• 한국음향학회지
• /
• 제39권6호
• /
• pp.606-614
• /
• 2020

본 논문에서는 수중 주변소음 생성에 주요한 영향을 끼치는 선박 통행량 및 해양기상정보와 수중 주변소음간 영향성을 분석한다. 주변소음은 수중 소나 시스템의 탐지 성능에 큰 영향을 끼치는 중요한 환경 요소이다. 최근에 많은 연구가 진행 중인 인공지능 기술을 이용한 탐지성능 예측 등 자동화 시스템 구현을 위하여 이와 관련된 주요 데이터 확보 및 분석이 필요하다. 주변소음의 주요 발생원은 다양한 원인이 있는데, 연근해에서 운용되는 소나 시스템의 경우 탐지 성능에 있어서 선박 통행에 의한 소음 및 해양 기상에 의해 발생하는 소음의 영향을 크게 받는다. 따라서 본 논문에서는 대한민국 동해 연안에서 획득한 주변소음 측정 결과와 인근 선박 통행량 및 해양기상정보 공공데이터를 이용하여 각 데이터의 영향성을 분석하였다. 분석 결과 수중 주변 소음은 선박의 통행량의 변화에 따라 높은 연관성을 보였으며, 풍속과 파고, 강우 등 해양환경 요소에 있어서도 특정 주파수 대역에 영향성이 있음을 관찰하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.171.2-171.2
• /
• 2016

The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.93-93
• /
• 2016

Large scale integrated circuits (LSIs) has been improved by the shrinkage of the circuit dimensions. The smaller chip sizes and increase in circuit density require the miniaturization of the line-width and space between metal interconnections. Therefore, an extreme precise control of the critical dimension and pattern profile is necessary to fabricate next generation nano-electronics devices. The pattern profile control of plasma etching with an accuracy of sub-nanometer must be achieved. To realize the etching process which achieves the problem, understanding of the etching mechanism and precise control of the process based on the real-time monitoring of internal plasma parameters such as etching species density, surface temperature of substrate, etc. are very important. For instance, it is known that the etched profiles of organic low dielectric (low-k) films are sensitive to the substrate temperature and density ratio of H and N atoms in the H2/N2 plasma [1]. In this study, we introduced a feedback control of actual substrate temperature and radical density ratio monitored in real time. And then the dependence of etch rates and profiles of organic films have been evaluated based on the substrate temperatures. In this study, organic low-k films were etched by a dual frequency capacitively coupled plasma employing the mixture of H2/N2 gases. A 100-MHz power was supplied to an upper electrode for plasma generation. The Si substrate was electrostatically chucked to a lower electrode biased by supplying a 2-MHz power. To investigate the effects of H and N radical on the etching profile of organic low-k films, absolute H and N atom densities were measured by vacuum ultraviolet absorption spectroscopy [2]. Moreover, using the optical fiber-type low-coherence interferometer [3], substrate temperature has been measured in real time during etching process. From the measurement results, the temperature raised rapidly just after plasma ignition and was gradually saturated. The temporal change of substrate temperature is a crucial issue to control of surface reactions of reactive species. Therefore, by the intervals of on-off of the plasma discharge, the substrate temperature was maintained within ${\pm}1.5^{\circ}C$ from the set value. As a result, the temperatures were kept within $3^{\circ}C$ during the etching process. Then, we etched organic films with line-and-space pattern using this system. The cross-sections of the organic films etched for 50 s with the substrate temperatures at $20^{\circ}C$ and $100^{\circ}C$ were observed by SEM. From the results, they were different in the sidewall profile. It suggests that the reactions on the sidewalls changed according to the substrate temperature. The precise substrate temperature control method with real-time temperature monitoring and intermittent plasma generation was suggested to contribute on realization of fine pattern etching.

• 감성과학
• /
• 제20권3호
• /
• pp.13-22
• /
• 2017

감성은 의사 결정, 지각 등에 직접적으로 영향을 미치며 인간의 삶에서 중요한 역할을 한다. 본 논문에서는 고각성 부정 감성의 편리하고 정확한 인식에 있어서, 생체신호를 이용한 분석 알고리즘을 설계하고자 한다. 이를 위해 본 연구에서는 보통 / 공포 감성 유발 영상을 이용하여 두 감성을 유도한 후, 생체신호 중 간단한 피부전도도 신호를 측정하였다. 측정된 피부전도도에 대해 Tonic 성분과 Phasic 성분으로 분해하고 감성 자극과 관련된 Phasic 성분을 더 상세하게 SCVSR, SCSR로 분해하여 각 성분의 주요한 특징들을 추출함으로써, 정확한 분석을 하기 위해 기존의 사용된 방법이 아닌 우수한 시간-주파수 지역화 특성을 가진 이산 웨이브렛 변환을 사용하였다. 추출된 특징들은 Phasic 성분의 최댓값, Phasic 성분의 진폭, SCVSR의 영교차율, SCSR의 영교차율이다. 분석 결과, 4가지 특징들 모두 고각성 부정 감성의 경우가 저각성 보통 감성의 경우보다 더 높은 값을 나타내고, 기존의 분석 방법보다 통계적으로 두 감정 사이의 더 유의미한 차이를 확인할 수 있었다. 이에 따라 본 연구의 결과는 피부전도도가 고각성 부정 감성 측정에 대해 유용한 지표라는 것을 확인하였으며, 향후 피부전도도를 이용한 실시간 부정 감성 평가 시스템 개발에 기여할 수 있을 것을 나타낸다.

• 치위생과학회지
• /
• 제15권5호
• /
• pp.603-611
• /
• 2015

치과 진료실에서 발생하는 소음원에 대한 소음의 특성을 파악하고 그에 따른 피해 가능성을 알아보기 위해 휴대용 소음기로 측정하여 검토한 결과 다음과 같은 결론을 얻었다. 치과용 의료기기 소음측정 결과 단독측정에서는 고속 핸드피스가 가장 높았으며, 초음파 스케일러, 저속 핸드피스 순서로 낮게 나타났다. 단독측정 시 평균 소음도는 58~66 dB(A)를 보였으며, 복합측정 시 평균 소음도는 62~71 dB(A)를 보였다. 진료실 형태에 따른 개방형과 개실형의 소음측정 결과 개방형 진료실에서의 소음이 평균 1.9~3.2 dB(A) 더 높게 나타났다. 비진료 시와 진료 시의 소음측정 결과 초음파 스케일러와 고속 핸드피스의 소음에서 통계적으로 유의한 차이가 있었다. 초음파 스케일러와 high volume aspirator을 함께 사용하였을 때 가장 높은 소음도를 보였으며, 진료 시 75.5 dB(A)로 비진료 시와 3.5 dB(A)의 소음차를 보이며 더 높게 나타났다. NR 곡선으로 진료 시 가장 높은 소음도를 보인 치석제거를 평가해본 결과 치석제거 시 NR-73~78로 ISO 소음기준중 일반작업장의 소음기준을 초과하는 수준이며 8 kHz의 고주파에서 피크치를 나타냈다. 진료 시 거리에 따른 소음을 측정한 결과 작업자와 가까운 30 cm 거리에서의 소음이 100 cm 거리에서의 소음보다 높은 패턴을 보였으며, 30 cm 거리에서 대상 치과 의료기기에서 발생하는 소음레벨은 79.8~80.6 dB(A)으로 장시간 폭로 시 청력 손실을 초래할 수 있는 수준이다. 두 거리의 차이로 5 dB(A) 이상의 소음 감쇠 효과를 확인하였다. 이상의 결과를 종합하여 볼 때 치과 치료 시 진료실 소음은 치과 의료기관 종사자에게 정신적, 육체적 피해를 줄 수 있는 정도이며, 본 연구결과를 통하여 얻어진 자료들이 기초가 되어 더 많은 치과 진료 시의 소음에 대한 특성이 파악된다면 직장환경의 질을 높이기 위한 체계적인 소음 감소 대책 수립이 가능할 것으로 생각된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.156-156
• /
• 2017

Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.188.2-188.2
• /
• 2015

The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.

• 대한간호학회지
• /
• 제30권4호
• /
• pp.982-994
• /
• 2000

This study was designed to develop a program for unemployed matriarchs and show if the program affected their view on the meaning in life. The subjects were women registered in an occupational training program for unemployed matriarchs, which is being practiced in the 'Working Women Center' located in Busan. The researchers selected 44 persons from the group who agreed to our program. This study was done from the 10th of March, 1999 to the 9th of October. The researchers used the measurement tools, The Purpose in Life, Self-esteem, Hope and Meaning in Life which was composed of 63 items developed by them. Their Cronbach's alpha were .88, .79, .76 and .95. The researchers analyzed the data with frequency, percentage, Mean, S.D, Wilcoxon signed ranks test which were deduced from SPSS 10.0 WIN program. The results of this study were as follows: 1) The program is composed of 'becoming intimate', 'open-minded', 'exploration on self', 'relax of repressed emotion', 'self- acceptance', 'establishing the life-goal', 'enrichment of human relationship' and closing. It took 20 hours for this program to come into practice. 2) According to the analysis of the general traits of all subjects, average age was 39.36. High school graduates were 86%, college graduates were 14% and divorce were 57%, bereavement were 18%, and the rest were 25%. 3) The result of 1st progam showed self-esteem during the program was high. 4) The result of 2nd progam showed self-esteem during the program was high. 5) The result of 3rd progam showed the sum scores of meaning in life, creative meaning, and attitudinal meaning during the program was high. 6) The result of 4th progam showed the sum scores of meaning in life and creative meaning during the program was high. On the viewpoint of above results, we convinced that 'a program for unemployed matriarch is effective to establish a stronger meaning in life. Therefore, it is demanded that support for unemployed matriarchs should not only be economic help such as technical training and help of living expenses, but also psychological, professional and systematic support.

• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.

• 한국전자파학회논문지
• /
• 제19권11호
• /
• pp.1193-1203
• /
• 2008

능동 안테나는 수동 안테나에 비하여 소형으로 광대역 특성 및 높은 이득을 얻을 수 있으나, 잡음 및 불요파 신호가 발생되는 단점이 있다. 또한, 수신 시스템의 초단부에 위치하므로, 고감도 수신 시스템을 위하여 불요파 신호 특성이 좋아야 한다. 본 연구에서는 출력단 P1dB가 3 dBm 이상이고 $100{\sim}500\;MHz$에서 동작하며, 실환경에서 높은 선형 특성을 갖는 능동 안테나를 개발하였다. 이를 위하여 공통 드레인 FET와 2단 BJT의 능동 회로를 구성하였고, ADS를 이용하여 능동 안테나를 설계하였다. 제작된 능동 안테나의 평균 이득, 평균 잡음 지수, OIP3, VSWR 및 P1dB는 각각 9.7 dBi, 10 dB, 14 dBm, 1.7:1 및 3 dBm으로 설계치와 잘 일치하였다. 도심 인근지역에서 측정된 수신 스펙트럼 특성은 설계된 능동 안테나가 CS 구조를 갖는 참고문헌 [9]의 안테나보다 불요파 신호 특성이 약 $10{\sim}30\;dB$가 개선되어 방송 및 상용 신호와 혼재된 상태에서 신호 세기가 약한 미지의 신호를 검출하기 위한 고감도 수신 시스템에 적용할 수 있음을 보였다.