• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.63-70
• /
• 2014

Automatic milking systems (AMS) have been increasingly introduced to Korean dairy farms. However, in comparison with conventional milking systems (CMS), some negative changes in milk quality are being observed. The use of AMS leads to an increase in milking frequency, which in turn might result in higher physical stress on the milk, possibly causing changes in the milk fat globule (MFG) membrane. Therefore, the purpose of this study was to examine the effect of the different milking systems on the milk quality, with a focus on milk fat properties. At the same time, we studied the effect of feeding the dairy cows with protected fat. Raw milk samples were taken monthly from individual cows as well as from bulk tanks at four AMS and four CMS dairy farms. We measured quality-related parameters such as MFG size distribution, free fatty acid content and composition, and acid values. Although most results showed no significant differences with regard to the milking system, we found a relatively high positive correlation between MFG size and milk fat content. Moreover, larger MFG size was observed in the milk when cows had been fed protected fat. The significantly higher (P< 0.05) free fatty acid content of milk observed under this experimental condition could be attributed to higher milking frequency as a result of using AMS.

• Advances in nano research
• /
• v.12 no.5
• /
• pp.467-482
• /
• 2022

In the current work, static and free torsional vibration of functionally graded (FG) nanorods are investigated using Fourier sine series. The boundary conditions are described by the two elastic torsional springs at the ends. The distribution of functionally graded material is considered using a power-law rule. The systems of equations of the mechanical response of nanorods subjected to deformable boundary conditions are achieved by using the modified couple stress theory (MCST) and taking the effects of torsional springs into account. The idea of the study is to construct an eigen value problem involving the torsional spring parameters with small scale parameter and functionally graded index. This article investigates the size dependent free torsional vibration based on the MCST of functionally graded nano/micro rods with deformable boundary conditions using a Fourier sine series solution for the first time. The eigen value problem is constructed using the Stokes' transform to deformable boundary conditions and also the convergence and accuracy of the present methodology are discussed in various numerical examples. The small size coefficient influence on the free torsional vibration characteristics is studied from the point of different parameters for both deformable and rigid boundary conditions. It shows that the torsional vibrational response of functionally graded nanorods are effected by geometry, small size effects, boundary conditions and material composition. Furthermore, for all deformable boundary conditions in the event of nano-sized FG nanorods, the incrementing of the small size parameters leads to increas the torsional frequencies.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.175-182
• /
• 1999

The ocean wave is hydrodynamically investigated to get more reliable solution. To improve the computational accuracy more fine grids are used with relatively less computer storage on the free surface. One element of the free surface is discretized into more fine grids because the free-surface waves are much affected by the grid size in the finite difference scheme. Here the multi-grid method is applied to confirm the efficiency for the S103 ship model by solving the Navier-Stokes equation for the turbulent flows. According to the computational result approximately 30% can be improved in the free surface generation, Finally the limiting streamlines show numerical result is similar to the experiment by twin tuft.

• Journal of Trauma and Injury
• /
• v.31 no.2
• /
• pp.91-95
• /
• 2018

Managing large infected midline abdominal defects are clinically challenging and technically demanding. The alloplastic materials, regional flaps, and component separation are usually infeasible because of the size, location, depth, and state of the defects. In these cases, the free flap is the only option with a large well-vascularized tissue that is free to inset regardless of the location. Herein, we report a case of 44-year-old man with a large infected midline abdominal wall defect who was completely treated with a latissimus dorsi myocutaeous free flap followed by negative pressure wound therapy.

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.728-733
• /
• 2006

The equilibrium or growth shape of ceramic materials is classified largely into two categories according to the thermodynamic conditions imposed. One is a polyhedral shape where the surface free energy is anisotropic, and the other a spherical shape where the surface free energy is isotropic. In the case of grains with a polyhedral shape of anisotropic surface free energy, socalled abnormal grain growth usually takes place due to a significant energy barrier for a growth unit to be attached to the crystal surface. In the case of grains with a spherical shape of isotropic surface free energy, however, normal grain growth with a uniform size distribution takes place. In this contribution, the state-of-the-art of our current understanding of the relationship between the crystal shape and the microstructure evolution during the sintering of ceramic materials in the presence of a liquid phase was discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.71-72
• /
• 2022

In the case of free-form buildings, it is difficult to reuse the form for panel production because the shape and size of the interior and exterior panels of the building are different. In general, it is a free-form concrete panel (FCP) production technology using the existing plywood formwork, and the form is produced in a different shape each time and is discarded after only one use. The production of these disposable forms requires enormous resources, including materials, labor and time. Hence, it is necessary to develop innovative forms that can be reused for sustainable FCP construction. In this study, a technology has been developed that combines 3D Plastering Technique (3DPT) to produce FCP. By applying this technology to free-form building projects, the time and cost required for FCP production can be reduced. However, specific studies on the production process for this technology have not been done yet. Therefore, the objective of this study is a basic study of free-form concrete panel production process using 3D plastering technique.

• Communications for Statistical Applications and Methods
• /
• v.23 no.6
• /
• pp.587-592
• /
• 2016

It is a long-standing issue to correctly determine the number of long-run relationships among time series processes. We revisit nonparametric test for cointegration rank and propose bootstrap refinements. Consistent with model-free nature of the tests, we make use of Cholesky factor bootstrap methods, which require weak conditions for data generating processes. Simulation studies show that the original Breitung's test have difficulty in obtaining the correct size due to dependence in cointegrated errors. Our proposed bootstrapped tests considerably mitigate size distortions and represent a complementary approach to other bootstrap refinements, including sieve methods.

• The Journal of the Korean bone and joint tumor society
• /
• v.14 no.2
• /
• pp.119-124
• /
• 2008

Purpose: To present our experience with soft tissue reconstruction using anterolateral thigh free flap after resection of soft tissue sarcoma. Materials and Methods: Between January of 2003 and June of 2007, we treated 7 patients with soft tissue reconstruction using anterolateral thigh free flap after wide resection for soft tissue sarcoma. We retrospectively analyzed type and size of tumors, resection margin, size of defect after resection, time of operation, flap survival and complication. Results: The type of sarcoma was 3 synovial sarcoma, 2 malignant fibrous histiocytoma, 1 leimyosarcoma and 1 fibrosarcoma. The size of tumor varied from $3{\times}5\;cm$ to $7{\times}8\;cm$. The resection margins of tumors were negative in all cases. The size of soft tissue defect after resection varied from $6{\times}8\;cm$ to $15{\times}10\;cm$. The mean time of operation was 3.6 hours. All flaps were survived. Conclusion: Anterolateral thigh free flap appear to be ideal for reconstruction after wide resection of soft tissue sarcoma.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.510-521
• /
• 2020

Recently, transparency in accounting for medical institutions has been emphasized. However, due to the current system problems and structural limitations, there is a lack of diagnosis on the financial status of domestic hospitals. This study is based on the financial statements per 100 beds of 374 including domestic hospital level to tertiary hospital, and analyzed the Free Cash Flow(FCF) by hospital size from the perspective of Free Cash Flow Hypothesis. After deriving Operating Cash Flow(OCF) through the profit or loss statement of medical institutions, FCFs were analyzed through the prior and current financial statements and OCFs, and the correlation between financial variables was confirmed. According to the analysis, first, hospitals with 160 to 299 beds and 300 beds or more have relatively high FCFs. Second, certified tertiary hospitals, hospitals with less than 160 beds, and general hospitals have negative(-) FCFs. Thus, there's a need to narrow the FCF gap based on the size of the hospital, maintaining an appropriate level of FCF. This study is meaningful in that it was the first FCF analysis based on hospital size. This study is also expected to offer an informative resources in setting differentiated strategies according to the size of medical institutions when establishing new accounting policies in the future.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.287-291
• /
• 2005

To determine the appropriate session for changing treatment modality according to the size of proximal ureter stone with complete obstruction, We analyzed 201 patients with proximal ureter stone primarily treated by Dornier MPL 9000 lithotripter from January, 2002 to August, 2004. Of total 201 patients, the patients without complete obstruction were 142, and with complete obstruction were 59. In the patients without complete obstruction, the accumulative stone free rate of the first, second, and third session were 68.3%, 86.6%, and 94.4%, respectively. The accumulative stone free rate according to the stone size at third session were 100%, 90.5%, 00.0% in stones less than 10 mm, 10 to less than 20 mm, and larger than or 20 mm, respectively. In the patients with complete obstruction, the accumulative stone free rate of the first, second, and third session were 44.1%, 66.1%, and 76.3%, respectively. The accumulative stone free rate according to the stone size at third session were 100%, 65.5%, 33.3% in stones less than 10 mm, 10 to less than 20 mm, and larger than or 20 mm, respectively. In our study, the size of proximal ureter stone with complete obstruction influenced noticeably on the success rate of extracorporeal shock wave lithotripsy (ESWL). We propose that the proximal ureter stones larger than or 10 mm with complete obstruction are treated by ureteroscopic manipulation than ESWL as the first line treatment modality.