• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.693-696
• /
• 2008

The systems for mobile communication services of fourth generation use OFDM (Orthogonal Frequency Division Multiplexing) scheme that ran transmit large amounts of data to support the multimedia services, and consist of several types of cell, such as Macro Cell, Pico Cell, Femto Cell to improve the qualify of service. According to subdivision of communication region, superposition of cells in co-channel different from conventional single cell is used, but it cause inter band interference between systems. In particular, an OFDM signal consists of a number of independently modulated subcarriers, and superposition of these subcarriers causes a problem that ran give a large PAPR. Increased PAPR induces signal distortion passing through components such as power amplifier so that inter band interference is caused by out-of-band spectrum radiation. In order to minimize the inter band interference, this paper applies PAPR reduction scheme and analyzes the out-of-band spectrum radiation when the signal passes through nonlinear components such an power amplifier.

• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.350-364
• /
• 2008

Single frequency network (SFN) design based on the Advanced Television Systems Committee (ATSC) specification, a terrestrial digital television (DTV) system, normally causes a interference problem, among signals from multiple transmitters or repeaters. To solve this, the ATSC recommended practice (RP) introduces a transmitter identification (TxID) signal embedded in a signal from each transmitter or repeater. A TxID signal analyzer is then used to detect the TxID signal, and following the analysis results, a SFN design can be adjusted. This paper discusses the generation and usages of Kasami sequence, is used the TxID signal. The configuration of the TxID signal analyzer to efficiently detect TxID signal is proposed and the results of theoretical performance analysis are provided. Moreover, computer simulation and laboratory test results are provided to evaluate the performance of TxID signal analyzer and the theoretical performance analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.5
• /
• pp.71-85
• /
• 1993

The Cycloconverter that the author is going to treat in this paper, has strong advantages over the D.C. Link Inverter in points of chattering torque problem and natural commutation. Thus, the Cycloconverter is expected to be well applied to large and low-speed machines which require better speed control at low frequency. But the control circuit of Cycloconverter has two weak points described as follows. 1) Because of its rather complicated control circuit, it is likely to be illoperating due to unexpected noise signals, thus the higher the accuracy and reliability of the circuit is required to be, the more the circuit may cost. 2) Because the load current is not purely sinusoidal, the Cycloconverter may possibly be destroyed in case of inaccurate convert switching resulted from the difficulties in detecting the load current-zero and the current direction at the moment. In this paper, the author first of all intends to design and build a modified VVVF-type Noncirculating Current Cycloconverter to which recently proposed control methods are applied for improving the circuit simplicity, the control performance, and the system reliability. And then, experiments for observing the output waveforms of the Cycloconverter which is controlled by Singled-Board Computer using 8086 16-bit microprocesser are carried out. Finally the author concludes the result of this study as follows. 1) By replacing the conventional analog control circuits such as Reference Wave Generator, Cosine Timing Wave Generator, and Comparator with softwares, a great circuit simplicity is achieved. 2) The output of the designed Cycloconverter changes its frequency very fast without showing discontinuity of its waveform, and this waveform characteristics enables the smooth speed control of Induction Motor. 3) The design control circuit of Cycloconverter can be applied to the systems of 12 or 24 pulses because of its short processing period.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1760-1769
• /
• 1992

An experimental study of thermal transport from a uniformly heated pipe to a pulsating flow has been carried out. Surface of the pipe is imposed with constant heat flux providing by electric heating band. This problem is of particular interest in the design of Stirling engine heat exchangers and in understanding the blood flow in the aorta. Temporal Variatiens of temperature and pressure inside the circular pipe are measured. The dependence of temperature distributions and heat transfer rate on the mean flow rate in the pipe and on the pulsating frequency is investigated in detail. The experimental results indicate that the measured temporal variations of temperature and pressure become nearly sinusoidal The amplitude of temperature variation near the pipe wall is much more substantial than that in core of the pipe. It is also found that the heat transfer rate is increased significantly as the frequency of the pulsating pressure is increased or the mean flow rate in a pipe is increased. The results obtained are also compared with those for non-pulsating flow circumstance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.4
• /
• pp.1-17
• /
• 1998

Most of the tourist resort facilities in our country cannot be used in the winter season, and only a few spa resorts and sky resorts are available in the winter. To ameliorate this problem, various types of winter resort facilities have been constructed since 1970s and the massive development of winter resort facilities changed the resort market from a seller's market to a buyer's market. There has been however,few researches on marketing strategies for winter resorts, and there is a growing need for a rational method to maximize tourists' satisfaction and developers'profit at the same time. This research aims to develop a positining strategy to engance the marketability of winter resorts by classifying the resort market with the self-image types of users, and by analyzing the structure of the market, users' preferences, and locational factors. A survey was conducted with cases of Yong-Pyung resort, Mu-Ju resort, Alps resort, Bears resort, Back-Am spa resort, Su-An-Bo spa resort, and I-Chon spa resort. A list of questions in five categories -- similarity, characteristics, preferences, self-image, and personal characteristics of the respondents -- was constructed and tested. Among the 750 copies of questionnaire distributed, 700 were returned by only 378 were analyzed after screening missing or reckless answers. The statistical analysis of the data were conducted using techniques of correlation analysis, frequency analysis, factor analysis. Factor analysis and cluster analysis were used to group the cluster of self-image and a discriminant analysis were used to confirm this classification. The demographical characteristics were identified by frequency analysis, and resorts attributes were analyzed by oneway ANOVA analysis. Multidimensional scaling methods such as KYST, PROFIT, and PREFMAP were used for the positioning strategy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.460-468
• /
• 2009

Multiple-input multiple-output (MIMO) technology applied with orthogonal frequency division multiplexing (OFDM) is considered as the ultimate solution to increase channel capacity without any additional spectral resources. At the receiver side, the challenge resides in designing low complexity detection algorithms capable of separating independent streams sent simultaneously from different antennas. In this paper, we introduce an upper-lower bounded-complexity QRD-M algorithm (ULBC QRD-M). In the proposed algorithm we solve the problem of high extreme complexity of the conventional sphere decoding by fixing the upper bound complexity to that of the conventional QRD-M. On the other hand, ULBC QRD-M intelligently cancels all unnecessary hypotheses to achieve very low computational requirements. Analyses and simulation results show that the proposed algorithm achieves the performance of conventional QRD-M with only 26% of the required computations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.1013-1019
• /
• 2008

Recently, various information and data are efficiently used by the rapid growth of its Internet in our real life. But, users have spent lots of time finding necessary information for the increased amounts of information. To solve this problem, it can be provided the speed, accuracy of information search with development of intelligent search engines, agent system etc. In this paper, we propose the method of getting the best tender price in the analysis of the construction bid information that needs its professionalism by on the purpose to maximize users' satisfaction. Of course, if it is not under the unit of a results in the future, we put target of this paper on part to heighten supreme successful bid success rate. Therefore, this paper embodies offered system of web based on producing tender price of most suitable through techniques to produce tender price about successful bid that compare with bidder fare by statistical analysis incidental and value approaching successful bidder fare by frequency analysis method.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.913-925
• /
• 2016

In-band wireless full-duplex is a promising technology that enables a wireless node to transmit and receive at the same time on the same frequency band. Due to the complexity of self-interference cancellation techniques, only base stations (BSs) are expected to be full-duplex capable while user terminals remain as legacy half-duplex nodes in the near future. In this case, two different nodes share a single subchannel, one for uplink and the other for downlink, which causes inter-node interference between them. In this paper, we investigate the joint problem of subchannel assignment and power allocation in a single-cell full-duplex orthogonal frequency division multiple access (OFDMA) network considering the inter-node interference. Specifically, we consider two different scenarios: i) The BS knows full channel state information (CSI), and ii) the BS obtains limited CSI through channel feedbacks from nodes. In the full CSI scenario, we design sequential resource allocation algorithms which assign subchannels first to uplink nodes and then to downlink nodes or vice versa. In the limited CSI scenario, we identify the overhead for channel measurement and feedback in full-duplex networks. Then we propose a novel resource allocation scheme where downlink nodes estimate inter-node interference with low complexity. Through simulation, we evaluate our approaches for full and limited CSIs under various scenarios and identify full-duplex gains in various practical scenarios.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.6
• /
• pp.671-678
• /
• 2004

Statement of problem. Reducing treatment time in implant dentistry is a matter of main concern. There are so many factors affecting the success rate of immediate or early loaded implant for the initial bone response. The especially microscopic properties of implant surfaces playa major role in the osseous healing of dental implant. Purpose. The aims of this study were to perform a histologic and histomorphometric comparison of the healing characteristics anodically roughened surface, HA coated surface and RBM surface implant, and to compare of ISQ values measured by $Osstell^{TM}$ for resonance frequency analysis in dogs mandible during 2 weeks. Material and method. Bone blocks from 2 dogs were caught after covered healing for 0 day(2 h); Group I, 1 week; Group II and 2 weeks; Group III. One longitudinal section was obtained for each implant and stained with hematoxylin and eosin. Histomorphometric analysis was done with Kappa Imagebase system to calculate bone-to-implant contact and bone volumes inside the threads. ISQ values were measured in every time of surgery schedule. Conclusion. The experiment revealed that: 1. The percentages of bone-to-implant contact on the fixture in each group were not significantly different(P > 0.05). 2. The percentages of bone area inside the threads on the fixture in each group were not significantly different(P > 0.05). 3. The ISQ level showed clinical stability of each fixture during 2 weeks(all ISQ level ${\geq}71$ ).

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.9-18
• /
• 2008

Web-services have originally been devised to share information as open services. In connection with it, hacking incidents have surged. Currently, Web-log analysis plays a crucial clue role in detecting Web-hacking. A growing number of cases are really related to perceiving and improving the weakness of Web-services based on Web-log analysis. Such as this, Web-log analysis plays a central role in finding out problems that Web has. Hence, Our research thesis suggests Web-DoS-hacking detective technique In the process of detecting such problems through SOM algorithm, the emergence frequency of BMU(Best Matching Unit) was studied, assuming the unit with the highest emergence frequency, as abnormal, and the problem- detection technique was recommended through the comparison of what's called BMU as input data.