• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1086-1096
• /
• 2011

In this paper, we present the trisection band-pass filter with a transmission zero at 2.63 GHz, which has a center frequency of 2.44 GHz, relative bandwidth of 5 %, and return loss of 18 dB, based on a multi-port ElectroMagnetic simulation. The coupling matrix for the trisection filter is calculated and this filter is transformed into band-pass filter prototype through a lossless 2-port circuit transformation. The J-inverter values and slope parameters of each individual resonator are computed using an EM simulation Y-parameters of the filter with multi port. The dimensions of desired filter are determined by matching the computed J-inverter and susceptance slope parameters to those of the prototype band-pass filter. Undesired cross-couplings are found to occur which does not appear in the prototype trisection filter. To overcome the problem of undesired couplings, the filter was optimized to satisfy the same frequency response of prototype filter. The validity of the proposed design method was verified through the implementation of the designed and optimized filter.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.175-182
• /
• 2014

Tracking harmonic current quickly and precisely is one of the keys to designing active power filters (APF). In the past, the current state feedback decoupling PI control was an effective means for three-phase systems in the current control of constant voltage constant frequency inverters and high frequency PWM reversible rectifiers. This paper analyzes in detail the limitation of the conventional PI conditioner in the APF application field and presents a novel PI control method. Canceling the delay of one sampling period and the misadjustment for tracking the harmonic current is the key problem of this PI control. In this PI control, the predictive output current value is obtained by a state observer. The delay of one sampling period is remedied in this digital control system by the state observer. The predictive harmonic command current value is obtained by a repetitive predictor synchronously. The repetitive predictor can achieve better predictions of the harmonic current. By this means, the misadjustment of the conventional PI control for tracking the harmonic current is cancelled. The experiment results with a three-level NPC APF indicate that the steady-state accuracy and dynamic response of this method are satisfying when the proposed control scheme is implemented.

• Fashion & Textile Research Journal
• /
• v.14 no.5
• /
• pp.821-833
• /
• 2012

This study surveys preferred style and fit problems according to stature groups like short, medium, and tall to offer information to upgrade the clothing fit and satisfaction for each stature group. For this purpose, the questionnaire was accomplished, and the respondents were 18-59 year old women divided into 3 stature groups. The 6 questions were: (1) the preferred clothing style for 3 stature groups, (2) the conformity of stature designation on ready-made clothing, (3) frequency of restrictions on clothing design selection because of short or tall stature, (4) the important part to decide a good fit for a jacket, blouse, slacks, and skirt, (5) dissatisfaction with clothing fit and frequency of mending, and (6) mended part for a correct fit. They were analyzed according to 3 stature groups and the differences among 3 stature groups were found on them. For example, short women preferred short jackets; however, tall women preferred a long length. Short women experienced more restrictions on clothing design (or length) selection because a short stature. Hip girth was more important to decide a good fit for tall women versus short or medium women. Armhole and slacks width from crotch to knee were important parts to decide a good fit for short women. The study results should be applied to clothing design (or pattern making) in order to upgrade clothing fit and satisfaction for each stature group.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.186-189
• /
• 2019

NFSC 202 stipulates that if a loudspeaker or wiring on one floor of a building is shorted because of fire, it should not interfere with the fire notification on the other floors. To address this problem, this study proposes an ultrasonic transmitter/receiver consisting of an ADC, HPF, and LPF in an emergency broadcasting system that can operate regardless of the volume level of the amplifier output loudspeaker capacity. After transmitting the transmission frequency at -12 dB (110 kHz), it is received at -18 dB by transmitting -12 dB in case of short circuit depending on the frequency characteristics. Typically, depending on the loudspeaker capacity, it is received from -24 dB to -66 dB. In case of disconnection, it exceeds -66 dB and no data are received. It is also possible to check the track status during fire or general broadcasting. Thus, it was confirmed that the system is suitable for NFSC 202 regulations. Furthermore, as the current system is replaced, the inspection or test criteria should be amended or revised.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.211-217
• /
• 2012

Conventional GrabCut algorithm is semi-automatic algorithm that user must be set rectangle window surrounds the object. This paper studied automatic object detection to solve these problem by detecting salient region based on Human Visual System. Saliency map is computed using Lab color space which is based on color opposing theory of 'red-green' and 'blue-yellow'. Then Saliency Points are computed from the boundaries of Low-Frequency region that are extracted from Saliency Map. Finally, Rectangle windows are obtained from coordinate value of Saliency Points and these windows are used in GrabCut algorithm to extract objects. Through various experiments, the proposed algorithm computing rectangle windows of salient region and extracting objects has been proved.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.128-136
• /
• 2006

In this paper, design and implement 50W Doherty power amplifiers for 3GPP repeater and base station transceiver system. Efficiency improvement and high power property of ideal Doherty power amplifier is distinguishable; however bias control for implementation of Doherty(GDCHD) amplifier is difficult. To solve the problem, therefore, GDCHD(Gate and Drain Control Hybrid Doherty) power amplifier is embodied to drain bias adjustment circuit to Doherty power amplifier with gate bias adjustment circuit. Experiment result shows that $2.11{\sim}2.17\;GHz$, 3GPP operating frequency band, with 57.03 dB gain, PEP output is 50.30 dBm, W-CDMA average power is 47.01 dBm, and -40.45 dBc ACLR characteristic in 5MHz offset frequency band. Each of the parameter satisfied amplifier specification which we want to design. Especially, GDCHD power amplifier shows proper efficiency performance improvement in uniformity ACLR than Doherty power amplifier.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.9-20
• /
• 2000

In this paper we compare two frequency domain digital watermarking methods for digital Images, namely DCT(Discrete Cosine Transform) based and DFT(Discrete Fourier Transform) based methods. Unlike DCT coefficients, which always have real values, DFT coefficients normally have complex values Therefore, the DFT coefficients have amplitude and phase components Among them, the phase components are known to carry more Important information for the Images. So, we insert the watermark to the phase of the DFT coefficients only This DFT watermarking method is compared with the conventional DCT based watermarking method for the object-based watermarking problem. Experimental results show that the DFT-phase based method IS more robust to general Image processing attacks including resize, lossy compression(JPEG), blurring and median filtering. On the other hand, the DCT based method is more robust to the malicious attack which inserts different watermarks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.10-18
• /
• 2010

The polar transmitter is applied to the narrowband communication systems such as GSM (Global System for Mobile Communications), EDGE (Enhanced Data Rates for GSM Evolution), and GPRS (General Packet Radio Service). To apply polar transmitter for the wideband communication like OFDM (Orthogonal Frequency Division Multiplexing) where the high PAPR (Peak-to-Average Power Ratio) problem occurs, this paper proposes a windowed-sinc function based PAPR reduction scheme. The proposed algorithm mitigates the effect of excessive suppression due to successive peaks or relatively high peaks of the signal. The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm achieves significant improvement in terms of BER and PAPR reduction performance with similar spectrum performance to the conventional peak windowing scheme.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.248-254
• /
• 2014

Among acoustic signal analysis tasks, acoustic context awareness is one of the most formidable tasks in terms of complexity since it requires sophisticated understanding of individual acoustic events. In conventional context awareness methods, individual acoustic event detection or recognition is employed to generate a relevant decision on the impending context. However this approach may produce poorly performing decision results in practical situations due to the possibility of events occurring simultaneously or the acoustically similar events that are difficult to distinguish with each other. Particularly, the babble noise acoustic event occurring at a bus or subway environment may create confusion to context awareness task since babbling is similar in any environment. Therefore in this paper, a frequency-cepstral feature vector is proposed to mitigate the confusion problem during the situation awareness task of binary decisions: bus or metro. By employing the Support Vector Machine (SVM) as the classifier, the proposed feature vector scheme is shown to produce better performance than the conventional scheme.

• Korean Journal of Microbiology
• /
• v.34 no.1_2
• /
• pp.58-63
• /
• 1998

Fragment assembly problem is to reconstruct DNA sequence contigs from a collection of fragment sequences. We have developed an efficient X-window program, XFAP, for assembling DNA fragments. In the XFAP, the dimer frequency comparison method is used to quickly eliminate pairs of fragments that can not overlap. This method takes advantage of the difference of dimer frequencies within the minimum acceptable overlap length in each fragment pair. Hirschberg algorithm is applied to compute the maximal-scoring overlapping alignment in linear space. The perfomance of XFAP was tested on a set of DNA fragment sequences extracted from long DNA sequences of GenBank by a fragmentation program and showed a great improvement in execution time, especially as the number of fragments increases.