• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.86-89
• /
• 2015

Formula acoustic characteristics of the room with a double layer, are compared through simulation and actual measurement. The rear area of the under- balcony speakers will cause a delay difference between the main speaker. In the mid / bass parts do not generate sufficient pressure is lowered and comb-Filtering phenomenon occurs significantly. The lower right area of the under- balcony speakers and speaker distance is the sound pressure of the under- balcony speakers to around 2 ~ 3m bigger than the main speakers and the sound image matches the pulpit is broken. Also, under area is more than 5 ~ 6m from the balcony outside speakers and causes differ by more than 10dB lower than the under- balcony speakers depending on the local laws of Translator wins Well, the main speaker at mid / high frequency sounds do not enter the sound pressure variations will drop by a significant. Appropriate arrangement and the output of the speaker according to the position under the balcony, and output of the main speakers are requested to minimize this problem sound. The proper sound design direction for the under- balcony speakers must be presented in order to improve the lower balcony area more pleasant acoustic environment.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.2
• /
• pp.163-172
• /
• 2002

This article investigates the problem of data preprocessing for the precision orbit determination (POD) of low earth orbit satellite using GPS .aw data. Several data preprocessing algorithms have been developed to edit the GPS data automatically such that outlier deletion, cycle slip identification and correction, and time tag error correction. The GPS data are precisely edited for the accuracy of POD. Some methods of data preprocessing are restricted to the rate of the collections of the pseudorange and carrier phase measurements. This study considers the preprocessing efficiency varied with the rate, the quality of receiver and the altitude of the satellite's orbit. We also propose the proper methods in accordance with the rate for single frequency and dual frequency receivers.

• Journal of KIISE:Software and Applications
• /
• v.26 no.9
• /
• pp.1085-1094
• /
• 1999

이동 분산 환경에서는 무선 데이타 전송 기법을 통하여 사용자들에게 다양한 정보들을 전달하게 된다. 본 논문은 균등 무선 데이타 방송 환경에서, 빠른 시간에 방송데이타를 접근할 수 있는 방법에 대하여 기술한다. 이를 위하여 무선 방송 데이타의 스케쥴링 문제를 정의하고, 어떤 질의가 접근하는 데이타들의 응집 정도를 나타내는 `질의 거리(Query Distance: QD)'라는 측정 기준을 제시한다. 제안한 질의 거리를 사용하여 각 질의의 우선 순위에 따라 해당 질의가 접근하는 데이타 집합을 방송 스케쥴에 추가하면서 스케쥴을 구성하는 데이타 스케쥴링 기법을 제시한다. 데이타 집합의 스케쥴 구성 과정에서 우선 순위가 높은 질의의 질의 거리를 최소화하면서 낮은 우선 순위 질의들의 질의 거리를 줄이는 스케쥴 확장 규칙들을 사용한다. 예를 이용하여 제안하는 방법에 대하여 설명한 후, 실험을 통해 제안한 방법의 성능을 평가한다.Abstract In mobile distributed systems the data on the air can be accessed by a lot of clients. This paper describes the way clients access the broadcast data in short latency in uniform wireless broadcasting environment. We define the problem of wireless data scheduling and propose a measure, named Query Distance(QD), which represents the coherence degree of data set accessed by a query. By using the measure, we give a data scheduling method that constructs the broadcast schedule by appending each query's data set in greedy way. When constructing the schedule, we use schedule expansion rules that reduce the QD's of lower-frequency queries while minimizing the QD's of the higher-frequency ones. With the use of examples we illustrate the mechanism of the proposed method and we test the performance of our method.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1623-1628
• /
• 2015

As the performance of mobile devices has increased, high-end multicore CPUs have become the norm in smartphones. However, such high performance devices are exposed to the problem of battery depletion due to the energy consumption caused by software performance, and despite increases in battery capacity. The required resources are dynamic and varied, and further user interaction is highly random; thus, Linux-based power management such as DVFS is needed to fulfill requirements. In order to reduce power consumption, we propose a method to restrict the CPU frequency of data download while maintaining user reactivity. This can supplement the weakness of existing Linux-based power management techniques like DVFS in relation to webpage loading. Through the implementation of our method at the application level, we confirm that energy consumption from webpage loading is reduced.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.277-279
• /
• 2005

Recently, due to the increase of power conversion devices and nonlinear loads with the development of information, communication and control technologies, the instantaneous minute interruption factors such as voltage & current harmonics, surge occurring frequency, instantaneous voltage variation, voltage unbalance, flicker etc. have greatly threatened the power quality, and the deterioration of electric power facilities and the functional error of controllers are increasing. As such an instantaneous minute interruption appears to be small and local, accurate evaluation with measurement is difficult and total analysis system is required through a wide range of power quality effect analysis such as the simultaneous measurement on various power supply phenomena and the analysis on the interrelation with system loads. Most of conventional power quality diagnosis equipments have beer developed and applied, which were able to measure the stability rate of frequency, the stability rate of voltage, the electricity-failure duration etc, However, they were insufficient to analyze the system present situation, understand the cause of the failure occurred by the problem of power quality and analyze out the phenomena. Accordingly, this study will address the development of the system for a wide range of power quality diagnosis over the present level, the system for supporting the determination such as the analysis on risk factors, failure mode and impact, the system for harmonic evaluation based on international standards(IEC 61000 Series) and the total power quality diagnosis network & system with the extension and openness as a local and national-scale broadband power quality diagnosis system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.426-437
• /
• 2007

off-design conditions, supersonic air inlets often encounter the problem of aerodynamic instability, called inlet buzz, which causes the significant degradation of the engine performance. An experimental and numerical study was conducted to investigate the phenomenon of supersonic inlet buzz on a generic, axisymmetric, external-compression inlet with a single-surface center-body. It is understood the mechanism of buzz onset as proving that the origin of buzz is the flow choking induced by separation at the intake throat. Also it is observed the intermittent and continuous buzz mode as area ratio varies and understood the transition process through this study. The buzz frequency become to be higher as decreasing the area ratio, but for each area ratio, the frequency of pressure oscillation is the same at all points of intake.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.320-323
• /
• 2005

This paper discusses heat problem of IC, which composes the electronic instruments, to guarantee reliability of electronic instruments. And also proposes the unified equivalent model for various electronic instrument products to guarantee reliability and life of its parts. Because electronic instruments are down sizing and operated with high frequency, the internal temperature of electronic instruments is rising steadily. The internal temperature of the electronic instruments gives a big effect to electronic instrument's reliability and life. The semiconductor parts are the representative heat generation parts because of its complicated function, high frequency and high density. Consequently, guaranteeing reliability and life of electronic semiconductor is the important start point in securing the reliability and life of the electronic instrument product. Unfortunately, there are many factors, which affect heat dissipation efficiency. The heat dissipation efficiency follows the environment where the electronic instrument products are used. Therefore it is very difficult to define reliability and life of the electronic manufactures. Electronic instrument products are composed of printed circuit board (PCB), integrated circuit (IC), resistance, and capacitor and so on. And there are superposed thermal resistances, because the parts are arrayed on the printed circuit board (PCB), Therefore the total thermal resistance is variable. Consequently it cannot have same thermal model for each electronic instrument products. In the next part, we propose the unified equivalent model for various electronic instruments. And using the proposed equivalent model proofs the method for analysis reliability of electronic parts.

• Structural Engineering and Mechanics
• /
• v.13 no.6
• /
• pp.615-638
• /
• 2002

This paper presents a method of seismic analysis for a cylindrical liquid storage structure considering the effects of the interior fluid and exterior soil medium in the frequency domain. The horizontal and rocking motions of the structure are included in this study. The fluid motion is expressed in terms of analytical velocity potential functions, which can be obtained by solving the boundary value problem including the deformed configuration of the structure as well as the sloshing behavior of the fluid. The effect of the fluid is included in the equation of motion as the impulsive added mass and the frequency-dependent convective added mass along the nodes on the wetted boundary of the structure. The structure and the near-field soil medium are represented using the axisymmetric finite elements, while the far-field soil is modeled using dynamic infinite elements. The present method can be applied to the structure embedded in ground as well as on ground, since it models both the soil medium and the structure directly. For the purpose of verification, earthquake response analyses are performed on several cases of liquid tanks on a rigid ground and on a homogeneous elastic half-space. Comparison of the present results with those by other methods shows good agreement. Finally, an application example of a reinforced concrete tank on a horizontally layered soil with a rigid bedrock is presented to demonstrate the importance of the soil-structure interaction effects in the seismic analysis for large liquid storage tanks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.82-87
• /
• 2009

Recently, a great variety of radio services are provided and interference problem between radio systems is being watched remarkably. Therefore, a study of interference between radio systems is needed. In this paper, compatibility between Ultra Wideband (UWB) and Terestrial Digital Multi-media Broadcasting (T-DMB) is analyzed and then distance between them is computed. UWB systems have a very broad frequency characteristic. A big advantage is to share frequency that is already allocated to other systems. T-DMB is a good point that while L-Band is already used for DAB, T_DMB is free of charge. AT-DMB (Advanced T-DMB) is being standardized recently. The result which is analyzed for the interference effects between UWB and T-DMB Systems is 10 [dB], which is value calculated by C/(N0+I), at 80 [m] and then the value is saturated at 150 [m].

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.955-969
• /
• 2019

Analyzing on-line consumer responses is directly related to the management performance of food companies. Therefore, this study collected and analyzed data from an on-line portal site created by consumers about food companies with issues and examined the relationships between the data and the management performance. Through this process, we identified consumers' awareness of these companies obtained from big data analysis and analyzed the relationship between the results and the sales and stock prices of the companies through a time-series graph and correlation analysis. The results of this study were as follows. First, the result of the text mining analysis suggests that consumers respond more sensitively to negative issues than to positive issues. Second, the emotional analysis showed that companies' ethics issues (Enterprise 3 and 4) have a higher level of emotional continuity than that of food safety issues. It can be interpreted that the problem of ethical management has great influence on consumers' purchasing behavior. Finally, In the case of all negative food issues, the number of word frequency and emotional scores showed opposite trends. As a result of the correlation analysis, there was a correlation between word frequency and stock price in the case of all negative food issues and also between emotional scores and stock price. Recently, studies using big data analytics have been conducted in various fields. Therefore, based on this research, it is expected that studies using big data analytics will be done in the agricultural field.