• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.634-641
• /
• 2022

A frequency stable and tunable optoelectronic oscillator (OEO) incorporating an optical phase shifter and a phase-shifted fiber Bragg grating (PS-FBG) is designed and analyzed. The frequency tunability of the OEO can be realized by using a tunable microwave photonic bandpass filter consisting of a PS-FBG, a phase modulator. The optical phase compensation loop is used to compensate for the phase variations of the RF signal from the OEO by adjusting an optical phase shifter. Simulation results demonstrate that the output RF signals of the OEO can be tuned in a frequency range of 118 MHz to 24.092 GHz. When the ambient temperature fluctuates within ±3.9 ℃, the frequency drifts of the output RF signals are less than 68 Hz, the side-mode suppression ratios are more than 69.39 dB, and the phase noise is less than -92.49 dBc/Hz at a 10 kHz offset frequency.

• 한국전자파학회논문지
• /
• 제26권7호
• /
• pp.656-665
• /
• 2015

본 논문에서는 시간-주파수 변환에 요동보상을 적용한 UWB 레이다 Bistatic ISAR (Bistatic Inverse Synthetic Aperture Radar: B-ISAR) 이미징에 적용하여 레이다 이미징의 선명도와 품질을 개선하였다. UWB 레이다를 사용하여 제안하는 시간-주파수 알고리즘을 검증하였으며, 이를 위하여 B-ISAR 알고리즘 절차, 시간-주파수 변환과 요동보상 개선 등 필요한 이론적 근거를 제시하였다. B-ISAR 이미징 알고리즘으로 이미지를 생성하였으며, UWB 바이스테틱 ISAR 이미징 생성시 요동보상을 적용한 시간-주파수 변환 기법인 STFT(Short-Time Fourier Transform), GWT(Gabor Wavelet Transform), WVD(Wigner-Ville distribution) 방식을 차례대로 구현하였다. 그리고 STFT, GWT와 WVD 알고리즘을 이용하여 B-ISAR 이미징 알고리즘의 성능을 비교하였으며, 그 결과 WVD가 다른 방식들에 비하여 영상이 선명하고, 퍼짐 현상이 줄어듦을 알 수 있었다.

• 한국전자파학회논문지
• /
• 제21권3호
• /
• pp.223-228
• /
• 2010

본 논문에서는 온도 센서와 OP-AMP를 이용하여 X-밴드용 전압제어 발진기를 위한 온도 보상 회로를 구현하였다. 온도 변화에 대해 선형적인 특성을 갖는 온도 센서의 출력 전압을 튜닝 전압에 더해서 전압제어 발진기에 인가함으로써 온도에 따른 주파수 이동을 보상할 수 있었다. -30~+$60^{\circ}C$의 온도 범위에서 9.95~10.05 GHz의 대역에 대해 온도 보상을 한 결과, 전체 대역폭에서 출력 주파수는 온도 보상 전 71~73 MHz가 변화했으나, 온도보상 후에는 6.6~4.4 MHz의 변화를 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.76.3-76
• /
• 2001

In this paper, an adaptive disturbance compensation technique is used in a tracking problem, under which the tracking reference is unknown. Based on a simple disturbance observer that effectively estimates the low frequency components of disturbance, the feedforward compensation is applied in addition to the conventional feedback control. Under the proposed compensation method, sensitivity analysis is given to illustrate the effectiveness. Finally, the proposed method is applied to the tracking problem in an optical storage system.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.147-152
• /
• 2016

In radio-over-fiber (RoF) systems, nonlinear compensation is essential to improve performance. Among the several existing nonlinear compensation techniques, we investigate a predistortion technique for a directly modulated laser in an RoF system. First, we obtain the input-to-output response of a directly modulated laser at 160, 820, and 1,540 MHz. The results show that the laser response is dependent on the frequency band. Second, we design an optimal predistortion circuit to compensate for the nonlinear responses of three frequency bands. We design the predistortion circuit with two options: each predistortion circuit for each frequency band and one single predistortion circuit for all the three frequency bands. Finally, we present the simulation results of the predistortion system obtained using a commercial simulator. These results show that the third intermodulation distortion (IMD3) is improved by 0.6-9 dB for the three frequency bands with only a single predistortion circuit.

• 아동학회지
• /
• 제30권4호
• /
• pp.1-14
• /
• 2009

This research examined perceptions of parents and directors of child-care centers about safety, injury prevention, and range and level of compensation. Subjects were 285 parents and 297 directors of child-care centersin Kyunggi Province.Data were analyzed by t-test. Results showed differences between perceptions of parents and directors : parents considered the content and frequency of safety education to be more important; directors considered preparation for safety and safety management of equipment for injury prevention to be more important. Parents thought that range of compensation should include travel to and from the child-care center; directors thought that range of compensation should include sudden infant death. There was no difference between parents and directors regarding amount, subject, and process of compensation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권3호
• /
• pp.154-161
• /
• 2005

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.

• 대한통합의학회지
• /
• 제10권3호
• /
• pp.173-184
• /
• 2022

Purpose : The purpose of this study was two-fold: to identify the effect of dental hygienist's self-determination motivation on their job engagement and to analyze the moderating effect of compensation satisfaction that affect the relevance. Methods : Data were collected using a structured self-report questionnaire administered to 260 dental hygienists working in dental hospitals and clinics in Busan, South Korea. These were analyzed using IBM SPSS Statistics version 26.0 and SPSS Process Macro 3.5. A frequency analysis, including the respondents' general characteristics, frequency, percentages, and standard deviations, was performed. A regression analysis was also performed using SPSS Process Macro to verify the moderating effect of compensation satisfaction in the effect of self-determination motivation on job engagement. Results : The self-determination motivation of the dental hygienists had a statistically significant positive effect on their job engagement, which was the dependent variable. Higher intangible compensation satisfaction levels led to a stronger effect of intrinsic motivation but a weaker effect of extrinsic motivation on job engagement. Moreover, higher tangible compensation satisfaction levels strengthened the effect of intrinsic motivation on job engagement. Conclusion : Recently, the demand for oral health care has been increasing, Competition in the dental medical service market warrants, high-quality dental services based on accurate diagnosis and treatment. In this context, dental hygienists' job engagement must be improved. For this purpose, increasing the satisfaction of dental hygienists with self-determination motivation and appropriate compensation is effective. In addition, attention must be paid to the moderating effect of compensation satisfaction on the relationship between intrinsic motivation and job engagement. On the basis of the implications of this study, the results can be used as basic data for improving dental hygienists' welfare system and manpower management.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.253-257
• /
• 2010

The frequency is an important operation parameter for the control, protection, and stability of a power system. The frequency as a key index of power quality can be indicative of system abnormal conditions and disturbances. Due to the sudden change in generation and loads or faults in power system, the frequency is supposed to deviate from its nominal value. It is essential that the frequency must be maintained very close to its nominal frequency. An accurate monitoring of the power frequency is essential to optimal operation and prevention for wide area blackout. As most conventional frequency estimation schemes are based on DFT filter, it has been pointed out that the gain error could cause defects when the frequency is deviated from nominal value. This paper presents an advanced frequency estimation technique using gain compensation to improve the performance of DFT filter based techniques. To evaluate performance of the proposed algorithm, the 765kV T/L system in Korea is simulated by EMTP-RV software. The proposed technique can reduce the gain error caused when the power system frequency deviates from nominal value.

• 한국통신학회논문지
• /
• 제40권9호
• /
• pp.1699-1709
• /
• 2015

고속열차와 같은 이동체는 높은 도플러 주파수 천이가 발생하고, 이에 따라 높은 캐리어 주파수 옵셋이 생겨서 이를 보상하지 않으면 통신 성능의 열화를 가져온다. OFDMA 방식의 다중 단말 접속 방식에서 기지국이 상향링크 주파수 옵셋을 보상하기 위해서 복잡한 하드웨어가 필요하다. 본 논문은 기지국의 부담을 줄이고, 간단하게 주파수 옵셋 추정 및 보상을 하기 위한 방법을 제안한다. 제안한 방법은 주파수 옵셋 보상을 위해 하드웨어로 단말은 추가로 곱셈기 하나만 필요하여, 기지국 직접 보상에 비해서 많은 하드웨어를 감소시킬 수 있다. 제안한 방법은 밀리미터 통신 기반 고속철도 통신 시스템 환경에서 시뮬레이션을 수행하였다. 시뮬레이션을 통해서 제안한 방법이 5G 이동통신의 요구사항인 500 km/h 속도의 높은 도플러 주파수 천이 상황에서도 효과적으로 동작함을 확인 하였다.