• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.1035-1041
• /
• 2017

In magnetic resonance-based wireless power transfer (WPT) systems, frequency splitting phenomenon, in which power transfer efficiency (PTE) decreases seriously as resonators are close to each other, is the problem that we should address for reliable power transfer in short distance. In this paper, we present WPT systems using an equivalent circuit model and analyze PTE and marginal coupling coefficient ($k_{split}$) where the frequency splitting occurs. In addition, we perform circuit-level simulations using Advanced Design System, and show that the achievable PTE is different for the structures of resonators when k>$k_{split}$. We confirm that higher PTE can be ensured as k increases in the case of identical resonators, while PTE is degraded as k increases in the case of non-identical resonators. Therefore, in short distance, in which k>$k_{split}$, it is more efficient for achieving reliable PTE to use identical resonators rather than non-identical resonators.

• Survey Research
• /
• v.10 no.1
• /
• pp.113-139
• /
• 2009

It is desirable to use a monthly benchmarked construction indicator which contains the characteristics of statistical data in an annual survey in order to analyze the cyclical phenomenon of the construction activity. The benchmarked indicator is expected to improve the data quality in terms of accuracy, consistency, comparability, and completeness. In this paper, benchmarking methodologies of compiling monthly construction indicators arc researched by using a monthly prompt data holding short - term fluctuations and an annual survey data regarded as more accurate statistics than monthly data. The benchmarking is the methodology by which a high frequency data should he adjusted in order to hold the short-term and cyclical phenomena, and the long - term trend of two data groups with ensuring the consistency of an annual summation between a high frequency data and a low frequency data. This paper considered the numerical approach like pro rata distribution method, proportional Denton method, EFL or HP filter Benchmark - to - Indicator ratio method, and the model - based approach such as Chow and Lin method, $Fem{\acute{a}}ndez$ method. Also, the benchmarked construction indicators were estimated by early mentioned benchmarking methods with practical data, and these methods were empirically reviewed and compared. In case of construction indicators with severe seasonal fluctuations and irregulars, the numerical approach seemed to be performed more correctly than the model- based approach. Among numerical methods, the proportional Denton method used in general was a little nice. The HP filter Benchmark - to - Indicator ratio method may be considered with survey errors or measurement errors in an annual survey data.

• Journal of Navigation and Port Research
• /
• v.40 no.1
• /
• pp.43-50
• /
• 2016

Amid of the logistics hub center competition is going to intensifying between the world major port, it is essential to pre-occupied the base in the logistics hub world take advantage of advanced technology of logistics equipment than other ports. In existing container terminal, when container moves the terminal use the omnidirectional and directional antenna in order to exchange data information on the basis of 802.11 wireless network system. Case of loading height of exceeding, the blind sport will occur and a limited frequency channel can't help using in the area. A limited frequency channel usage and nested areas happen to use the closed terminal, it has a great influence to operate the terminal working. In this paper, LTE network is configured provided by the specified company ('L' Corp,.Ltd) and terminal data extracted through LBO (Local Breakout) in the cell site which is configured directly with container terminal operation server. Using this method, container terminal yard equipment operate without overlapping arises with uninterrupted data presented for ways to efficiently. I would suggest both the existing wireless AP LAN configuration of container terminal and new LTE system and applied to the real yard operating devices situations. Through these methods presented comparative the existing network traffic with new constructed LTE configuration. I admired to suggest that wireless network LTE introduction is fundamental factors to get rid of the blind spot, the problem of limited frequency channel and overlapping arises. These essential points can be a continual improving terminal services and more efficient terminal operational management.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.505-508
• /
• 2016

In city, tracing of power transmission lines is difficult due to compound installation of overhead and underground lines, transposition, bad view caused by trees or big buildings. It is hard problem for electrical technician on site to trace power transformers or power lines to serve customers in 3 phase -4 wires power distribution systems. It is necessary that the correct and fast tracing method is required for load balancing among distribution lines. Old technology use to trace lines with high power impulse injection. Our proposed method uses to trace lines with very small power high frequency signal injection. Simulation models for 3-phase power transformers, 3-phase wire lines, and customer loads are described to investigate the transmission characteristics of high frequency power line carrier. Distribution lines have only a limited ability to carry higher frequencies. Typically power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.271-287
• /
• 2003

Statement of problem: Resonance frequency analysis (RFA) has been increasingly served as a non-invasive and objective method for clinical monitoring of implant stability. Many clinical studies must be required for standardized baseline data using RFA. Purpose: This study was performed to evaluate RFA value changes in two stage surgery group and one stage surgery group in patients. Material and method: Forty-seven mandibles in consecutively implant installed patients were selected for this study and 141 fixtures were installed. Ninety-three fixtures were double threaded, machined surface design ($Br{\aa}anemark^{(R)}$ MK III, Nobel Biocare AB, Goteborg, Sweden) and 48 fixtures were root form, threaded, HA-coated surface one ($Replace^{TM}$, Steri-Oss/Nobel Biocare AB, USA). Among those, each 10 fixture was installed in one stage group patients. ISQ values were measured using $Osstell^{TM}$ (Integration Diagnostics Ltd. Sweden) during fixture installation, at healing abutment connection and in the loading period for two stage surgery group patients and during at each 4, 6, 8, 10, 12week and in the loading phase for one stage surgery group patients and evaluated the changes according to the time and fixture type. Results: In two stage surgery group, mean and SO of ISQ values of machined surface implants were $76.85{\pm}3.74,\;75.76{\pm}5.04,\;75.73{\pm}4.41$ and those of HA-coated surface implant were $75.05{\pm}6.23,\;77.58{\pm}5.23,\;78.32{\pm}4.29$ during fixtures installation, at healing abutment connection and in the loading period, respectively. In one-stage surgery group, the ISQ values of machined surface and HA-coated surface implants decreased until 4 or 6 week and maintained at plateau for 1-3 week and increased to the loading period. Conclusions: Machined and HA-coated surface implants showed minimal ISQ changes with time if they were installed at the sites showing at least intact cortical plate and good bone qualities. And HA-coated implants had a tendency to show somewhat increased ISQ values with time.

• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.249-263
• /
• 2013

This study was performed to analyze the perception, preference and intake frequency of Jangachi(Korean Pickle) in order to develop low salt healthy Jangachi(Korean pickle). The findings are summarized as follows: The reason for eating Jangachi was 'Stimulation of appetite(47.8%).' The problem of commercial Jangachi was 'having high Na and sodium contents(59.1%).' The most influential improvement points for development of low-sodium Jangachi was 'Sanitarily distributed,' followed by 'not too salty,' 'low price,' and 'safe to store.' The important items of manufacture factor for making low-sodium Jangachi were safety(4.36 points), sanity, safekeeping and storage, and quality of ingredients. The important items of quality factor were taste(4.30 points), salinity, nutrition and temperature. The most preferred and frequently intake Jangachi was 'garlic Jangachi', followed by 'perillar leaf Jangachi', 'dried radish Jangachi', 'onion Jangachi', 'pepper Jangachi', 'garlic stem Jangachi', 'cucumber Jangachi', 'radish Jangachi', and 'soy leaf Jangachi'.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.113-122
• /
• 2010

In this paper, we propose a CP (Cyclic Prefix) detection based SSS (Secondary Synchronization Signal) detection method for initial cell search in 3GPP LTE (3rd Generation Partnership Project Long Term Evolution) FDD/TDD (Frequency Division Duplex/Time Division Duplex) dual mode downlink receiver. In general, a blind coherent SSS detection method which can detect SSS without CP detection is applied. However, coherent detection method caused performance degradation by channel compensation error at high speed environment because it uses estimated CFR (Channel Frequency Response) at PSS (Primary Synchronization Signal), and it can be more serious problem in TDD mode due to increased distance between PSS and SSS. Also blind detectionhas the drawback of high computational complexity. Therefore, we proposed a CP type pre-decision structure with non-coherent SSS detection which has stable operation in high speed channel environments for 3GPP LTE TDD mode as well as FDD mode, and can reduce computational complexity by applying CP detection before SSS detection. Simulation results show that the proposed method has stable operation for 3GPP LTE TDD/FDD dual mode downlink receiver in various channel environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.715-725
• /
• 2010

Orthgonal Frequency Division Multiplexing(OFDM) system is effective for the high data rate transmission in the frequency selective fading channel. In this paper we propose PAPR(Peak to Average Power Ratio) reduction method of problem in OFDM system used Fuzzy theory that often control machine. This thesis proposes PAPR reducing method of OFDM system using Fuzzy theory. The advantages for using Fuzzy theory to reduce PAPR are that it is easy to manage the data and embody the hardware, and required smaller amount of operation. Firstly, we proposed simple algorithm that is reconstructed at receiver with transmitted overall PAPR which is reduced PAPR of sub-block using Fuzzy. Although there are some drawbacks that the operation of the system is increased comparing conventional OFDM system and it is needed to send the information about Fuzzy indivisually, it is assured that the performance of the system is enhanced for PAPR reducing. To evaluate the perfomance, the proposed search algorithm is compared with the proposed algorithm in terms of the complementary cumulative distribution function(CCDF) of the PAPR and the computational complexity. As a result of using the QPSK and 16QAM modulation, Fuzzy theory method is more an effective method of reducing 2.3 dB and 3.1 dB PAPR than exiting OFDM system when FFT size(N)=512, and oversampling=4 in the base PR of $10^{-5}$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2017

In this paper, we evaluate the basic test results of the 32 Gbps observational equipment introduced as the back-end system for the wideband VLBI (Very Long Baseline Interferometry) observation of KVN (Korean VLBI Network). Radio astronomers want to make a large radio telescope that has excellent performance in order to observe the superfine structure of a celestial body, but a lot of money is needed. Therefore, in order to increase the sensitivity, the performance improvement of the receiving system and the method of observing the wide frequency bandwidth are introduced. To do this, we adopted a wideband sampling method for converting analog signals to digital with ultra-fast speeds and a wideband sampler for performing digital filtering in order to observe a wide observational frequency bandwidth. The wideband sampler (OCTAD-K) supports up to 16 Gsps-2bits sampling and supports a variety of observational bandwidth using digital filtering techniques. In particular, it is designed to support KVN's 4-frequency simultaneous observation system and VERA(VLBI Exploration of Radio Astrometry)'s 2-beam observation system. It can also support polKVN(Korean VLBI Network), KaVA(KVN and VERA Array), 32Gbps Direct Sampler, Digital Filter, Widebandarization observations and supports the standard VDIF(VLBI Data Interchange Format) format of observed data. In this paper, the performance of the system and the problem solving are described in detail after performing the factory inspection and field test before the system is introduced.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.17-27
• /
• 2021

The aim of this research was to identify the issue of the work permit system and consciousness of the people on the system, and to suggest some ideas on the government policies on it. To achieve the aim of research, this research used text mining based on social data. This research collected 1,453,272 texts from 6,217 units of online documents which contained 'work permit system' from January to December, 2020 using Textom, and did text-mining and social network analysis. This research extracted 100 key words frequently mentioned from the analyses of data top-level key word frequency, and degree centrality analysis, and constituted job problem, importance of policy process, competitiveness in the respect of industries, and improvement of living conditions of foreign workers as major key words. In addition, through semantic network analysis, this research figured out major awareness like 'employment policy', and various kinds of ambient awareness like 'international cooperation', 'workers' human rights', 'law', 'recruitment of foreigners', 'corporate competitiveness', 'immigrant culture' and 'foreign workforce management'. Finally, this research suggested some ideas worth considering in establishing government policies on the work permit system and doing related researches.