• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.4
• /
• pp.464-471
• /
• 2002

Porosity formation in partial penetration welds by high power lasers is a serious problem in industry. There are two main causes that induce porosity formation. One form of porosity is due to gases (e.g. hydrogen, oxygen) dissolving into the weld pool because of the high temperature and then the rapid solidification traps gases as a bubble in the weld metal. The second problem is voids formed by the keyhole collapsing due to unstable keyhole fluid dynamics. The voids that form at the bottom of the keyhole are relatively large and irregular in shape compared to the gas bubbles; this void formation is the primary concern in this paper. The reduction of voids formed by keyhole collapse is achieved by improving the stability of keyhole. Two methods to improve keyhole stability are discussed in this paper: pulse modulation and beam incident angle. Pulse modulation of the laser beam was performed between 100 Hz and 500 Hz to find out the optimum frequency for the keyhole dynamics. The incident beam angle changed the impact angle of the laser beam to the work surface in a range of 0 to 25 degrees. Glycerin in a semi-solidified state is used as a medium for performing the welding because its transparency allows of visualization of the keyhole.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.3 s.25
• /
• pp.101-109
• /
• 1987

This study was designed to measure the amount of formaldehyde in the disposable diapers of seven different products. It was aimed to investigate the actual situation of the diaper consumption and to relate it to the amount of formaldehyde measured. The degree of recognizability on the harmfulness of formaldehyde was also studied. The amount of formaldehyde was measured by means of the Acetyl Acetone method. The a ual situation of consumption and the recognizability of the formaldehyde were investigated by questionnaire. In the survey, the subjects had their babies aged from 0$\~$3 years and lived in Seoul. The statistical methods used were simple frequency and chi-square. The results obtained from this study were as follows; 1) Among seven (7) different disposable diapers, two were found to have less amount of formaldehyde than the Japanese regulation. 2) From the survey on the actual situation of consumption most respondents ($53.7\%$) experienced the dermatological problem after using the disposable diapers. Actually for the diapers which had a lot of formaldehyde, the respondents experienced the problems more severely. 3) The recognizability of formaldehyde was very low. The recognizability on the harnfulness of formaldehyde was lower, which represented the consumers had least or no knowledge about the formaldehyde release problem.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.604-605
• /
• 2008

Modal participation factor (MPF) is a widely used in a mode-coupling squeal noise problem for finding the most sensitive component over a complex brake system in a vehicle using eigenvectors of sub-components. This methodology requires the problematic total response of system by the unstable squeal noise at a specific frequency as well as eigenvectors of each component belonging to brake system. In this paper, a unit-force response analysis is performed for intact total system to obtain eigenvectors of each component and then such data is directly used for the contribution analysis of a squeal noise problem. Since the eigenvectors of each component induced from virtual unit-excitation is most reliable owing to the intact boundary condition, it can be expected that the corresponding contribution analysis with MPF also provides a trustworthy result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1819-1823
• /
• 2005

Incorrect information on public sites can cause serious problem. One of relevant countermeasures against this problem is to detect of buried underground utilities in real time. Although there have been several method to detect of buried underground utilities, such as investigating of gravity and elastic wave and electric field, they have not been so efficient tools. Because it is too expensive and difficult to use. In this paper, magnetic sensors which could provide an easier and more efficient method are used to detect of buried underground utilities. Also fluxgate method of self detection are used. Input signal is used $1\~10kHz$ frequency. Filtering and signal processing of output signal are used labview software. After experiment, detection system of buried underground utilities which used magnetic shows possibility of precise detecting of laying object based on theorectical analysis for electromagnetic field.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.31-40
• /
• 2005

In this paper, we propose XMDR(XML Metadata Registry) to guarantee the interoperability of data in distributed database, and describe a data synchronizing agent system using it. The proposal of XMDR is to solve the data heterogeneity problem in the sharing and exchanging data. Data heterogeneity problem is generated by different definition or mismatching expression of the same information. Therefore, we define XMDR with XML document by analyzing data elements based on MDR specification. The proposed synchronizing agent system using XMDR not only solves data heterogeneity for data interoperability in synchronizing data but also provides more efficient the agent system by offering errors of low frequency in the number of systems and requests of synchronizing data.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.891-903
• /
• 2006

The purpose of this study was to identify relationships among peer pressure, parental supervision, alcohol expectancy and adolescent drinking behaviors between year 2001 and 2006. Three hundred high school students were given questionnaires each year on their drinking behavior. Findings of this study were; first, a adolescent drinking and the amount drinking has increased during the years. adolescent drinker ratio as adolescent drinkers were 91.3% in 2006 compared to 75.9% in 2001. The average drinking amounts were 40.82 units in 2006 and 24.9 units in 2001. Second, differences were found in adolescent drinking behaviors such as the amount of alcohol consumption, drinking frequency, & problem drinker ratio by gender, and grade. Male students over female students. Third, peer pressure, parental supervision, alcohol expectancy showed significant impacts on adolescent drinking behaviors through 2001 and 2006. Students who lack parental supervision with much higher drinking-related peer pressure along with a higher level of positive alcohol expectancy were observed to be heavy drinkers and problem drinkers. Especially, students who showed belief in alcohol's tension-relieving function and sociability function tended to over-drink, drink more frequently and as a result, experienced more drinking problems. Intervention strategies were discussed.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1621-1628
• /
• 2016

Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.527-539
• /
• 2013

Purpose: Methods for increasing health-care service quality are considered for a women-centered hospital located on a local city. A walk-through audit is applied to uncover areas for improvement. Methods: A survey questionnaire with 25 questions is constructed based on a service blueprint for a walk-through audit, and a survey is conducted both to patients and service providers to assess a health-care service quality. Frequency analysis, statistical tests and customer-provider analysis are used to analyze surveyed data. Results: According to customer-provider analysis, 6 attributes belong to 'problem unawareness' zone in which they are rated high by service providers but low by patients, and another 6 attributes belong to 'problem awareness' zone in which they are rated low by both groups. These attributes are considered to be improved with priority. Conclusion: Both patient group and service provider group have lots of different perceptions on most attributes that are examined, and the hospital to be studied is, in general, competitive in technical quality and less competitive in functional quality.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.119-135
• /
• 1995

We consider problems of tool loading and scheduling in a flexible manufacturing system (FMS) in which tool transportation constitutes the major portion of material flows. In this type of FMSs, parts are initially assigned to machines and released to the machines according to input sequencing rules. Operations for the parts released to the machines are performed by tools initially loaded onto the machines or provided by an automatic tool transport robot when needed. For an efficient operation of such systems, therefore, we may have to consider loading and scheduling problems for tools in addition to those for parts. In this paper, we consider three problems, part loading, tool loading, and tool scheduling problems with the overall objective of minimizing the makespan. The part loading problem is solved by a method similar to that for the bin packing problem and then a heuristic based on the frequency of tool usage is applied for tool loading. Also suggested are part input sequencing and tool scheduling rules. To show the effectiveness of the overall algorithm suggested here, we compare it with an existing algorithm through a series of computational tests on randomly generated test problems.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.621-625
• /
• 2007

Oscillating wave amplitude in a bottom-mounted owe chamber designed for wave energy converter is investigated by applying characteristic wave conditions in Korean coastal water. The effects of shape parameters of OWC chamber in a view of wave energy absorbing capability are analyzed. Both experimental and numerical approaches are adopted and their results are compared to optimize the shape parameters which can result in a maximum power production under given wave distribution. The experiment was carried out in a wave flume under 2-D assumption of OWC chamber. In numerical scheme, the potential problem inside the chamber is solved by use of the Green integral equation associated with the Rankine Green function, while outer problem with the Kelvin Green function taking account of fluctuating air pressure in the chamber. Air duct diameter, chamber width, and submerged depths of front skirt and back wall of chamber changes the magnitude and peak frequency of wave absorption significantly.