• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.89-94
• /
• 2005

The compression strength of corrugated fiberboard container for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about from 30 to 40 percent owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard container for packaging the fruit and vegetables under simulated transportation environment. The vibration test system was constructed to simulate the land transportation using truck. After the package with corrugated fiberboard container was vibrated by vibration test system at various experimental conditions, the compression test for the package was performed. The compression strength of corrugated fiberboard container decreased with loading weight and vibrating time. The multiple nonlinear regression equation for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibrating time. The influence of loading weight on the decreasing rate of corrugated fiberboard container was larger than other variables.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.180-181
• /
• 2018

JPEG은 가장 널리 사용되는 표준 이미지 압축기술이다. 본 논문에서는 이미지 압축 알고리즘을 소개하고 압축 및 압축 해제의 각 단계를 서술하고자 한다. 이미지 압축은 디지털 이미지를 데이터 압축을 적용하는 과정이다. 이산여현변환은 시간 도메인에서 주파수 도메인으로 변환하는 기술이다. 먼저, 이미지는 8 by 8 픽셀 블록으로 분할하게 된다. 둘째, 위에서 아래로 왼쪽에서 오른쪽으로 진행하면서 DCT가 각각의 블록에 적용하게 된다. 셋째, 각 블록은 양자화를 통해 압축을 진행한다. 넷째, 이미지를 구성하는 압축된 블록의 배열은 크게 줄어든 공간에 저장된다. 끝으로, 원하는 경우 이미지는 역 이산여현변환 (IDCT)을 사용하는 프로세스인 압축 해제를 통해 재구성하게 된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.321-321
• /
• 2009

This paper presents quasi-zero-stiffness (QZS) characteristic of a passive isolator using flexures under compression force. The passive isolator consists of a positive stiffness element (a vertical coil spring) and a negative stiffness element (flexures under compression force), and their proper combination of the positive and negative stiffness elements can produce both substantial static and zero dynamic stiffness, so called QZS. Firstly, a nonlinear dimensionless expression of a flexure under compression force is derived. A dynamic model of the passive isolator is developed and numerical simulations of its time and frequency response are performed. Then, undesirable nonlinear vibration is quantified using a period doubling bifurcation diagram and a Poincare's map of the isolator under forced excitation. Finally, experiments are performed to validate the QZS characteristic of the passive isolator.

• 대한의용생체공학회:의공학회지
• /
• 제13권4호
• /
• pp.323-330
• /
• 1992

A Study of Image Compression Algorithm using DCT This paper describes the system that implement a JPEG(Joint Photographic Experts Group) algorithm based on DCT(Discrete Cosine Transform) uslng CCD kameva, Image Grabber, and IBM PC. After cosine transforms the acquisited image, this algorithm quantize and entropy encode the coefficients by JPEG code table. The coefficients are reconstructed by the Huffman decoding, dequantized procedure, and Inverse cosine transform. The results obtained from the impleulented system are as follows. (1) For effcient storage and easy implementation, this system save Image as a PCX formal (2) Thls system get 7:1 compression ratio(3.8 RMSE value) without large distortion. (3) With a low pass filtering, thls system eliminate high frequency components and get 20% enhanced compression ratio. (4) Thls system enhance the reconstructed Image using histogram modeling.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1787-1790
• /
• 2003

In this paper. we proposed a hardware(H/W) structure which can compress the video and embed the watermark in real time operation and implemented it into a FPGA platform using VHDL(VHSIC Hardware Description Language). All the image processing element to process both compression and reconstruction in a FPGA were considered each of them was mapped into H/W with the efficient structure for FPGA. The global operations of the designed H/W consists of the image compression with the watermarking and the reconstruction, and the watermarking operation is concurrently operated with the image compression. The implemented H/W used the 59％(12943) LAB(Logic Array Block) and 9％(28352) ESB(Embedded System Block) in the APEX20KC EP20K600CB652-7 FPGA chip of ALTERA, and stably operated in the 70㎒ clock frequency over. So we verified the real time operation, 60 fields/sec(30 frames/sec).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2303-2306
• /
• 2003

The Wavelet Transform providing both of the frequency and time information of an image is proved to be very much effective for the compression of images, and recently lot of studies on coding algorithms for images decomposed by the wavelet transform together with the multiresolution theory are going on. This paper proposes a Quadtree decompositon method of image compression applied to the images decomposed by wavelet transform by using the correlations between pixels .Since the coefficients obtained by the wavelet transform have high correlations between scales, the Quadtree method can reduce the data quantity effectively The experimental image with 256${\times}$256 size was used to compare the Performances of the existing and the proposed compression methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.6-8
• /
• 2006

Using enhanced ordering scheme of graylevel in an image, we can apply it to lossless image compression in this paper. The proposed method is ordering scheme to replace an original grayscale image with a particular ordered image without additional information. From the simulation, it is verified that the proposed method reduces the bit rates than plain ordering scheme. And it can be applied in various fields of lossless compression, water marking and edge detection.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.288-296
• /
• 2022

We propose and experimentally demonstrate a novel photonic compressive sensing (CS) scheme for acquiring sparse radio frequency signals with adjustable compression ratio in this paper. The sparse signal to be measured and a pseudo-random binary sequence are modulated on consecutively connected chirped pulses. The modulated pulses are compressed into short pulses after propagating through a dispersive element. A programmable optical filter based on spatial light modulator is used to realize spectral segmentation and demultiplexing. After spectral segmentation, the compressed pulses are transformed into several sub-pulses and each of them corresponds to a measurement in CS. The major advantage of the proposed scheme lies in its adjustable compression ratio, which enables the system adaptive to the sparse signals with variable sparsity levels and bandwidths. Experimental demonstration and further simulation results are presented to verify the feasibility and potential of the approach.

• 한국의류산업학회지
• /
• 제16권3호
• /
• pp.421-433
• /
• 2014

The aim of this study was to provide compression wear manufacture brands with information needed for product development. 8 tops and 7 bottoms from widely recognized compression wear manufacture brands were selected, and their product structural elements were analyzed, too. The results showed that most compression wear designs were applications of cutting lines designed considering muscle movements of the human body. The average number of cutting lines for patterns and designs were 14 for tops and 15 for bottoms. Different colored material was mainly used on the top for areas that require ventilation or high movement during sports for tops, and for areas that require muscle and joint support during sports for bottoms. The functionality of top materials were found to be stretch, muscle support, moisture absorption and high speed drying, warmth and ventilation for tops, in order of frequency, and stretch, muscle support, moisture absorption and high speed drying, and pressure for bottoms, in order of frequency. Tops were cut in the direction of the lengthwise grain, and bottoms were not only cut in the direction of the lengthwise grain, but also in the direction of the crosswise grain and bias for many products. Tops consisted of an average of 13 organically connected panels, and bottoms consisted of an average of 18 organically connected panels, which was analyzed to improve functionality. The average clothing surface area stretch rate was 85.7% for tops and 70.0% for bottoms, indicating that bottoms were designed to have higher strain rates compared to tops.

• Tribology and Lubricants
• /
• 제39권4호
• /
• pp.154-166
• /
• 2023

This study establishes a numerical analysis model of the finite element overhung rotor supported by a DTRB and describes the stiffness properties of the DTRB. The vibration characteristics and contact pressure of the RBR system are predicted according to the DTRB support characteristics such as the initial axial compression and roller profile. The stiffness of the DTRB significantly varies depending on the initial axial compression and external load owing to the occurrence of rollers under the no-load condition and increase in the Hertz contact force. The increase in the initial axial compression increases the rigidity of the DTRB, thereby reducing the displacement of the RBR system and simultaneously increasing the natural frequency. However, above a certain initial axial compression, the effect becomes insignificant, and an excessive increase in the initial axial compression increases the contact pressure. The roller crowning radius, which gives a curvature in the longitudinal direction of the roller, decreases the displacement of the RBR system and increases the natural frequency as the value increases. However, an increase in the crowning radius increases the edge stress, causing a negative effect in terms of the contact pressure. These results show that the DTRB support characteristics required for reducing the vibration and contact pressure of the RBR system supported by the DTRB can be designed.