• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.633-636
• /
• 2008

Concrete structures are occur many various deteriorations in the course of time and many efforts have progressed to improve on performance of concrete. The purpose of this study is to evaluate the durability of latex modified mortar in order to repair concrete structure which are happened deterioration. In this study, we tested plastic shrinkage, drying shirnkage, repeated freezing and thawing, permeability and resistance of chemical solution. Latex modified mortar and two kinds of sprayed polymer mortar used on durability test. As a result of test, latex modified repair mortar was exhibited durablilty improvement compared to the conventional sprayed polymer mortars. It is judged the fact that latex modified mortar have no problem in site application but additionally many research will be necessary.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1025-1028
• /
• 2008

Using of maintenance system for gate bridge algorism, We made out algorism and engine for prediction of life cycle by neutralization, freezing-thawing and damage from sea wind. To objective of this system, user can use easily with maintenance system for gate bridge. Also, to improve of maintenance efficiency, web-program made out by superannuated evaluation and analysis of field exposure data. To develope web-program, we framing structure design of database, which is adapted to method of maintenance, repair, and reinforcing

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.477-480
• /
• 2008

With an increase of power consumption due to industrial development, the generation of coal ash has been growing tremendously and, accordingly, environmental concern over its disposal and insufficiency in disposal sites have been raised as other issues to be considered. In order to examine the usability of coal ash as an aggregate for concrete, such fundamental information as slump, air contents, mechanical properties and durability of concrete has been secured by way of setting 10, 20 or 30 wt. % of fine aggregate alternative rate of ash and identifying its basic properties at each pond-ash contents. The results of the study indicate that slump and air content heavily depend on the site of generation, and this might greatly influence on the content of fine particles of the ash. It is also shown that its freezing and thawing resistance tends to be relatively lower than that of Plain, which requires comprehensive examination over next few years on the absorptiveness and properties of mixed water of the ash collected from each disposal site.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.2 s.20
• /
• pp.73-79
• /
• 2006

The purpose of this study is to enhance the development of construction waste-recycling technologies and its economical efficiency by developing environment-friendly tetrapod, precast concrete, where recycled aggregate is used in order to promote recycling of waste concrete. The results of concrete mechanic characteristics experiments by the circulation coarse aggregate-replacement ratio are as the following. The circulation aggregate is lower and higher than natural aggregate in specific gravity and absorption ratio, respectively so that in case of mix proportioning, unit volume increases, while unit aggregate amount decreases. From the result, sufficient experiments of physical characteristics of circulation aggregate are required to get proper mix proportioning. When circulation aggregate-replacement ratio increases, compressive strength tends to decrease comprehensively, but 50% of replacement ratio is good enough to use. When circulation coarse aggregate's replacement ratio is 0%, drying shrinkage, which causes cracks in concrete and deteriorates durability, shows the minimum length change and the higher the ratio, the larger the length change. Thus. when using circulation coarse aggregate, drying shrinkage should be fairly examined. In freezing-and-thawing resistance, weight loss tends to comprehensively increase its loss at the circulation aggregate-mixed site. And the examination of surface aggregate-omission ratio is further needed and dynamic elastic modulus and durability factor(DF) require more study as well. In order to use circulation aggregate to tetrapod, a clear standard for strength should be first prepared and at the same time, more study about durability is needed.

• Clinical and Experimental Reproductive Medicine
• /
• v.17 no.2
• /
• pp.167-172
• /
• 1990

This study was carried out to clarify the effects of various kinds of cryoprotectants which were frequently used in freezing embryos of domestic animals on the survival of frozen-thawed mouse embryos. Mouse embryos were collected by hyperstimulation induction of ICR mouse. The samples were slowly cooled ($l^{\circ}C/min$) to temperatures between $-7^{\circ}C$ and $-30^{circ}C$ before direct transfer to liquid nitrogen ($-196^{\circ}C$) and thawed rapidly ($-500^{\circ}C$/min). As cryoprotectants, Glycerol, DMSO, Ethylene glycol and Propylene glycol were used and applied each 2 cell, 8 cell, morula in embryo stage. After normal mouse embryos developed to blastocyst by in vitro culture, we observed recovery rate and developing rate of embryos at thawing. The results obtained in these experiments were as follows : 1. The in vitro development rate from the frozen-thawed 2 cell embryos to the blastocyst were 67.7% in ethylene glycol, 65.7% in Propylene glycol, 55.2% in glycerol and 50.0% in DMSO respectively. 2. The in vitro development rate from the frozen-thawed 8 cell embryos to the blastocyst were 83.6% in DMSO, 75.7% in glycerol, 52.2% in propylene glycol respectively. 3. The in vitro development rate from the frozen-thawed morula to the blastocyst were 84.2% in glycerol, 80.0% in DMSO, 66.6% in propylene glycol and 55.2% in ethylene glycol respectively.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.2
• /
• pp.227-233
• /
• 2007

The purpose of this research was to study the effects of the feeding of dietary citrus byproducts on the physicochemical properties and palatability of Hanwoo rump (HR). The samples for experimental samples consisted of the HR not fed without citrus byproducts pulp (CBP-0) and the HR rump fed with citrus byproducts pulp during the fattening period (CBP-1). The control (CBP-0) HR rump was fed by general practical feeding (roughages and concentrates were fed separately), while the CBP-1 was fed in the same manners as CBP-0 until 17 months but with citrus byproducts then fed fer the next 10 months. There were no significant differences in the $L^*$ (tightness), $a^*$ (redness) and $b^*$ (yellowness) of the HR between the CBP-0 and CBP-1 fed groups. There were no significant differences in the pH, VBN content and EDA between the samples, but the TBARS value of the CBP-1 fed group was lower than that of the CBP-0 fed group (p<0.05). There were no significant differences in the water holding capacity, freezing loss, thawing loss, boiling and roasting logs between the CBP-0 and CBP-1 fed groups. There were no significant differences in the hardness, cohesiveness, chewiness and shear force between the samples, but the springiness of the CBP-1 fed group was higher than that of the CBP-0 fed group (p<0.05). There were no significant differences in the sensory scores for the roasted beef between the CBP-0 and CBP-1 fed groups. There were no significant differences in the taste, flavor, juiciness and palatability of roasted beef the between samples, but the tenderness of the CBP-1 fed group was superior to that of the CBP-0 fed group.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.657-665
• /
• 2020

The objective of this study was to investigate whether supplementation of pentoxifylline (PTX; phosphodiesterase inhibitor) to thawed boar semen improves the post-thaw motility of sperm and affects the efficiency of artificial insemination (AI) and further development. To determine the concentration of PTX for AI, frozen-thawed semen was incubated with 0, 5, 10, and 20 mM PTX in an extender freezing medium, respectively, after thawing. Kinematic properties of sperm were examined with a computer-assisted semen analysis (CASA) system. In addition, viability and mitochondrial activity were also tested by LIVE/DEAD and a MitoTracker kit. There were no significant differences in the kinetic parameters of thawed sperm between control and treatment groups, but overall assessment parameters such as motility and rapid progressive were higher in the 10 mM PTX group. In the viability and mitochondrial assay, there were no significant differences observed in the PTX treatment, compared to the control. For further analysis, artificial inseminations were performed using frozen semen and 10 mM PTX treated cryopreserved semen, respectively. There were no differences in pregnancy rates and fetus weights among the groups until 30 and 40 days, but litter size was reduced and relatively low-birth weight was observed in the PTX group. In summary, our findings suggest that enhancement of in vitro sperm quality or non-toxicity supplemented by PTX may have detrimental effects on fetus development.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.1-8
• /
• 2017

An experimental study is needed a reinforcing method for seismic load to apply for RC structures because a lot of earthquakes have frequently happened in the world and those also collapsed infrastructures or damaged human lives. The reinforcing effect of PolyUrea (PU) appeared to be excellent under blast and impact about RC structures. In this study, Stiff Type PolyUrea (STPU) had developed by manipulating the ratio of the components of prepolymer and hardener of PU. And the durability performance evaluation of STPU for deterioration and chemical resistance has been performed. Acid environmental exposure test and ultraviolet (UV) exposure test have been performed as the durability performance evaluation for STPU. Concrete carbonation exposure test and freezing and thawing test for concrete coated with STPU have been performed. The experimental result showed that STPU has high resisting capacity and durability in all tests. Therefore, STPU would be used as seismic reinforcement materials.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.4
• /
• pp.299-308
• /
• 1996

In order to develop the controlled release of a drug from the suppsitories, in vitro drug release and in vivo absorption in rabbits were investigated. Various suppository forms with hollow cavities, into which drugs in the form of fine powder or solid dispersion system(SDS) could be placed, were utilized. The polyvinyl alcohol(PVA) hydrogel as a base, and propranolol HCl(PPH) as a model drug were employed. In vitro drug dissolution studies showed that the dissolved amounts(%) of PPH from PPH-methylcellulose(MC)-SDS and PPH-ethylcellulose(EC)-SDS reached 100% and 63% in 4.5-hours, respectively. In the relative strength test for PVA hydrogel, PVA hydrogel became harder and more rigid when the number of freezing-thawing cycles and the ratio of PVA 2000 were increased. In vitro drug release profile revealed that the release rate(%) of PPH from PPH-EC-SDS and PPH-MC-SDS hollow type suppositories were sustained. The release amount(%) of PPH from PPH-EC-SDS hollow type suppositories was not affected by storage time, but since the use of hydrophilic MC made PPH diffuse into the hydrogel after it absorbed the water of base, the various release patterns were appeared as the storage time went by. In vivo absorption experiments with rabbits showed that PPH-EC-SDS(PPH : EC=1:3) hollow type suppository delayed the absorption of PPH, significantly. The $C_{max}$, $AUC_{0{\rightarrow}8}$ and MRT of PPH powder hollow type suppository were $196.37{\pm}5.63\;ng/ml$, 1105.26 ng/ml/min and 8.66 min, respectively. The $C_{max}$, $AUC_{0{\rightarrow}8}$ and MRT of PPH-EC-SDS(PPH : EC=1:3) were $91.30{\pm]14.14\;ng/ml$, 554.69 ng/ml/min, 235.99 min, respectively.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.87-92
• /
• 2010

This study evaluates the laboratory properties of asphalt binder and mixture modified with R-EPDM(Recycling Ethylene Propylene Dien Monometer), which consists of R-EPDM as a main ingredient that is an industrial by-product made by manufacturing waste EPDM below 50 mesh as an additive. Superpave system was used to determine the PG(Performane Grade) and evaluate the property of R-EPDM modified binder. OACs(Optimum Asphalt Contents) of R-EPDM modified asphalt mixtures were determined by Superpave mix design using gyratory compactor and wheel tracking test and moisture susceptibility test were carried out with R-EPDM modified asphalt mixtures at OACs. The results from these tests, rutting-resistance and freezing and thawing resistance by moisture susceptibility of R-EPDM modified asphalt mixtures were superior to one of general asphalt mixtures(AP-5).