• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.958-963
• /
• 2006

The motion of a system composed of a plate, constant springs and varying dampers is considered when the system is subject to harmonic force. Letting the frequencies of harmonic force and damper variation $f_1\;and\;f_2$, respectively, the displacement at the center of the plate has the strongest component at frequency $f_1$. The angular displacement of the plate has strong components at $f_1-f_2$ and the natural frequency of the rotational mode of the system. If these two frequencies coincide, the plate oscillates with almost single frequency and a large amplitude. These results can be applied to development of a moment shaker with low frequencies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.81-85
• /
• 2006

The motion of a system composed of a plate, constant springs and varying dampers is considered when the system is subject to harmonic force. Letting the frequencies of harmonic force and damper variation ${\Large f}_1\;and\;{\Large f}_2$, respectively, the displacement at the center of the plate has the strongest component at frequency ${\Large f}_1$. The angular displacement of the plate has strong components at ${\Large f}_1-{\Large f}_2$, and the natural frequency of the rotational mode of the system. If these two frequencies coincide, the plate oscillates with almost single frequency and a large amplitude. These results can be applied to development of a moment shatter with low frequencies.

• 대한전기학회논문지
• /
• 제39권9호
• /
• pp.934-943
• /
• 1990

There are no turn-on losses in the series Resonant Converter which operates above the resonance frequency, and the commutation stress on the switched component is low. For a given Series Resonant Converter with specified load resistance, the output voltage is a function of the operation frequency. This paper describes the static and dynamic characteristic analysis of the Series Resonant DC to DC Converter, which is operating above the resonant frequency, with frequency control. For the analysis method, state plane technique is adopted, and the circuit operation is defined from normalized switching frequency, Fsn. Under this condition, circuit performance is analyzed ideally. The validity of the proposed analysis is verified by comparing with experimental results, the stability of the converter is confirmed against small variations around the operating point by conventional frequency domain analysis, and the stress quantity added to switch component is shown.

• 지구물리와물리탐사
• /
• 제6권3호
• /
• pp.119-125
• /
• 2003

소형루프 전자탐사법은 다양한 현장에 성공적으로 적용되어온 효과적인 물리탐사법으로 특히 천부 지반조사나 환경오염대의 조사에 널리 사용되고 있다. 일반적으로 저유도상수(low induction number)대역에서 수행되는 소형루프 전자탐사에서는 주로 기하학적 수직탐사(geometric sounding)이 사용되어 왔으나, 근자에 이르러 정확한 2차장의 측정이 가능한 일체형의 다중 주파수 소형루프 전자탐사장비가 개발되면서, 주파수 수직탐사(frequency sounding)이 시도되고 있다. 본 논문에서는 간단한 2층구조에 대하여 수평루프 전자탐사 모델링을 수행하였다. 분석 결과 동상성분의 경우에는 주파수 수직탐사이 가능하지만, 이상성분의 경우에는 기하학적 수직탐사가 효과적인 것으로 확인되었다. 그러나 동상성분의 경우 신호의 크기가 이상성분에 비하여 미약하므로 국내에서와 같이 전기전도도가 낮고 전자기적 잡음 수준이 높은 지역에서는 적용이 곤란하다. 따라서 본 논문에서는 이상성분이 신호의 크기가 커 안정적 자료획득이 가능하며, 두 개의 주파수에 측정된 이상성분의 차가 동상성분과 같은 거동특성을 보인다는 점에 착안하여, 기존의 방법과는 다른 주파수 수직탐사 방법을 제시하고자 하였다. 또한 지하의 전기전도도를 비교적 잘 반영하는 겉보기 전도도를 정의하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.643-649
• /
• 1999

In this paper, we proposed that ｉ) noise-tolerant four kinds of AM(Amplitude Modulation)-FM(Frequency Modulation) demodulators are designed, ⅱ) we derived undersampling frequency through the product via energy operator of the monocomponent AM-FM signals separated form two-component AM-FM signals, and ⅲ) these four kinds of AM-FM demodulators detect respectively information signals of the IA(Instantaneous Amplitude) and IF(Instantaneous Frequency) by undersampling frequency to be different each other from the undersampled monocomponet AM-FM signals. Particularly, the proposed algorithm can control undersampling frequency by an integer factor. And these efficient AM-FM demodulators are well worked with the undersampled AM-FM signals.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.231-234
• /
• 2009

Speckle noise reduction for power Doppler ventricle coherent image for restoration and enhancement using Fast Wavelet Transform with multi-thresholding and multi-filtering on the each subbands is presented. Fast Wavelet Transform divides into low frequency component image to high frequency component image to be multi-resolved. Speckle noise is located on high frequency component in multi-resolution image mainly. A Doppler ventricle image is transformed and inversed with separated threshold function and filtering from low to high resolved images for restoration to utilize visualization for ventricle diagnosis. The experimental result shows that the proposed method has better performance in comparison with the conventional method.

• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.136-144
• /
• 2002

Load models are very important for improving the accuracy of stability analysis and load flow studies. Various loads are connected to a power bus and their characteristics of power consumption change with voltage and frequency. Thus, the effect of voltage/frequency changes must be considered in load modeling. In this work, artificial neural networks-ANNs- were used to construct the component load models for more accurate modeling. A typical residential load was selected and subjected to a test under variable voltage/frequency conditions. Acquired data were used to construct component models by ANNs. The aggregation process of separately determined load models is also presented in the paper. Furthermore, this paper proposes a method to transform a single load model constructed by the aggregation method into a mathematical load model that can be used in traditional power system analysis software.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.156-159
• /
• 2009

Speckle noise reduction for 3D power doppler ventricle coherent image for restoration and enhancement using wavelet packet transform with separated thresholding is presented. Wavelet Packet Transform divide into low frequency component image to high frequency component image to be multi-resolved. speckle noise is located on high frequency component in multiresolution image mainly. A ventricle image is transformed and inversed with separated threshold function from low to high resolved images for restoration to be utilize visualization for ventricle diagnosis. The experimental result shows that the proposed method has better performance in comparison with the conventional method.

• 한국정밀공학회지
• /
• 제5권1호
• /
• pp.84-93
• /
• 1988

The on-line detection of the chip flow is one of the most important technologies in com- pletly automatic operation of machine tool, such as FMS and Unmanned Factories. This problem has been studied by many researchers, however, it is not solved as yet. For the recognition of chip flow in this study, the dynamic cutting force components due to the chip breaking were measured by dynamometer of piezo-electric type, and the frequency components of cutting force were also analyzed. From the measured results, the effect of cutting conditions and tool geometry on the dynamic cutting force component and chip formation were investigated in addition to the relationships between frequency of chip breaking (fB) and side serrated crack (fC) of chip. As a result, the following conclusions were obtaianed. 1) The chip formations have a large effect on the dynamic cutting force components. When chip breaking takes place, the dynamic cutting force component greatly increases, and the peridoic components appear, which correspond to maximum peak- frequency. 2) The crater wear of tool has a good effect on the chip control causing the chiup to be formed as upward-curl shape. In this case, the dymamic cutting force component greatly increases also 3) fB and fC of chip are closely corelated, and fC of chips has a large effect on the change of the situation of chip flow and dynamic cutting force component. 4) Under wide cutting conditions, the limit value (1.0 kgf) of dynamic cutting force component exists between the broken and continuous chips. Accordingly, this value is suitable for recognition of chip flow in on-line control of the cutting process.

• 응용통계연구
• /
• 제30권3호
• /
• pp.441-451
• /
• 2017

본 논문에서는 주파수공간에서의 주성분 분석을 사용하여 기상자료를 분석하고자 한다. 주파수공간에서의 주성분분석은 차원축소를 위해서도 사용되지만, 주요한 패턴을 뽑아내는 데 사용되는 통계적 방법 중 하나이다. 일반적으로 주파수공간에서의 주성분 분석은 두 가지의 방법이 있는데, Hilbert PCA와 frequency domain PCA가 그것이다. 본 논문에서는 기존의 시간공간 주성분 분석과 함께 두 가지 주파수공간 주성분 분석 방법을 비교하였다. 시뮬레이션 자료를 통하여 주파수공간 주성분 분석 방법의 유용성을 보였으며, 열대 태평양 지역의 해수표층 온도값에 주성분 분석 방법들을 적용하여 기상자료 분석에 대한 유용성을 확인하였다.