• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.225-230
• /
• 2013

This paper presents a novel shunt radio frequency microelectromechanical system switch on a quartz substrate with stiff ribs around the membrane. The buckling effects in the switch membrane and stiction problem are the primary concerns with RF MEMS switches. These effects can be reduced by the proposed design approach due to the stiffness of the ribs around the membrane. A lower mass of the beam and a reduction in the squeeze film damping is achieved due to the slots and holes in the membrane, which further aid in attaining high switching speeds. The proposed switch is optimized to operate in the k-band, which results in a high isolation of -40 dB and low insertion loss of -0.047 dB at 21 GHz, with a low actuation voltage of only 14.6 V needed for the operation the switch. The membrane does not bend with this membrane design approach. Finite element modeling is used to analyze the stress and pull-in voltage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1255-1260
• /
• 2011

In this paper, we study on the reliability of Very High-rate Power Line Communication (VH-PLC) for Smart Grid, so that the resultant data rate is over 400Mbps at a physical layer. Firstly, reviewing the research trend of the PLC, we discuss the required techniques for supporting the Smart Grid. Considering a pre-specification with the value of several parameters, we investigate a multi-carrier modulation technique to overcome limitations of higher rate transmission under power line channel environments. Then, we propose a system specification of the VH-PLC in the sense of enhancing two features. One is resolving the problem of the co-existence of the deployed high-speed PLC according to the published standardization of KS X 4600-1 in Korea. The other is getting better performance on the grid adopting the diverse element techniques, such as multi-carrier modulation, a subcarrier utilization mode, a variable rate LDPC (Low Density Parity Check) code, and a time and frequency diversity technique. Further, a simulation tool, composed of an Event-Driven simulator and a Time-Driven simulator, is developed for the purpose of verifying the system performance and continuously cross-checking the test bench signal of the proposed VH-PLC system.

• Korean Institute of Interior Design Journal
• /
• v.24 no.3
• /
• pp.129-136
• /
• 2015

Korea is changing rapidly from a single-raced nation into a multi-national nation caused by the huge number of immigrants mostly from China, and Southeast Asian countries. Therefore, various social problems are expressed ostensibly, one of them is a difficulty suffered by children of the second generation of multi-cultural families who enroll to elementary schools in Korea. This should be solved urgently as it is predicted to be an unavoidable problem in future. Only by understanding and accepting mutual cultural differences will be the solution to various problems caused by multi-cultural society. This study aims to understand the differences of emotion about the spatial images. This study was target to Korean and Malaysian design students to perform vocabulary appraisals on the spatial images in school health rooms which used to perform various functions for education, counseling, treatment, etc. The emotional vocabularies used at the appraisal for emotion are based on IRI image languages, which were extracted by the experts, and frequency was progressed by the SPSS 12.0 application. The collected data will be compared and analyzed to ensure the reliability.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.151-157
• /
• 2017

In this paper, it is the result of analysis of the stability by power system analysis about the influence on the power system when the southwest - offshore wind power demonstration complex is constructed to 60MW and it is linked with the onshore power system. Considering the position of the wind turbine actually installed and the length of the cooperating line, we modeled the wind generators, offshore substation and the turbine step-up transformer. Changes of voltage when internal and external faults occurred is analyzed and the reactive power demand according to the amount of electricity generation is derived. And also phase angle stability and frequency is observed through a transient analysis. This paper clarify that there is no problem in the system when only offshore wind power is linked with the grid and try to present the reactive power amount necessary for maintaining the voltage of the point of cooperation appropriately.

• Journal of Korea Multimedia Society
• /
• v.21 no.10
• /
• pp.1182-1194
• /
• 2018

The Dynamic Adaptive Streaming over HTTP(DASH) is envisioned to evolve to meet an increasing demand on providing seamless video streaming services in the near future. The DASH performance heavily depends on the client's adaptive quality selection algorithm that is not included in the standard. The existing conventional algorithms are basically based on a procedural algorithm that is not easy to capture and reflect all variations of dynamic network and traffic conditions in a variety of network environments. To solve this problem, this paper proposes a novel quality selection mechanism based on the Deep Q-Network(DQN) model, the DQN-based DASH Adaptive Bitrate(ABR) mechanism. The proposed mechanism adopts a new reward calculation method based on five major performance metrics to reflect the current conditions of networks and devices in real time. In addition, the size of the consecutive video segment to be downloaded is also considered as a major learning metric to reflect a variety of video encodings. Experimental results show that the proposed mechanism quickly selects a suitable video quality even in high error rate environments, significantly reducing frequency of quality changes compared to the existing algorithm and simultaneously improving average video quality during video playback.

• Korean Journal of Artificial Intelligence
• /
• v.5 no.2
• /
• pp.26-42
• /
• 2017

This study perceived that there are limits to prompt and accurate monitoring when an accident occurs and the correct information of egg production stage, such as the date of spawning, cleaning, and refrigerating cannot be identified, since eggshell codes using barcode only show numbers identifying a city and province and the name of producers. To fix this problem, this study partially suggested the RFID (Radio Frequency Identification) technology and IoT-based Connected System. The proposed system in this study shares data with related agencies as the system of agricultural and livestock product information runs as the main server, and the database information of the proposed system is provided by farmhouses, distributors, and sellers. Through various media such as a webpage or mobile application built to provide the relevant information, customers can search and obtain information about agricultural and livestock products they want. Since the information on an entire process is open to the public, information ranging from simple to clear, additional ones such as hazardous elements can be viewed.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.71-84
• /
• 2000

The objective of this research is to investigate the relation between the parenting stress, recognized by the working mothers, and associated variables systematically. For the purpose, I analyzed the demographic of the working mothers and surrounding variables at the levels of microsystem, mesosystem, and macrosystems, to relate with respect to the parenting stress problem. The research composes the sample space of working mothers having children less than 6 years old. The data were analyzed by the statistical method based on frequency, percentile, Pearson's correlation, hierachical and multiple regression. The main results of the research can be summarized as follows: According to the independent effects of diverse ecological systematic variables, there are shown that 11 independent variables can describe about 55.6% of the parenting stress of the working mothers. Among these variables, 'satisfaction about the child care' is the most significant factor, which covers about 34.5%. Additionally, the next significances are observed from such variables as 'temperament of children' (8.2%), 'satisfaction of marriage' (5.1%), 'support of spouse' (1.5%), 'level of education' (1.9%) and so on. In conclusion, it is strongly recommended to compensate and restructure the child care systems more systematically, to afford more reliable parenting environment to the dual earner mothers and fathers and children simultaneously.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.208-213
• /
• 2010

This paper deal with an analysis of the ground surface potential profiles using a hemispherical scaled-model. Because it is very difficult to draw valid conclusions concerning a general grounding problem from actual field data, scale model tests can be used to determine the ground surface potential profile around the grounding electrodes according to the configuration of grounding electrodes. In this work, a hemispherical vessel with a diameter of 1,100 [mm] was employed to simulate uniform soil and CDEGS program was employed to compare the measured and simulated results. As a result, the ground surface potential around the grounding electrode was significantly raised and the ground surface potential at the just upper point of ground electrode particularly was higher than other points. The ground surface potential of counterpoise was higher than other grounding electrodes such as mesh and grounding rods and the ground surface potential strongly depends on the frequency responses of grounding electrodes. Also the results measured with the small-sized model were in reasonably agreement with the data obtained from simulation.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2003.10a
• /
• pp.133-138
• /
• 2003

The prediction of protein secondary structure has been an important bioinformatics tool that is an essential component of the template-based protein tertiary structure prediction process. It has been known that the predicted secondary structure information improves both the fold recognition performance and the alignment accuracy. In this paper, we describe several novel ideas that may improve the prediction accuracy. The main idea is motivated by an observation that the protein's structural information, especially when it is combined with the evolutionary information, significantly improves the accuracy of the predicted tertiary structure. From the non-redundant set of protein structures, we derive the 'potential' parameters for the protein secondary structure prediction that contains the structural information of proteins, by following the procedure similar to the way to derive the directional information table of GOR method. Those potential parameters are combined with the frequency matrices obtained by running PSI-BLAST to construct the feature vectors that are used to train the support vector machines (SVM) to build the secondary structure classifiers. Moreover, the problem of huge model file size, which is one of the known shortcomings of SVM, is partially overcome by reducing the size of training data by filtering out the redundancy not only at the protein level but also at the feature vector level. A preliminary result measured by the average three-state prediction accuracy is encouraging.

• International Journal of Costume and Fashion
• /
• v.4
• /
• pp.47-61
• /
• 2004

This study analyzed the buying patterns of American and Korean female college students in terms of criteria for clothing selection； store preferences； criteria for store selection； fashion information sources； expressions of customer dissatisfaction； purchasing frequency and motivations for purchasing clothes. The study was implemented through self-administered questionnaires which were back translated for validity. The samples consisted of 730 female college students majoring in the fields related to clothing and textiles： 310 U.S. and 412 Korean students. Likert scales were used for most measures with 1＝never or very unimportant and 5＝always or very important. Data were analyzed by factor analysis, analysis of covariance, Duncans multiple comparison, and t-test. Results are as follows： 1) Design factor was the most important criteria in clothing selection with no differences between country groups. There were, however, significant differences for psychological exhibition factors, practical and economic factors. 2) Both groups preferred specialty and department stores, with department stores more popular in Korea. 3) Merchandise was the most important store selection criterion and fashion magazines and self-experience were rated as the most important information sources for the both groups. 4) Korean group expressed their dissatisfaction with and observable problem with a product before purchase more often than U.S. group, but the U.S. group was more vocal about color loss or shrinkage after care procedures. 5) Some clear differences between the two countries emerged. Marketers targeting American consumers should pay more attention to practicality and service； to Korean consumers more symbolic meaning of products.