• Coupled systems mechanics
• /
• v.4 no.4
• /
• pp.279-295
• /
• 2015

The article presents a theoretical-experimental approach developed for modeling the coefficient of sliding friction in the dynamic system tool-workpiece in slide diamond burnishing of low-alloy unhardened steels. The experimental setup, implemented on conventional lathe, includes a specially designed device, with a straight cantilever beam as body. The beam is simultaneously loaded by bending (from transverse slide friction force) and compression (from longitudinal burnishing force), which is a reason for geometrical nonlinearity. A method, based on the idea of separation of the variables (time and metric) before establishing the differential equation of motion, has been applied for dynamic modeling of the beam elastic curve. Between the longitudinal (burnishing force) and transverse (slide friction force) forces exists a correlation defined by Coulomb's law of sliding friction. On this basis, an analytical relationship between the beam deflection and the sought friction coefficient has been obtained. In order to measure the deflection of the beam, strain gauges connected in a "full bridge" type of circuit are used. A flexible adhesive is selected, which provides an opportunity for dynamic measurements through the constructed measuring system. The signal is proportional to the beam deflection and is fed to the analog input of USB DAQ board, from where the signal enters in a purposely created virtual instrument which is developed by means of Labview. The basic characteristic of the virtual instrument is the ability to record and visualize in a real time the measured deflection. The signal sampling frequency is chosen in accordance with Nyquist-Shannon sampling theorem. In order to obtain a regression model of the friction coefficient with the participation of the diamond burnishing process parameters, an experimental design with 55 experimental points is synthesized. A regression analysis and analysis of variance have been carried out. The influence of the factors on the friction coefficient is established using sections of the hyper-surface of the friction coefficient model with the hyper-planes.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.75-89
• /
• 1993

The present paper describes an application of UA(Uncertainty Analysis) to seakeeping model test, basically according to the Performance Test Code of ASME(American Society of Mechanical Engineers), in which all the possible error sources involved in the preparation of test, calibration of instruments, data acquisition and analysis are quantified, and summed up with error propagation coefficients to the final uncertainties. The differences between the static test such as resistance and propulsion test and the dynamic test like seakeeping test are clearly identified during all the procedures of UA and asymmetric bias errors are considered. The DRE(data reduction equation) subject to present UA are the heave and pitch response amplitude operator and nondimensionalized absolute frequency. The usefulness of UA in seakeeping test were confirmed not only for quantifying errors and improving measurement accuracy but also for the validation of various seakeeping analysis tools.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.175-182
• /
• 2013

Rolling noise is an important source of noise from railways; it is caused by wheel and rail vibrations induced by acoustic roughness at the wheel/rail contact. To reduce rolling noise, it is necessary to have a reliable prediction model that can be used to investigate the effects of various parameters related to the rolling noise. This paper deals with modeling rolling noise from wheel and rail vibrations. In this study, the track is modeled as a discretely supported beam by regarding concrete slab tracks, and the wheel vibration is simulated by using the finite element method. The vertical and lateral wheel/rail contact forces are modeled using the linearized Hertzian contact theory, and then the vibration responses of the wheel and rail are calculated to predict the radiated noise. To validate the proposed model, a field measurement was carried out for a test vehicle. It was found that the predicted result agrees well with the measured one, showing similar behavior in the frequency range between 200 and 4000 Hz where the rolling noise is prominent.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.4
• /
• pp.372-380
• /
• 2021

In this study, data from the 7th (2016~2018) and 8th (2019) Korea National Health and Nutrition Examination Surveys were used, which included 5,325 subjects. Health behavior, dietary and nutrient intake status, physical measurement and biochemical characteristics, and risk factors for elderly related chronic diseases were classified and analyzed according to the changing composition of single households and other households in the current society. As a result, the ratio of current smokers and drinkers in young adult single households, walking less than 30 minutes per day, subjective health status was poor, breakfast rate less than three times per week, eating out frequency more than once a day, lipid intake ratio to total calories, saturation fatty acid intake were significantly higher. In addition, waist circumference, and diastolic blood pressure were significantly higher. However, dietary fiber intake level was significantly lower. The results for hypertension, which is the representative chronic disease that causes old age-related chronic diseases, were significantly higher in single households (ORs=1.400 (95% CI: 1.095, 1.791), p=0.007). Although young adults may not have showed particularly serious health problems yet, education is believed as important to recognize and prevent age-related disease risk factors.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.179-188
• /
• 2019

Domestic apparel products labeled as 'Made in Korea' in the Chinese market are recognized as a high quality products due to the influence of the Korean Wave (Intergen Consulting Group, 2007). This study analyzes the patterns and order arrangement types of a fashion brand company commissioned to produce apparel in Seoul, Korea in order to rebuild a network of small sewing factories scattered in Korea, reorganize operations, and to find the possibility of regenerating the Korean sewing industry by establishing contact points with domestic sewing factories. We surveyed 100 apparel brand companies in Seoul listed in the 2014/2015 Korea Fashion Brand Annual (Apparel News, 2014) and conducted a questionnaire survey on the company's general management status, type of fabric materials dealt with, and major contact points and methods of production handling. The frequency analysis indicated that the main production material with cloth type was woven fabric with ladies' clothes. The Planning MD team has the highest rate of ordering production with delivery method to the production factory after purchasing fabric and trims. Most respondents answered that they would select a production factory based on recommendations from acquaintances. This was due to a lack of no objective indicator provided by the sewing factory at present and the absence of objectively proceeded communication with brand companies. In this study, we analyze various conditions and measurements for production arrangements from a fashion brand company to revitalize sewing factories in Korea.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.29-35
• /
• 2018

In this paper, we proposed a high sensitivity sensor that can detect the concentration change of Nacl aqueous solutions by using a slot coupling capacitor resonator in sub-microwave band. The resonator applied to the sensor consists of a parallel plate capacitor connected to an inductive slot utilizing the ground plane of the microstrip line. Based on the measurement data of the dielectric characteristics according to the concentration change, the resonance frequency was determined in the UHF band where the concentration change is evident and the Nacl aqueous solution is inserted into the capacitor. Based on the simulation, the proposed resonator was designed and fabricated. The concentration level was varied from 0 to 400 mg/dl as 100 mg/dl step, and the transmission scattering coefficient ($S_{21}$) was successfully measured. Experimental results show that it is applicable to the concentration detection sensor in Nacl aqueous solution by obtaining minimum 1.8 dB($S_{21}$) at each step.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.59-65
• /
• 2019

The EMI shielding effectiveness of the shielding layer thickness was analyzed when the metal shielding layer was placed in the near field of the magnetic probe and the noise source. Microstrip lines were used as noise source, and graphite and ferrite were selected as metal shielding materials. The magnetic probe uses the electromagnetic radiation measurement method using the magnetic probe by applying the IEC 61967-6 method. The transmission coefficient between the microstrip line and the magnetic probe was analyzed. The distance between the two was 1 mm for a single shielding layer and 5 mm for a multiple shielding layer. The thickness of the shielding layer was changed to 5 um, 10 um, 30 um, and 50 um. When the frequency was changed from 150 kHz to 1 GHz, a maximum shielding effectiveness (SE) of 44.9 dB was obtained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.127-132
• /
• 2018

In this paper, a high conversion gain cascode mixer was designed in W-band and verified by the fabrication and measurements. In the high frequency band such as a W-band, the conversion loss of a mixer is increased because of the poor performance of transistors. This high conversion loss of the mixer requires additional circuits which can give an extra gain such as an RF buffer amplifier, and this can affects the linearity and stability of the overall systems. Therefore, it is necessary to maximize the conversion gain of the mixer. To maximize the conversion gain of the mixer, biases of the transistor were optimized, and output load impedance was optimized by the load-pull simulations. The designed mixer was fabricated in $0.1-{\mu}m$ GaAs pHEMT technology and verified by the measurements. The measurement results shows a maximum conversion gain of -4.7 dB at W-band and an input 1-dB compression point of 2.5 dBm.

• Journal of People, Plants, and Environment
• /
• v.21 no.6
• /
• pp.461-471
• /
• 2018

The role of urban agriculture should not be limited as a small-scale crop cultivation activity as it was, but it has to be considered as an entire process of a agriculture activity for the restoration of the city community. This study is based on the assumption that there has been a significant change in urban lifestyle and urban farming preference, considering the overall improvement in standard of living after implementation of five day work week system. It was conducted for urban citizens who were interested in actual urban agriculture for ages 19 and over who visited the Korea Urban Agriculture Exhibition in 2018. Only 115 valid samples were used for the empirical analysis. To analyze the demographic characteristics and effects of urban agriculture, frequency analysis and descriptive statistics were conducted. In order to analyze the reliability and validity of the measurement variables of the effect, the variables that deteriorate the validity were removed and 15 variables of the urban agricultural effect were selected. According to the result of factor analysis, three factors were extracted as follows: socially sustainable effect, negative effect and economically sustainable effect. In order to examine the effects of urban agriculture depending on income level, the one-way ANOVA, which is a statistical technique for verifying differences in the sample means, was performed. The psychological stability of people, the recovery of humanity through communion with nature, and the vitalization of agriculture linked with local agriculture had significant correlations with income level. The negative effect showed no significant correlation with income level. The improvement of the local environment was found to have an impact in relation with income level. We expect that there will be more studies on policies for the new types and models of urban agriculture in order to make it easier for urban citizens to approach it.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.413-418
• /
• 2018

The purpose of this study is to investigate the cause of rail corrugation and the track force for concrete track (STEDEF) in the urban transit. From the field measurements, the dynamic wheel load, vertical displacement of sleeper and rail bending stress were measured and it was evaluated by regarding to the rail corrugation. As a result of the study, the causes of rail corrugation was experimentally proved by frequency analysis using measured dynamic wheel load data. The influence of corrugation on dynamic wheel load, rail bending stress and sleeper displacement was evaluated that the periodic irregularities of rail corrugation on the rail surface amplified the dynamic track force such as the dynamic wheel load, and thus the rail bending stress and the vertical displacement of sleeper could be increased by a maximum of 1.7 times.