study was to evaluate the therapeutic effect of occlusal stabilization splint on the clinical symptoms and the condylar movement in patients with Temporomandibular Disorders(TMD). For the study, 15 TMD patients treated with stabilization splint and followed up were selected. The age of them was from 18 to 65 years and the mean period of treatment was 2.9 months. The author examined signs and symptoms of TMD according to Dr. Friction's evaluation from and recorded the condylar paths with Denar pantronic before and after splint therapy. The obtained results were as follows : 1. On the first visit, 11 patients(73.3%) showed muscle tenderness on palpation and the frequency was lateral pterygoid, masseter, medial pterygoid, temporalis, sternocleidomastoideus in the order named. 2. Occlusal stabilization splint was more effective in pain relief(100%) than in other dysfunction improvement(85.7%) 3. The amount of maximum opening increased from 37.1㎜ to 42.2㎜, but those of protrusion and laterotrusion changed little. 4. Pan. PRI scores decreased from 32.9 to 21.8, which meant improved reproducibility of mandibular border movements, and the group with sever dysfunction category showed more decrease in score than the group with moderate or slight dysfunction category.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.42-46
• /
• 2008

Ionizers are essential in various areas of manufacturing industries to protect electrostatic hazards and to reduce inferior products. For ion sources used in the charge neutralizers, there are corona discharge, soft X-ray, ultraviolet and glow discharge. Glow discharge has lots of attractive properties, such as lower discharge sustaining voltage, no generation of ozone, and so on. In this paper, we did an experimental study to trace the mechanism and stabilization of atmospheric pressure glow discharge using the several size and shape of electrodes. As an experimental result, to sustain conditions of atmospheric pressure glow discharge is that discharge voltage is 360V, discharge current is 12mA, apply frequency is 1kHz between electrodes when positive electrode is molybdenum(Mo) and negative electrode is copper(Cu). We confirmed that the mechanism and stabilization of atmospheric glow discharge is deeply concerned with the shape and material of electrode for discharge. Especially, glow discharge in atmospheric pressure was well generated and sustained according with the physical properties used electrode materials, example melting point, thermal conductivity, and etc.

• 융합신호처리학회논문지
• /
• 제13권2호
• /
• pp.77-82
• /
• 2012

본 논문은 얼굴 검출 시스템에서 검출된 얼굴의 크기와 위치 정보를 이용한 얼굴 영역 안정화 알고리즘의 하드웨어 구현에 관한 것이다. adaboost 알고리즘을 이용한 얼굴 검출 시스템은 입력되는 영상을 이용하여 얼굴이라고 판단될 수 있는 템플릿 패턴, 얼굴 특징을 추출 하거나 미리 학습된 데이터와 비교하여 얼굴을 검출한다. 하지만 미세한 흔들림에도 얼굴 정보의 위치나 크기가 달라진다. 검출된 얼굴 영역의 안정화를 위해서 본 논문은 검출된 현재 얼굴 정보와 이전 프레임의 얼굴 정보를 기반으로 얼굴 영역의 흔들림을 줄이는 고주파 억제 필터, 얼굴 거리와 영역 비교, 얼굴 영역 확대-축소 연산을 이용한 얼굴 검출 안정화 하드웨어를 구현하여 실시간으로 피드백이 가능하도록 하였다.

• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.438-445
• /
• 2007

액체로켓엔진에서 발생하는 고주파 연소 불안정 제어를 위한 수동 안정화 제어 기구로 음향공을 적용하여, 선형 음향 해석 및 상온 음향 실험을 통해 감쇠 효과의 적합성을 검증하였다. 단일 음향공의 기하학적 형상에 따른 음향 감쇠 효과를 비교하기 위하여 오리피스 직경, 길이를 변화시킨 몇 가지 음향공 모델에 대해 유해 공진주파수 감쇠 효과를 정량적으로 비교, 분석하였다. 다음으로 음향공의 개수에 따른 음향 감쇠 효과를 비교하였다. 주파수 응답함수를 통한 유해주파수 감쇠 성능은 개수 증가에 따라서 우수해졌지만 흡음계수를 통한 최적의 효율 관점에서 볼 때 오히려 과도한 댐핑으로 인한 해당 주파수의 감쇠 효율이 낮아지는 경향이 발생한다. 결론적으로 음향공을 이용한 제어를 위해서는 유해주파수를 감쇠시킬 수 있는 기하학적 형상을 통한 정확한 동조가 필요하다. 또한, 부피의 제약을 고려한 최적의 효율을 발휘할 수 있는 음향공의 형상 설계와 개수의 선택이 절대적으로 필요함을 입증한다.