• ETRI Journal
• /
• v.44 no.4
• /
• pp.531-542
• /
• 2022

With the increasing demand for unlicensed spectrum, several regulators have been opening up the 6-GHz band for unlicensed use while ensuring compliance with the technical requirement to avoid harmful interference in the existing primary services (PSs). In this paper, we present two methodologies, a channel-based method and a frequency-based method, which are applicable to a frequency coordination system that calculates the permissible transmit power in the channels or frequencies available to a secondary service (SS). In addition, we have demonstrated that the available transmit power of an SS can be maximized by adjusting the power allocation of the assigned resource units under the condition that the channel of the SS is partially overlapped with that of the PS. Based on the analysis results, it is suggested that it would be better to utilize the two methods selectively according to the operating channel conditions of the PS and the SS.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.10-20
• /
• 2007

For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.74-82
• /
• 2011

SSD has a limitation of number of erase/write cycles and does not allow in-place update unlike the hard disk because SSD is composed of an array of NAND flash memory. Thus, FTL is used to effectively manage SSD of having different characteristics from traditional disk. FTL has page, block, log-block mapping method. Among then, when log-block mapping method such as BAST and FAST is used, the performance of SSD is degraded because frequent merge operations cause lots of pages to be copied and deleted. This paper proposes a data allocation and replacement method based on access frequency by allocating PRAM as checking area of access frequency, log blocks, storing region of hot data in SSD. The proposed method can enhance the performance and lifetime of SSD by storing cold data to flash memory and storing log blocks and frequently accessed data to PRAM and then reducing merge and erase operations. Besides, a data replacement method is used to increase utilization of PRAM which has limitation of capacity. The experimental results show that the ratio of erase operations of the proposed method is 46%, 38% smaller than those of BAST and FAST and the write performance of the proposed method is 34%, 19% higher than those of BAST and FAST, and the read performance of the proposed method is 5%, 3% higher than those of BAST and FAST, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.307-314
• /
• 2011

A new predistortion technique for dynamic spectrum allocation systems such as cognitive radio (CR) is proposed. The system model considered in this paper occupies a small band at a time, but the center frequency can be changed in the wide range of frequency. In this scenario. the front-end filter may not eliminate the harmonics of the power amplifier (PA) output. The proposed PD reduces the spectral regrowth of the fundamental signal at the carrier frequency (${\omega}_0$) and removes the harmonics ($2{\omega}_0$, $3{\omega}_0$, ...) at the same time. The proposed PD structure is composed of multiple predistorters (PDs) centered at integer multiples of ${\omega}_0$. The PD at ${\omega}_0$ is for removing spectral regrowth of the fundamental signal, and the others are for harmonic reduction. In the proposed PD structure, parameters of PDs are found jointly. Simulation results show that the spectral regrowth can be reduced by 20dB, and the 2nd and 3rd harmonics can be reduced down to -70dB from the power of the fundamental signal.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.21-32
• /
• 2008

Cognitive radio (CR) has been proposed as an effective technology for flexible use of the radio spectrum. The interference between primary users and CR users, however, becomes a critical problem when they are using adjacent frequency channels with different transmission power levels. In this paper, a robust CR orthogonal frequency division multiplexing (OFDM) architecture, which can effectively suppress interference to nearby primary users and overcome adjacent channel interference (ACI) to the CR user, is proposed. This new approach is characterized by adaptive data repetition for subcarriers under heavy ACI, and adaptive time spreading for subcarriers near the borders of the CR user's spectrum. The data repetition scheme provides extra power gain against the ACI coming from primary users. Time spreading guarantees an acceptable interference level to nearby primary users. By computer simulation, we demonstrate that, under a CR environment, the proposed CR OFDM architecture outperforms conventional OFDM systems in terms of throughput and BER performance.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.137-142
• /
• 2015

This paper analyzed the background and status of studies for WRC-15 agenda item which considers additional frequency allocations to the fixed-satellite service in Ku-band and considered national future countermeasures. Satellite frequency can be acquired through compliance with the Radio Regulations for international registration and it has been recognized as the limited natural resource, and which leads to intensifying the competition among countries for the preoccupancy of it. Under the circumstances, WRC-15 is going to consider additional allocations to the fixed-satellite service in Ku-band and it is necessary to cope with the situation taking into account adequate protection of the existing services and future plan of frequency usage by the fixed-satellite service.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.179-180
• /
• 2015

High wind penetration might cause the frequency stability problem because a wind power plant (WPP) is operating in a maximum power tracking mode to extract the maximal energy from wind and thus does not react to the system frequency variation. Therefore, the system operators encourage a WPP to participate in frequency control, which includes inertia/orl and primary control. The frequency support capability of a WPP depends on the amount of kinetic energy (KE) and reserve. This paper formulates an optimization problem to maximize KE while retaining the required reserve. The proposed optimization problem would allow wind generators (WGs) with a smaller wind speed to retaine more KE. The performance of the proposed optimization problem was investigated in a 100-MW WPP consisting of 20 units of 5-MW permanent magnet synchronous generators using an EMTP-RV simulator. The results show that the proposed optimization problem successfully improves the frequency nadir more than a conventional reserve allocation that distributes WGs proportional to the current output.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.601-609
• /
• 2013

One of the most serious factors constraining the next generation cellular mobile consumer communication systems will be the severe co-channel interference experienced at the cell edge. Such a capacity-degrading impairment combined with the limited available spectrum resource makes it essential to develop more spectrally efficient solutions to enhance the system performance and enrich the mobile user's application services. This paper proposes a unique hybrid method of frequency hopping (FH) and subcarrier-reuse-partitioning that can maximize the system capacity by efficiently utilizing the available spectrum while at the same time reduce the co-channel interference effect. The main feature of the proposed method is that it applies an optimal combination of different frequency reuse factors (FRF) and FH-subcarrier allocation patterns into the partitioned cell regions. From the simulation results, it is shown that the proposed method can achieve the optimum number of subcarrier subsets according to the frequency-reuse distance and results in better performance than the fixed FRF methods, for a given partitioning arrangement. The results are presented in the context of both blocking probability and BER performances. It will also be shown how the proposed scheme is well suited to FH-OFDMA based cellular systems aiming at low co-channel interference performance and optimized number of subcarriers.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.472-480
• /
• 2011

In this paper, we investigate two new candidate transmission schemes, non-orthogonal frequency reuse (NOFR) and beam-hopping (BH). They operate in different domains (frequency and time/space, respectively), and we want to know which domain shows overall best performance. We propose a novel formulation of the signal-to-interference plus noise ratio (SINR) which allows us to prove the frequency/time duality of these schemes. Further, we propose two novel capacity optimization approaches assuming per-beam SINR constraints in order to use the satellite resources (e.g., power and bandwidth) more efficiently. Moreover, we develop a general methodology to include technological constraints due to realistic implementations, and obtain the main factors that prevent the two technologies dual of each other in practice, and formulate the technological gap between them. The Shannon capacity (upper bound) and current state-of-the-art coding and modulations are analyzed in order to quantify the gap and to evaluate the performance of the two candidate schemes. Simulation results show significant improvements in terms of power gain, spectral efficiency and traffic matching ratio when comparing with conventional systems, which are designed based on uniform bandwidth and power allocation. The results also show that BH system turns out to show a less complex design and performs better than NOFR system specially for non-real time services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.44-50
• /
• 2007

In typical MC-CDMA systems, different frequency-domain scrambling codes are randomly chosen from a given code set and then assigned to different subscriber stations using the same subcarrier set. When orthogonal codes are employed for the frequency-domain scrambling, the choice of the scrambling code does not affect the detection performance if the timing and frequency synchronizations are perfect and the channel characteristic is flat. However, in practical cases, inter-code interference often appears due to the broken code orthogonality. In this paper, the optimal order of allocating the orthogonal frequency-domain scrambling codes to new subscriber stations is derived under non-negligible timing offsets in MC-CDMA system.