• Elastomers and Composites
• /
• 제39권4호
• /
• pp.281-285
• /
• 2004

이 연구는 열분석법을 이용하여 간단하게 자유 라디칼 중합의 활성화 에너지를 결정하는 방법을 부틸 아크릴레이트을 모델로 하여 구했다. 활성화 에너지는 Kissinger, Osawa 및 half-width법인 다수의 주사 속도법 (multiple scanning-rate method)을 이용하여 $1^{\circ}C/min,\;2^{\circ}C/min,\;5^{\circ}C/min$, 그리고 $10^{\circ}C/min$로 측정하였으며 단수 주사 속도법인 Barret 법을 이용하여 구하였다. 열분석법에 의해 구해진 중합반응의 활성화 에너지는 개시반응, 성장반응 및 종결반응의 각각의 활성화 에너지에서 계산된 전체 중합반응에서의 활성화 에너지와 가깝게 접근하였다.

• Bulletin of the Korean Chemical Society
• /
• 제22권1호
• /
• pp.110-112
• /
• 2001

• Macromolecular Research
• /
• 제15권4호
• /
• pp.324-329
• /
• 2007

An octa-functional alkoxyamine initiator, with the 2,2,6,6-tetramethyl-l-piperidinyloxy (TEMPO) free radical, was synthesized based on resorcinarene, with its efficiency to initiate the nitroxide-mediated free radical copolymerization of styrene and methyl methacrylate (MMA) described. A difunctional analogue of this initiator was also synthesized, using resorcinol as the core molecule. The structures of the resulting initiators were confirmed by homolysis studies based on electron spin resonance spectroscopy and molecular modeling. The polymerization behavior and characteristics of the polymers obtained using these two initiators were also compared. Well-defined star-shaped and linear random copolymers, with low polydispersities and controlled molecular weights, were prepared. The efficiencies of these initiators towards copolymerization, as well as the parameters permitting the formation of well-defined polymers, were also investigated. The reactivity ratios were $r_a=0.42(a=styrene)\;and\;r_b=0.33(b=MMA)$ for the octa-functional initiator system and $r_a=0.45\;and\;r_b=0.39$ for the difunctional initiator system.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.769-771
• /
• 2001

• Composites Research
• /
• 제32권3호
• /
• pp.163-169
• /
• 2019

본 연구에서 우리는 자유 라디칼 중합에 기반한 열가소성 고분자의 동적 분자동역학 중합 알고리즘을 이용하여 95%의 변환률을 갖는 PMMA의 고분자 모델을 구성하였다. 본 알고리즘에서는 계산 수행에 필요한 시간을 줄이기 위해 PCFF 포텐셜 함수의 결합 항들 TraPPE-UA 포텐셜 함수의 비결합 항을 조합한 united-atom level의 coarse-grained 포텐셜 함수를 도입하였다. 자유 라디칼 중합 시뮬레이션을 통해 생성된 각 사슬을 분석하여 고분자의 분자량 분포와 평균 분자량을 계산하였고, 고분자의 분자량은 초기 상태에 존재하는 개시제 라디칼의 수를 이용하여 조절하였으며, 유리전이온도, 기계적 물성에 미치는 분자량의 효과에 대해 연구되었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.321-321
• /
• 2006

Aromatic diacetylenes form stable oligomeric diradicals when irradiated with UV light or heated at temperatures above their melting points. In this paper, the formation of stable diradicals is discussed, and the mechanism of polymerization in the presence of peroxide in solution, is discussed. The diphenyldiacetylene undergoes polymerization through coupling of diradicals, and not by the successive addition of radical species.

• Elastomers and Composites
• /
• 제40권1호
• /
• pp.53-58
• /
• 2005

사염화탄소는 C-Cl결합이 끊어진 후에 생성되는 삼염화탄소 라디칼의 공명 안정성에 의해 매우 반응성이 높은 사슬이동제로 알려져 있으며, 본 논문은 벤질 라디칼과 삼염화탄소 라디칼의 안정성을 비교연구하였다. 큐밀클로라이드는 C-Cl결합이 끊어진 후에 벤질 라디칼을 생성하므로 이 연구에 적합한 구조이다. 큐밀클로라이드와 사염화탄소의 반응성은 스티렌을 단량체로 한 자유라디칼 중합을 통해 계산된 사슬 이동 상수로 비교하였다. 실험 결과에 따르면 큐밀클로라이드는 사염화탄소보다 더 반응성이 높았다. 계산된 큐밀클로라이드의 스티렌에 대한 사슬이동상수 값이 약 0.0463으로 0.0011인 사염화탄소 보다 훨씬 높았다. 이 결과는 벤질 라디칼이 삼염화탄소 라디칼보다 훨씬 높은 안정성을 보여주기 때문인 것으로 추정된다. 큐밀클로라이드의 사슬이동상수의 유효성을 조사하기 위하여 Monte Carlo 모의 실험방법을 사용하였다.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.187-193
• /
• 2005

The TEMPO-mediated living free-radical bulk and dispersion polymerization of styrene in the presence of camphorsulfonic acid (CSA) are investigated. In the absence of TEMPO and CSA in the bulk polymerization, a conversion of $93\%$ is achieved within 6 hr of polymerization. When only TEMPO is involved in this polymerization, the pseudo-living free-radical polymerization is well achieved, however, the polymerization rate becomes quite slow. This retardation of the polymerization rate is solved by the addition of a low concentration of CSA. In the TEMPO-mediated dispersion polymerization in the presence of CSA, similar trends in the conversion, kinetics, and PDI are observed as those observed in the case of bulk polymerization. When only TEMPO is used in the dispersion polymerization, the resulting particle size becomes quite broad, due to the prolonged polymerization time. However, when a 1.0 molar ratio of CSA to TEMPO is added to the TEMPO-mediated dispersion polymerization, fairly mono-disperse PS microspheres having an average size of 5.83 $\mu$m and a CV of 3.4$\%$ are successfully obtained, due to the narrow molecular weight distribution of the intermediate oligomers and shortening of the polymerization time. This result indicates that the addition of CSA to the TEMPO-mediated bulk and the use of dispersion polymerization not only shortens the polymerization time, but also greatly improves the uniformity of the microspheres.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.229-235
• /
• 2005

Various alkoxyamine initiators for nitroxide mediated radical polymerization (NMRP) were prepared in high yields by a simple substitution reaction of nitroxide anions with benzyl bromide. The required nitroxide anions were easily generated by treating either nitroxide free radicals or hydroxy amine with an alkali metal such as sodium or potassium in THF. This method is both practical and efficient, since the ionic conditions prevent other side reactions from occurring, such as the self-coupling or oligomerization reactions that are observed in the case of radical trapping conditions. To demonstrate the utility of the resulting alkoxyamine initiators, end- and telechelic-alkoxyamine PEG macroinitiators derived from the alkoxyamines were synthesized by a simple chemical modification, and used for the preparation of PEG-b-PS and PS-b-PEG-b-PS block copolymers by NMRP.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.36-41
• /
• 1993

The adiabatic slirn-type autoclave reactor for free radical polymerization of LDPE is represented by a two-compartment four-cell model, which is proven effective to predict the reactor behavior as well as the polymer properties. Since the temperature distribution along the reactor axis plays the central role for the properties of the polymer product, it is important in practice to regulate the temperature in each compartment. The present study aims for the application of the adaptive control algorithm not only in the period of start-up but also during the steady state operation. It is shown that the temperature control is significantly improved over the conventional PID-control and this also brings about a reduction of variations in the polymer properties. This study demonstrates the potential application of the adaptive controller for the control of the polymerization reactor operated under the adiabatic condition.