• 제목/요약/키워드: freeze-drying rate

검색결과 111건 처리시간 0.029초

리그노셀룰로오스 나노피브릴의 분무건조 및 건조물의 특성 (Spray Drying of Lignocellulose Nanofibril (LCNF) and Characterization of Spray-dried LCNF)

  • 박찬우;한송이;이승환
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권3호
    • /
    • pp.288-296
    • /
    • 2017
  • 본 연구에서는 분무건조 조건 및 계면활성제 첨가에 따른 리그노셀룰로오스 나노피브릴(lignocellulose nanofibril, LCNF)의 분무건조 수율 및 건조 LCNF의 형태학적 특성, 치수분포 및 수재분산성을 조사하였다. 원료로는 약 70-300 nm 직경을 지니는 섬유상의 LCNF를 사용하였으며, 분무건조 LCNF는 rod형 파티클의 형태학적 특성을 보였다. $140^{\circ}C$ 온도조건에서의 분무건조 수율이 가장 높았으며, 분무건조 LCNF의 입자크기 또한 가장 작았다. LCNF 현탁액의 농도가 감소할수록 또한 송풍량이 증가할수록 분무건조 수율 및 입자크기가 증가하였다. 또한, 계면활성제의 첨가로 건조 수율을 향상시킬 수 있었으며, 첨가 비율이 증가할수록 평균입자크기가 감소하였다. 건조 LCNF의 입자 크기가 감소할수록, 물에서의 재분산성이 향상되었으며, 수현탁액의 여수시간이 증가하였다.

한천(寒天) 추출물(抽出物)의 건조방법(乾燥方法)에 따른 한천(寒天)의 품질(品質) (Effects of Various Drying Methods of Agar-gel on Dried-agar Quality)

  • 이철;배송환
    • 한국식품과학회지
    • /
    • 제16권1호
    • /
    • pp.78-82
    • /
    • 1984
  • 국내에서 생산되는 한천원조(寒天原藻)를 사용하여 건조방법(乾燥方法)이 한천(寒天)의 품질변화(品質變化)에 미치는 영향을 검토(檢討)하였다. 천일(天日) 건조(乾燥), 태양열(太陽熱) 집열(集熱) 건조(乾燥), 열풍(熱風) 건조(乾燥)($30^{\circ}C$), 대조구, 자연대류), 열풍(熱風) 건조(乾燥)($(30^{\circ}C$, 전처리구, 자연대류) 및 동결(凍結) 건조법(乾燥法)에서, 한천(寒天) 젤($1.0{\times}1.0{\times}34.0cm$)을 수분함량 1000%(D.B)까지 건조(乾燥)시키는 데 걸리는 시간은 96, 75, 67, 50 및 21시간 이었다. 천일(天日) 건조(乾燥), 태양열(太陽熱) 집열(集熱) 건조(乾燥), 동결(凍結) 건조(乾燥) 및 분무(噴霧) 건조법(乾燥法)에 의한 한천(寒天)의 젤리강도는 320, 370, 270 및 $360g/cm^2$로 나타났다. 열풍(熱風) 건조법(乾燥法)에 의한 젤리 강도는 건조온도(乾燥溫度) 한천(寒天) 젤의 전처리 유무(有無) 및 열전달(熱傳達) 형태(形態)에 의해 다르게 나타났으며, 타(他) 건조법(乾燥法)에 비해 비교적 높은 값을 나타냈다. 열풍(熱風) 건조시(乾燥時), 전처리 과정을 거친 한천(寒天) 젤의 건조속도(乾燥速度)가 대조구의 건조속도(乾燥速度) 보다 훨씬 증가하였으며, 한천(寒天) 젤의 건조속도(乾燥速度)의 증가에 따라 한천(寒天)의 젤리강도는 현저하게 증가되었다.

  • PDF

MoO3/camphene 슬러리의 동결건조 및 수소환원에 의한 Mo 다공체 제조 (Fabrication of Porous Mo by Freeze-Drying and Hydrogen Reduction of MoO3/Camphene Slurry)

  • 이원석;오승탁
    • 한국분말재료학회지
    • /
    • 제19권6호
    • /
    • pp.446-450
    • /
    • 2012
  • In order to fabricate the porous Mo with controlled pore characteristics, unique processing by using $MoO_3$ powder as the source and camphene as the sublimable material is introduced. Camphene-based 15 vol% $MoO_3$ slurries, prepared by milling at $50^{\circ}C$ with a small amount of dispersant, were frozen at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $750^{\circ}C$, and sintered at $1000-1100^{\circ}C$ for 1 h. After heat treatment in hydrogen atmosphere, $MoO_3$ powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about $150{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores due to the difference in the camphene growth rate during freezing process. The size of small pores was decreased with increase in sintering temperature, while that of large pores was unchanged. The results are strongly suggested that the porous metal with required pore characteristics can be successfully fabricated by freeze-drying process using metal oxide powders.

동결건조법에 의한 PLZT 세라믹 제조 및 결정립 성자에 관한 연구. (A Study on the Grain Growth and PLZT Ceramics Fabrication by Freeze Drying Method.)

  • 이성갑;류기원;이영희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.492-495
    • /
    • 1987
  • In this study, PLZT ceramics were fabricated by freeze-drying and normal sintering method. The compositional rate of specimen was selected 9/65/35 (La/Zr/Ti) which have good optical and dielectric properties, sintering time was varied 1, 10, 30, 40, 50, 55, 60 and 65 hr at $1250^{\circ}C$. After sintering, the optical and dielectric properties were investigated with the grain size. As the result of the experiment, freeze-dried powder appeared particle size less than 1 um. The relative dielectric constant was increased linearly with the sintering time, specimen which sintered for 65 hr had the highest value, 5780. Grain was grown with increasing time, in the case of specimen sintered for 60 hr, the grain size was 8.4 um. Transmittance was increased with the grain size. In the case of 8.4 um grain size, the transmittance was 56 %. Curie temperature was decreased linearly by the surface-layer effect of space-charge, in the case of grain size which were 1.8 um and 8.4 um, appeared at $100^{\circ}C$ and $80^{\circ}C$, respectively.

  • PDF

Design and Implementation of Wireless Sensor Network for Freeze Dryer

  • Cho, Young Seek;Kwon, Jaerock;Choi, Seyeong
    • Journal of information and communication convergence engineering
    • /
    • 제13권1호
    • /
    • pp.21-26
    • /
    • 2015
  • A wireless sensor network (WSN) is designed and implemented for a freeze dryer. Freeze-drying technology is widely used in the fields of pharmacy and biotechnology as well as the food and agriculture industries. Taking into account the demand for high-resolution pressure and temperature measurements in a freeze dryer, the proposed WSN has a significant advantage of creating a monitoring environment in a freeze dryer. The proposed WSN uses a ZigBee/IEEE 802.15.4 network with an altimeter module that contains a high-resolution pressure and temperature sensor with a serial digital data interface. The ZigBee network is suitable for low-energy and low-data-rate applications in the field of wireless communication. The altimeter module is capable of sensing pressure in the range of 7.5-975 Torr (10-1300 mbar) and temperature in the range of $-40^{\circ}C$ to $125^{\circ}C$ with a DC power consumption of $3{\mu}W$. The implemented WSN is installed in a commercial laboratory freeze dryer in order to demonstrate its functionality and efficiency. A comparison with the temperature profile measured by a thermocouple installed in the freeze dryer reveals that the resolution of the temperature profile measured by WSN is superior to that measured by the thermocouple.

Preparation and Characterization of Quercetin-Loaded Solid Dispersion by Solvent Evaporation and Freeze-Drying Method

  • Park, Sang Hyun;Song, Im-Sook;Choi, Min-Koo
    • Mass Spectrometry Letters
    • /
    • 제7권3호
    • /
    • pp.79-83
    • /
    • 2016
  • We prepared solid dispersion formulations of quercetin to enhance its solubility and dissolution rate. Various quercetin-loaded solid dispersion were tested with quercetin, poloxamer 407, and carrier such as hydroxypropyl methyl cellulose (HPMC), polyethylene glycol 8000 (PEG 8000), and polyvinylpyrrolidone K40 (PVP K40) using solvent evaporation and freeze drying methods in terms of both the aqueous solubility and the dissolution rates of quercetin. The solubility of quercetin as its solid dispersion formulations was markedly improved compared with that of quercetin powder. Especially, highest solubility of quercetin was observed when HPMC was used as a carrier. The cumulative dissolution of quercetin within 360 min from solid dispersion composed of quercetin, poloxamer 407, and HPMC was 8.8-fold higher than the dissolution of pure quercetin. The results of powder X-ray diffraction (XRD) and scanning electron microscope (SEM) indicated that quercetin transformed from a crystalline to an amorphous form through the solid dispersion formulation process. These results suggest that the solid dispersion formulation of quercetin with poloxamer 407 and HPMC could be a promising option for enhancing the solubility and dissolution rate of quercetin.

동결건조공정을 이용한 다공성 세라믹스의 미세구조 제어 (Microstructure Control of Porous Ceramics by Freeze-Drying of Aqueous Slurry)

  • 황해진;문지웅
    • 한국세라믹학회지
    • /
    • 제41권3호
    • /
    • pp.229-234
    • /
    • 2004
  • 수계슬러리의 동결건조 공정을 이용하여 배향성 기공을 갖는 NiO-YSZ 지지체를 제조하였다. 슬러리의 동결과정에서 형성된 얼음 결정은 진공건조 과정을 거치면서 승화되어 그 자리에 기공을 형성하였으며. 열전달 방향과 속도를 조절함으로써 얼음결정의 성장을 제어할 수 있음을 알 수 있었다. 제조된 NiO-YSZ 지지체는 배향성을 가진 거대(macro) 기공과 함께 표면에는 미세기공이 존재하는 독특한 기공구조를 형성하였다. 이것은 동결과정에 있어서 성형체의 위치에 따라 얼음의 성장속도가 다르기 때문에 발생하는 현상으로 생각된다. 얻어진 다공체 표면에 YSZ 슬러리를 dip 코팅하여 막을 형성한 후 140$0^{\circ}C$에서 동시소성(co-firing)하여 다공성 NiO-YSZ 지지체의 표면에 치밀한 YSZ 막이 코팅된 bilayer 제조에 성공하였다.

냉동건조를 이용한 쌀기본 이유식 제조에 있어서 건조조건의 최적화 (Optimization of the Preparation of Rice-based Infant Foods Using Freeze Drying Process)

  • 김광옥;최호정
    • 한국식품과학회지
    • /
    • 제27권5호
    • /
    • pp.680-689
    • /
    • 1995
  • 본 연구는 $4{\sim}6$개월의 유아들을 위하여 재수화시킨 후 숟가락으로 떠먹일 수 있도록 쌀을 기본으로 하고 당근, 쇠고기 및 계란을 각각 주재료로 한 냉동건조 이유식 제조의 최적조건을 결정하기 위하여 수행되었다. 본 연구에서 얻어진 결과를 요약하면 다음과 같다. 당근, 쇠고기 및 계란이유식에서 모두 냉동건조시간은 수분함량이 높고 가열판온도가 낮을수록 증가하였다. 파쇄성은 수분함량이 감소하고 가열판온도가 증가함에 따라 증가하였다. 관능적 특성 중 수화속도, 균질성 및 매끄러운 정도는 수분함량이 증가하고 가열판온도가 감소할수록 증가하였고, 뜨기 쉬운 정도는 수분함량이 증가할수록 증가하였으나, 가열판온도의 영향은 거의 받지 않았다. 또한 피막형성성은 수분함량과 가열판온도가 증가할수록 증가하였다. 이유식 제조의 최적조건은 당근이유식의 경우 수분함량 88.5%와 가열판온도 $34^{\circ}C$로, 쇠고기이유식에서는 수분함량 88.5%와 가열판온도 $28^{\circ}C$로, 그리고 계란이유식에서는 수분함량 87.3%와 가열판온도 $39^{\circ}C$로 결정되었다.

  • PDF

생녹혈의 건조 및 안정화 (Drying and Stabilization of Deer Blood)

  • 안용근
    • 한국식품영양학회지
    • /
    • 제22권1호
    • /
    • pp.20-28
    • /
    • 2009
  • According to traditional oriental medicine, only non-coagulated native deer blood is said to be effective, and coagulated deer blood is ineffective. Thus, a drying and tablet-producing method for deer blood was developed to maintain its physiological and therapeutic activity, and so that after drying, it can be redissolved and protected from coagulation. Proteases such as trypsin, pepsin, chymotrypsin, and aminopeptidase were added to the deer blood indicating that it coagulated in an hour, as shown by the reference. Wax gourd extract, which is high in protease, was added to the blood resulting in anticoagulation for 31 hours. Also, additions of 1% EDTA, 0.38% sodium citrate, 0.16% calcium oxalate, 1.2% ethanol, and 0.006% heparin to the deer blood resulted in anticoagulation for 1 hour, 4 hours, 2 hours, 1 hour, and 31 hours, respectively. In an experiment using 0.19% sodium citrate plus 1% wax gourd extract, and 0.006% heparin plus 1% wax gourd extract, anticoagulation was maintained for up to 72 hours. However, since heparin can not be used in food, the deer blood tablet was made with the addition of 0.19% sodium citrate and 1% wax gourd extract, followed by freeze drying. The dissolution rate for the tablet manufactured in this manner was 96.7%. And the dissolution rates for spray-dried deer blood, vacuum-dried deer blood, and marketed deer blood tablets were 85%, 81%, and 25.5%, respectively. The composition of the tablet produced from the freeze-dried deer blood was 56.4% protein, 18.7% lactose, 1.2% amino acids, 1.0% glucose, 0.7% lipids, 180 mg/100 g of iron, 13 mg/100 g of potassium, 39.1 mg/100 g of calcium, 480 mg/100 g of sodium, 368 mg/100 g of chloride, each.

Effect of Skim Milk-Alginate Beads on Survival Rate of Bifidobacteria

  • Yu, Won-Kyu;Yim, Tae-Bin;Lee, Ki-Yong;Heo, Tae-Ryeon
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제6권2호
    • /
    • pp.133-138
    • /
    • 2001
  • In this study, an attempt was made to increase the survival rate of bifidobacteria entrapped in alginate in the gastrointestinal tract, and to investigate the potential industrial applications, for example lyophilized capsules and yogurt. First, the protective effect of various food additives on bifidobacterial survivability was determined after exposure to simulated gastric juices and bile salts. The additives used in this study were skim milk (SM), polydextrose (PD), soy fiber (SF), yeast extract (YE), chitosan (CS), $\kappa$-carageenan ($\kappa$-C) and whey, which were added at 0.6% concentration (w/v) to 3% alginate-bifidobacterial solution. In the simulated gastric juices and bile salts, the protective effect of 0.6% skim milk-3% alginate (SM-A) beads on the survival rate of bifidobacteria proved to be higher than the other additives. Second, the hydrogen ion permeation was detected through SM-A vessel without bifidobacterial cells at different SM concentrations (0.2%, 0.4%, 0.6%, 0.8%, and 1.0%). There were no differences in terms of the pH decrease in SM-A vessels at 0.6%, 0.8%, and 1.0% (w/v) SM concentrations. The survival rate of bifidobacteria in SM-A beads would appear to be related to the SM buffering capacity against hydrogen ions and its tendency to reduce the pore size of bead. In this experiment, the survival rate of bifidobacteria entrapped in beads containing 0.6% SM showed the highest viability after exposure to simulated gastric juices for 3h, thereby indicating that 0.6% SM is the optimum concentration fir 3% alginate bead preparation. Third, the effect of SM-A beads on the freeze-drying and yogurt storage for 10 days was investigated. SM-A beads were found to be more efficient for freeze drying and yogurt storage than untrapped cells and the alginate bead. Consequently, the survival rate of bifidobacteria entrapped in SM-A beads was increased in simulated gastric juices, bile salts and probiotic products, such as lyophilized capsules and yogurt, SM-A beads can be expected to produce high value probiotic products.

  • PDF