• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.6
• /
• pp.903-911
• /
• 2008

The effects of salt and bicarbonate solution on overall meat quality in beef biceps femoris muscle were investigated with the application of chilling and freezing conditions. Muscles were injected to a target of 120% of original meat weight with a solution containing 1.2 M sodium chloride, 0.25 M sodium bicarbonate and 0.1% ascorbic acid (pH 7.2). Half of the meat samples, considered as chill treatment and chill control, were stored at $4^{\circ}C$ up to five days; while the other half, frozen treatment and frozen control, were kept in a freezer at $-20^{\circ}C$ for seven days. Compared with untreated control, treated meats had higher water holding capacity (p<0.05), lower drip loss (p<0.05) and lower shear force (p<0.07) with higher overall acceptability (p<0.05) in sensory evaluation. Morphological observations demonstrated smooth and gummy meat surface due to the solubilization of myofibrillar proteins and the distortion of connective tissue in treated raw meats; and in the case of cooked meat, treatment caused the fragmentation of myofibrils, which might be responsible for a lower shear value in salt-bicarbonate treated beef biceps femoris muscle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.303-308
• /
• 2013

Subfertility problems are encountered frequently in the cattle and buffalo bulls commercially maintained for semen production in dairy farms and under field conditions for natural insemination. Reports are scarce on the incidence of subfertility in breeding bulls, especially in India. The objective of the present study was to assess the incidence of the male reproductive anomalies leading to disposal of bovine bulls at GADVASU dairy farm, Ludhiana, Punjab (India). Data on frequency of various subfertility and disposal pattern of bulls maintained at the dairy farm, GADVASU, were collected for 12 yrs (1999 to 2010) and compiled from different record registers. Percentage of bulls that produced freezable semen (out of reserved ones) was less in cattle (25.641%) as compared to that of buffalo (30.4%). Various subfertility traits like poor libido and unacceptable seminal profile were found to be the significant reasons (p<0.01) for culling of the breeding bulls. Inadequate sex drive and poor semen quality were the main contributing factors for bull disposal in cattle whereas poor semen freezability was most frequently observed in buffalo bulls. All the male reproductive traits were significantly different (p<0.05) for the periods of birth, except for semen volume, initial motility (IM), age at last semen collection (ALSC) and age at disposal. The ages at first and last semen collection as well as freezing (i.e. AFSC, ALSC and AFSF, ALSF, respectively) and age at disposal (AD) were higher in buffalo. The spermatological parameters and semen production period (SPP) were higher in cattle. The age at first semen donation and breeding period could be reduced by introducing the bulls to training at an early age. The results revealed an increasing trend in individual motility (IM) while semen volume, AFSC, AFSF, AD, FSPP, SPP, ALSC and ALSF showed a decreasing, however, not a definite trend, over the periods. The semen donation traits like, AFSF, of the cattle and buffalo bulls could be predicted from the AFSC, using prediction equation derived in the present study.

• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.114-122
• /
• 2016

Concrete is cost-benefit and high-durable construction material, however durability problem can be caused due to steel corrosion under chloride attack. Recently deicing salt has been widely spread in snowing season, which accelerates micro-cracks and scaling in surface concrete and the melted deicing salt causes corrosion in embedded steel. The previous governing equation of Fick's 2nd Law cannot evaluate the deteriorated surface concrete so that another technique is needed for the surface effect. This paper presents chloride penetration analysis technique for concrete subjected to deicing salt utilizing multi-layer diffusion model and time-dependent diffusion behavior. For the work, field investigation results of concrete pavement exposed deicing salt for 18 years are adopted. Through reverse analysis, deteriorated depth and increased diffusion coefficient in the depth are evaluated, which shows 12.5~15.0mm of deteriorated depth and increased diffusion coefficient by 2.0 times. The proposed technique can be effectively applied to concrete with two different diffusion coefficients considering enhanced or deteriorated surface conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.13-24
• /
• 1993

The influence of the bubble structure and strength characteristics on the freeze-thaw resistance of high strength concrete is investigated by the laboratory experiment. The test conditions are formed in the manner that water is continueusly supplied externally and the specimens were received severe weather actions from ordinary to significantly low temperatures. The experiments are performed in two stages. In the first stage, the relation between the durability to frost action and the bubble structure is analyzed especially with respect to the water-cement ratio and the amount of air. The AE and non-AE concrete specimens made of ordinary portland cement are used in the test. In the second stage, the non-AE concrete specimens using vibratory compaction to improve the durability to frost action, and the high watertight specimens of rapid hardening portland cement to increase their initial strength are produced and tested. The degree of watertightness of the specimens is determined by measuring the permeability of the specimens and the bubble structure of the high watertight concrete is also estimated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1716-1721
• /
• 2006

The present study was conducted to observe the effect of osmolality of glycerolated TEST-yolk glycerol extenders on post-thawing sperm kinematics of ram spermatozoa of the native Malpura breed maintained in a semi-arid tropical environment. Good quality semen obtained from adult rams was pooled, split and diluted to 1,000 million spermatozoa per ml in complete TEST-yolk-glycerol extenders of 900, 1,200, 1,500 and 1,800 mOsm/kg osmolality. Diluted semen samples were loaded in 0.25 ml straws and cooled down to $-125^{\circ}C$ freezing temperature at the rate of $-25^{\circ}C$ per minute under controlled conditions before plunging into liquid nitrogen for storage. The thawing of straws was performed at $50^{\circ}C$ in a water bath for 10 seconds and sperm kinematics of the frozen-thawed spermatozoa were assessed by a computer-assisted sperm analysis technique. Osmolality of diluent had no significant effect on post-thawing % motility, % rapid, % medium and % slow moving frozen-thawed spermatozoa but significantly (p< 0.05) affected the % linearity and % straightness. The post-thawing % motility and % rapid motile spermatozoa were highest in samples extended in diluent of 1,500 mOsm/kg osmolality and lowest in 900 mOsm/kg. The curvilinear velocity of spermatozoa was significantly (p<0.05) higher for samples extended in 1,800 mOsm/kg, compared to those in 900 and 1,200 mOsm/kg, but the effect was not significantly different to those extended in diluent of 1,500 mOsm/kg osmolality. The study indicated that ram spermatozoa could tolerate a wide osmolality range for dilution in the complete TEST-yolk-glycerol extender for their cryosurvival. The highest recovery of motile spermatozoa following thawing was achieved in samples extended in the TEST-yolk-glycerol diluent of 1,500 mOsm/kg osmolality.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.152-159
• /
• 2014

Urea solution as a reductant of SCR has been widely used to reduce NOx emissions from diesel engine. But it has lots of problems which are freezing at low temperature due to liquid state, deposition of solid formation in the exhaust, dosing device, and complex package such as mixers for uniform concentration of ammonia. In order to overcome these obstacle, ammonium carbonate which is one of solid ammonium materials to produce ammonia gas directly by sublimation process is considered. Simple reactor with visible widow was designed to predict equilibrium temperature and pressure of ammonium carbonate. To simulate real operation conditions under automobile environment, several cycles of heating and cooling condition were settled, two different re-solidification materials were extracted from the reactor and visible window. Analytical study is performed to characterize these unknown materials by XRD(X-Ray Diffraction), FT-IR(Fourier Transform Infrared Spectroscopy), and EA(Elemental Analyzer). From analytical results, re-solidification materials from heating and cooling cycles are very similar to original material of ammonium carbonate.

• Journal of Plant Biotechnology
• /
• v.44 no.3
• /
• pp.287-295
• /
• 2017

Water temperature is one of the major factors that impacts the growth and life cycle of Pyropia tenera, one of the most valuable and cultivated marine red algae belonging to Bangiales (Rhodophytes). We analyzed transcriptome from gametophyte of P. tenera under normal and high temperature conditions, and identified four small heat shock proteins (sHSPs). They have no significant amino acid sequence homology with known proteins in public databases except PhsHSP22 from Pyropia haitanensis. PtsHSP19.3 gene responded to high temperature but slightly or not to desiccation, freezing or high salt condition. When the PtsHSP19.3 gene was overexpressed in Chlamydomonas reinhardtii, transformed Chlamydomonas lines revealed much higher growth rate than that of control cells under heat stress condition. Transformed cells also grew well in those of the control cell onto the medium containing high salt or $H_2O_2$. When the PtsHSP19.3 was fused to GFP and introduced into tobacco protoplast, fluorescence was detected at several spots. Results indicate that PtsHSP19.3 may form super-molecular assembles and be involved in tolerance to heat stress.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• Korean Journal of Animal Reproduction
• /
• v.16 no.3
• /
• pp.209-215
• /
• 1992

These studies were carried out to overcome 2-cell block and in vitro development to blastocysts in vitro fertilization of mouse embryos. The unfertilized ova were obtained by superovulation in ICR mice of 4 to 6 weeks old. Tyrode's 280 solution was used as basal media, and the pH range of media examined was designed from 6.5 to 7.5 with 0.2 interval and the range of osmolality from 250 to 370 mOsm with 20 interval, and the period of sperm preincubation examined was 30, 60, 120, and 180 minutes. The ova developed to 2-cell embryos after 26hrs of incubation with preincubated sperm were evaluatated as in vitro fertilized ones. The results obtained were summarized as follows: 1. The optimal ranges of pH and osmolality of culture media and of sperm preincubation time for in vitro development of in vitro fertilized ova to blastocyst were pH 7.1 to 7.3, 250 to 350 mosmol and 60 to 180 min, respectively. 2. With the media of pH 7.1, 310 mOsm and sperm preincubation period of 120min in another experiment of large sample size, the in vitro fertilized ova was found 66.5% and the in vitro development of in vitro fertilized ova to blastocyst was found 35.8%. From the above results it was concluded that the optimal conditions of pH and osmolality of the media for mouse IVF and embryo culture, and the period of sperm preincubation might be 7.1, 310 mOam and 120min, respectively.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.446-456
• /
• 2007

Increased access to broadband networks has led to a fast-growing demand for voice and video over IP(VVoIP) applications such as Internet telephony(VoIP), videoconferencing, and IP television(IPTV). For pro-active troubleshooting of VVoIP performance bottlenecks that manifest to end-users as performance impairments such as video frame freezing and voice dropouts, network operators cannot rely on actual end-users to report their subjective quality of experience(QoE). Hence, automated and objective techniques that provide real-time or online VVoIP QoE estimates are vital. Objective techniques developed to-date estimate VVoIP QoE by performing frame-to-frame peak-signal-to-noise ratio(PSNR) comparisons of the original video sequence and the reconstructed video sequence obtained from the sender-side and receiver-side, respectively. Since processing such video sequences is time consuming and computationally intensive, existing objective techniques cannot provide online VVoIP QoE. In this paper, we present a novel framework that can provide online estimates of VVoIP QoE on network paths without end-user involvement and without requiring any video sequences. The framework features the "GAP-model", which is an offline model of QoE expressed as a function of measurable network factors such as bandwidth, delay, jitter, and loss. Using the GAP-model, our online framework can produce VVoIP QoE estimates in terms of "Good", "Acceptable", or "Poor"(GAP) grades of perceptual quality solely from the online measured network conditions.