• Explosives and Blasting
• /
• v.41 no.1
• /
• pp.32-45
• /
• 2023

Environmental regulations in Korea for blasting at industrial sites have conservative standards, which often result in reduced efficiency and cost-effectiveness due to the consideration of environmental regulations and public complaints. Therefore, there is a need for blasting methods that can reduce environmental damage while improving construction efficiency and cost-effectiveness. In this study, we analyzed the effects of the PA-Deck (Paraffin Air-Deck) blasting method, which is a kind of Air Decoupled Charge method in principle utilizing a paraffin-infused paper tube as an air gap, on reducing blasting hazards and improving blasting efficiency. The analysis also evaluated the effectiveness of newly applied equipment for collecting blasting vibration data, and derived the relationship between the explosion velocity and vibration velocity of explosives, and performed frequency analysis of the vertical component. The results of the blasting vibration velocity analysis showed that the Paraffin Waxed Paper Tube-based blasting method exhibited significantly lower vibration velocities compared to conventional blasting methods, and it was judged that more uniformly small-sized fragmented rocks were generated.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.353-353
• /
• 2017

Rice yield of South Korea in 2015 was the highest of the last 30 years. It is important issue to establish food policy whether the historically highest yield in 2015 can be continued or just one-off event. Therefore, it is necessary to understand whether such a high yield as 2015 will be reoccurred. The aim of this study was to find out what climatic factor affect rice yield and how often these climatic factor could occur. For this study, the yield monitoring data from National Institute of Crop Science, Rural Development Administration and the meteorological data provided by Korea Meteorological Administration are used to identify the weather conditions could cause high yield, and how often these conditions occurred in the past. Our results indicated that such as high yield as 2015 could occur only when the mean sunshine hours of July and the mean sunshine hours from the end of August to early September was more than 5.1 hours and 6 hours, respectively. Mean sunshine hour of July may be related to grain number. The mean sunshine hour from the end of August to early September was presumed to relate to grain filling ratio. The relationship between monthly mean temperature and yield or yield component was not clear in this study. In this study, any cycle of high weather condition was not found. Therefore, the probability of high yield weather condition was expressed by frequency. The frequency of the sunshine hour, could make high yield, were 8/35 (23%) over the past 35 years. And the frequency of two years consecutive sunshine hour condition, which could cause high yield, was 1/35 (2.9%). The frequency of recurrence of sunshine hour making high yield within the next 5 years or 10 years after high yield weather condition were 4/35 (11.4%). After all, the high yield as much as yield of 2015 could not be one-off event. But it was not also consecutive event.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.862-866
• /
• 2002

This study was performed to analyze aroma pattern of Panax species (Korean Panax ginseng C.A. Meyer, Chinese Panax ginseng C.A. Meyer, Panax quinquefolium L, and Panax notoginseng F.H. Chen) by the PHGC (potable handheld gas chromatograph). Ratios of several peak areas in chromatogram of derivative parrtern were as follows. If ratio of Korean Panax ginseng was 1, Panax notoginseng was $0.030{\sim}0.674$, Chinese Panax ginseng was $0.005{\sim}0.212$ and panax quinquefolium was $0.241{\sim}0.871$. Ratios of peak area at $Rt_{20.02}$ were that if Korean panax ginseng was 1, Chinese Panax ginseng was 0.212, Panax quinquefolium was 0.343 and Panax notoginseng was 0.065. Ratios also of peak area at $Rt_{21.70}\;and\;Rt_{24.90}$ showed clear difference among aroma patterns of Panax specie cultivars. Flavor component at $Rt_{26.15}$ was not detected in Panax quinquefolium and Panax notoginseng but in Korean Panax ginseng and Chinese Panax ginseng. Ratios of peak area at $Rt_{26.15}$ were that if Korean Panax ginseng was 1, Chinese Panax ginseng was 0.185. And so habitat of Panax species cultivars was discriminated. Cultivar and habitat of dried panax species was remarkably distinguised by the chromatogram of frequency pattern, derivative pattern and visual pattern using olfactory images known as Vapor $print^{TM}$.

• Korean Journal of Plant Resources
• /
• v.12 no.4
• /
• pp.312-323
• /
• 1999

External morphology, principal component analysis, cluster analysis, and vegetation were investigated to understand the taxonomic relationships and native environmental characters of Megaleranthis saniculifolia populations in four different habitats. Morphological characters such as calyx length and width, calyx index, presence or absence of serrate in calyx lobe, length of peduncle, branch of peduncle and fruit characters were useful for the identification of four different habitats. But, characters of plant height, bract and seed in four habitats were similar. The results obtained based on the principal component(PC) analysis of treated 96 OTU were divided into two groups by PC 1, 2, 3, and the sums of contributions for the total variance were 66.79%(PC1 31.3%, PC2 20.7%, PC3 15.8%, respectively), and only Mt. Taeki population was distinctly different from populations of other three habitats. In cluster analysis based on average linkage cluster analysis and Ward's method, there were similarities in the composition of clustered taxa, and each populations were not identified. Importance value by relative coverage and frequency appeared in M. saniculifolia(50.81%), Aruncus dioicus(12.64%), Corydalus turtschanovii(11.62%), Veratrum oxysepalum(11.45%), Anemone koraiensis(8.96%), Meehania urticifolia(8.76%), Filipendula palmata(7.06%), Aconitum pseudo-laeve(5.66%), Pseudostellaria palibiniana(5.45%) and Smilacina japonica(5.25%), respectively. These species were considered to be highly similar with M. saniculifolia. The highest importance value in all investigated sites was M. saniculifolia, but specific composition of high level different from each habitat. Average diversity of species was 1.40, and the highest in Mt. Kwangdeok(1.31), lowest in Mt. Jumbong(1.17). Average soil pH was 5.25 and similar in each habitat. Although the lowest content of K ion, but the highest the EC, water capacity, organic compound, Ca content were found in soil of Mt. Sobaek. Soils in Mt. Kwangdeok had the lowest content of EC, organic compound, Ca. Soils of Mt. Jumbong showed the highest of Mg content, but the lowest of water capacity, $P_2O_5$, and K contents.

• Herbal Formula Science
• /
• v.25 no.4
• /
• pp.553-574
• /
• 2017

The purpose of this study is to find out effects of prescriptions according to the formula, manipulation of Rhei Rhizoma, configuration. The following results were reached through investigations on the prescriptions using Rhei Rhizoma as a main component. Objectives : Analysis of prescriptions According to the formula : Liquid Extract Prescriptions were used widely on three parts to treat fever and damp heat in the interior organs. Powder Prescriptions were taken with hot water, thin porridge, tea etc. to treat damp heat, congestion of phlegm, acute episodes. Liquid Mixed Pill treat congestion of QI, damp heat, phlegm. Honey Mixed Pill treat accumulated fever, distension, acute excessive fever. Paste Pill treat blood stagnation, excessive toxic-fever, epidemic diseases. External Application treat inflammation by injury, swelling due to severe fever by internal damage. Methods : Analysis of prescriptions According to the manipulation of Rhei Rhizoma : Prescriptions including Liquor processed Rhei Rhizoma treat excessive toxic-fever, congestion of phlegm, blocking orifices on the upper side. Steamed Rhei Rhizoma strengthen effects of making evacuate and cooling of heat. Processed Rhei Rhizoma with vinegar strengthen effects of removing blood stagnation by activating blood movement, releasing gathering. Results : Analysis of prescriptions According to the Composition of Rhei Rhizoma : 41% of the total prescriptions were on the area of less than 20%. In case of lower groups show increased frequency of combination with Pharbitidis Semen, Persicae Semen, Scutellariae Radix and manipulation of baking, steaming, roasting. In case of higher groups show increased frequency of treating excess syndrome, critical illness, acute severe illness, and using proccesed Rhei Rhizoma with vinegar. Treatment of damp heat on the liver and gallbladder, disorder of the spleen and stomach is done mostly by prescriptions on the area of less than 30%. Conclusions : Rhei Rhizoma-Coptidis Rhizoma pair treat damp heat, heat toxins in blood, and Constipation caused by excessive heat. Rhei Rhizoma-Glycyrrhizae Radix pair relieve effects of Rhei Rhizoma passing blocked feces, removing the poison, activating blood movement, releasing gathering with the effects of Glycyrrhizae Radix relaxing tension by harmonizing Middle. Rhei Rhizoma-Magnoliae Cortex pair are used to treat damp heat in middle area, excessive heat in the stomach and intestine. Rhei Rhizoma-Pharbitidis Semen pair act on both blood system and QI system treating edema, damp, stagnation, heat toxins, feces. Rhei Rhizoma-Persicae Semen pair treat blood stagnation with fever on blood system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1225-1232
• /
• 2008

In this paper, we describe a compensation method of diurnal effect which is one of the factors giving large effect on the performance when using ground-wave signals like Loran-C for a backup and substitute navigation system of global satellite navigation system such as GPS, and currently many researches of the topics are doing in USA and in Europe. In order to compensate diurnal effect, we find periodic frequency components by using the Least Square Spectral Analysis (LSSA) method at first and then compensate the effect by subtracting the estimated compensation signal, obtained by using the estimated amplitude and phase of the individual frequency component, from the original signal. In this paper, we propose a simple compensation algorithm and analysis the performance through simulations. From the results, it is observed that the amplitude and phase can be estimated with under 5 % and 0.17 % in a somewhat poor receiving situation with 0 dB Signal to Noise Ratio (SNR). Also, we analyze the obtainable performance improvement after compensation by using the measured Loran-C data. From the results, it is observed that we can get about 22 % performance improvement when a moving average with 5 minutes interval is employed.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.1
• /
• pp.74-82
• /
• 2016

In this paper, a new automatic speech recognition (ASR) was proposed where ultrasonic doppler signals were used, instead of conventional speech signals. The proposed method has the advantages over the conventional speech/non-speech-based ASR including robustness against acoustic noises and user comfortability associated with usage of the non-contact sensor. In the method proposed herein, 40 kHz ultrasonic signal was radiated toward to the mouth and the reflected ultrasonic signals were then received. Frequency shift caused by the doppler effects was used to implement ASR. The proposed method employed multi-channel ultrasonic signals acquired from the various locations, which is different from the previous method where single channel ultrasonic signal was employed. The PCA(Principal Component Analysis) coefficients were used as the features of ASR in which hidden markov model (HMM) with left-right model was adopted. To verify the feasibility of the proposed ASR, the speech recognition experiment was carried out the 60 Korean isolated words obtained from the six speakers. Moreover, the experiment results showed that the overall word recognition rates were comparable with the conventional speech-based ASR methods and the performance of the proposed method was superior to the conventional signal channel ASR method. Especially, the average recognition rate of 90 % was maintained under the noise environments.

• Journal of Aerospace System Engineering
• /
• v.13 no.6
• /
• pp.52-59
• /
• 2019

The rotor blade is a key component that generates the lift, thrust, and control forces required for helicopter flight by the torque transmitted through the hub and the blade pitch angle control, and should be designed to factor vibration characteristics so that there is no risk of resonance with structural safety. In this study, the structural design of the main rotor blade for MPUH(Multi-Purpose Unmanned Helicopter) was conducted and the sectional stiffness measurement of the fabricated blade was performed. The evaluation of the vibration characteristics of the main rotor system was then conducted factoring the measured stiffness distribution. The interior of the rotor blade comprised of the skin, spar, and torsion box, and carbon and glass fiber composites were applied. The Ksec2D program was applied to predict the stiffness of blade, and the results were compared to the measured data. CAMRADII, a comprehensive rotorcraft analysis program, was applied to investigate the natural frequency trends and resonance risks due to the rotor rotation.

• Journal of Applied Reliability
• /
• v.14 no.4
• /
• pp.213-219
• /
• 2014

Wind turbine, which is attracting part of the renewable energy and is researching continuously, is going to be large size for high efficiency. There is a yaw system rotating the nacelle, weighted about 600 tons, to be perpendicular with the wind direction blowing in the large wind turbine. The wind turbine is focusing on the reliability improvement because working environment effect is bigger than any other points and specially, the reliability improvement of the yaw drive is required by the customer because it is the key component of the wind turbine. Because of this, the establishment of criteria for yaw drive is required because yaw drive system is the part of the wind turbine closely related with ensuring the reliability. So, this study did the failure analysis of the yaw drive system, which is consisted with 10 sets of yaw drives through researching and analyzing the site conditions. Also this study designed the life test method based on the failure analysis and working condition of the yaw drive. To design the accelerated life test of the yaw drive, this study reviewed the torque, lubrication condition, and frequency of use and etc. Finally, this selected the torque as the acceleration factor which is affected mainly to the system and also, the test equipment was developed based on the requirement of the life and performance test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.31-38
• /
• 2015

Intelligent leak detection is an essential component of a underground water supply pipeline network such as a smart water grid system. In this network, numerous leak detection sensors are needed to cover all of the pipelines in a specific area installed at specific regular distances. It is also necessary to determine the existence of any leaks and estimate its location within a short time after it occurs. In this study, the leak signal properties and feasibility of leak location detection were investigated when concurrent leaks occurred at two points in a pipeline. The straight distance between the two leak sensors in the 100A sized cast-iron pipeline was 315.6 m, and their signals were measured with one leak and two concurrent leaks. Each leak location was described after analyzing the frequency properties and cross-correlation of the measured signals.