• 한국해양공학회지
• /
• 제34권2호
• /
• pp.120-127
• /
• 2020

Evaluation of fatigue strength considering the springing effect of very large container ships is crucial in the design stage. In this study, we established a fatigue strength evaluation method considering a linear springing component in the frequency domain. Based on a three-dimensional global model, a fluid-structure interaction analysis was performed and the modal superposition method was applied to determine the hot spot stress at the hatch corner of very large container ships. Fatigue damage was directly estimated using the stress transfer function with a linear springing response. Furthermore, we proposed a new methodology to apply the springing effect to fatigue damage using hull girder loads. Subsequently, we estimated the fatigue damage contribution due to linear springing components along the ship length. Finally, we discussed the practical application of the proposed methods.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1559-1563
• /
• 2014

Recently, the prevention of crime using CCTV draws special in accordance with the higher crime incidence rate. Therefore security systems like a CCTV with audio capability are developing for giving an instant alarm. This paper proposes a scream detecting engine from various ambient noises in real environment for surveillance systems. The proposed engine detects scream signals among the various ambient noises using the features extracted in time/frequency domain. The experimental result shows the performance of our engine is very promising in comparison with the traditional engines using the model based features like LPC, LPCC and MFCC. The proposed method has a low computational complexity by using FFT and cross correlation coefficients instead of extracting complex features like LPC, LPCC and MFCC. Therefore the proposed engine can be efficient for audio-based surveillance systems with low SNRs in real field.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.84-92
• /
• 2005

This work presents the feasibility of shunt damping far vibration suppression of the rotating HDD disk-spindle system using piezoelectric bimorph. A target vibration mode which significantly restricts the recording density increment of the drive is determined through modal analysis and a piezoelectric bimorph is designed to suppress unwanted vibration. After deriving the two-dimensional generalized electromechanical coupling coefficient of the shunted drive, the shunt damping of the system is predicted by simulating the displacement transmissibility using the coefficient. In addition, optimal design process using sensitivity analysis is undertaken in order to improve the shunt damping of the system. The effectiveness of the proposed methodology is verified through experimental implementation by observing the vibration characteristics of the rotating disk-spindle system in frequency domain.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.380-380
• /
• 2000

We have developed a design/analysis tool for use with Mat lab whick is named as "Parametric Robust Control and Identification(PROCI)". The tool is composed of three parts: Part i) consists of the identification of the continuous time transfer function by using either time domain input-output data or frequency response data, which might be experimentally obtained. Part ii) is the CDM synthesis of classical controller such as PID, Lead/Lag compensators. In part iii), the analysis of robustness of overall system can be dealt with. This tool allows us to analyze completely most of robustness issues with respect to the interval uncertaintyncertainty

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.229-229
• /
• 2012

It is significant issue to control the unwanted transverse electric (TE) modes in the vacuum chamber for preventing the position reading noise from the beam position monitor (BPM) of storage ring. We introduce shunt structure to control the frequency distribution of TE resonance modes excited in the vacuum chambers of the Pohang Light Source II (PLS-II). The design of shunt structure is performed using the full three dimensional finite-difference time-domain (FDTD) simulation. It is verified that the sympton of the BPM noise is not oberved up to the beam current of 190 mA in the commmissioning of PLS-II.

• 인터넷정보학회논문지
• /
• 제7권1호
• /
• pp.173-178
• /
• 2006

본 논문에서는 OFDM-CDMA기반의 광대역 무선 접속시스템에서 다중 안테나를 적용한다. 이로서 시간영역에서 윈도우 기반의 채널추정 기법과 OFDM기반의 공간영역에서 다중 안테나 전송시스템에서 채널추정의 불완전성을 극복하기 위한 다채널 분리용 프리앰블을 적용함으로서 광대역 무선 접속시스템에서 사용자수를 최대로 확대하고 사용자 용량을 증대하는 광대역 무선접속시스템의 성능을 분석하였다.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.156-161
• /
• 2005

The gray line-profile method is introduced to find fabric density. Some patterned fabrics like stripe design as well as solid fabrics of basic weave structures are used to verify the efficiency and accuracy of the method. The approach is compared with Fourier transform method. Although the gray line-profile method is concise, it shows good results in both solid and patterned fabrics. In addition, it does not require a pre-processing or filtering technique in space or frequency domain to enhance the image suitable for the analysis. However, the approach is slightly influenced by the filter size for finding the local minimums of profile graph.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권4호
• /
• pp.246-251
• /
• 2003

This paper proposes a new methodology for the estimation of impedance characteristics, which is one of the important issue in the power distribution network design of printed circuit boards. The modeling process of the proposed method divides the power distribution network into uniform segment, and each segment is modeled by distributed RLC transmission lines. Then, for the efficient computation of impedance characteristics in frequency domain. the proposed method uses a model-order reduction method.

• 한국유체기계학회 논문집
• /
• 제2권1호
• /
• pp.43-49
• /
• 1999

Flow field and near-field noise of a centrifugal fan has been studied with an efficient compressible method and STAR-CD. The flow field of the centrifugal fan is assumed to be two-dimensional. Most of the compressible studies have been done by inviscid solver because viscous simulation shows little difference. The near field noise is estimated in terms of sound pressure level in frequency domain transformed from the computed pressure fluctuations using FFT. The simulation has been done on various design elements such as impeller blade shapes, the number of blades and cut-off clearance. The comparison shows that the number of blades has a significant effect on near-field noise without losing aerodynamic performance.

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.17-26
• /
• 2006

The flutter characteristics of all movable tail wing with honeycomb sandwich structure have been studied in this study. The present wing model has a airfoil cross section and the linear variation of spanwise thickness. Structural vibration analysis is performed based on the finite element method using sandwich and beam elements. Unsteady aerodynamic technique used on the doublet lattice method has been effectively used to conduct the frequency-domain flutter analyses. The parametric flutter studies have been performed for various structural design parameters. Computational results on flutter stability due to the variation of structural parameters are presented and its related characteristics are investigated through the comparison of results.