• Journal of the Korean Wood Science and Technology
• /
• 제31권1호
• /
• pp.61-70
• /
• 2003

원심법을 이용하여 침엽수 생재 심재부의 조재와 만재에 대한 수분이동경로의 크기를 평가하였다. 또한, 원심처리 후의 포수율 분포와 수분포텐셜의 관계로부터 액체투과성을 측정하였다. 삼나무의 경우, 조재는 0.70 ㎛, 만재는 0.50 ㎛의 반경에서 뚜렷한 피크가 관찰되었다. 솔송나무는 조재와 만재 모두 0.50 ㎛의 반경에서 피크를 나타냈다. 일본전나무와 일본잎갈나무는 조재 0.70 ㎛, 만재 0.30 ㎛의 반경범위에서 피크 값이 관찰되었다. 반면에, 미송과 시트카스푸르수는 뚜렷한 피크 값을 보이지 않았다. 액체투과성은 미송을 제외한 모든 수종에서 조재가 만재보다 좋게 평가되었다.

• 한국방재학회 논문집
• /
• 제11권1호
• /
• pp.1-6
• /
• 2011

고강도 콘크리트의 폭렬현상을 억제하여 내화 성능을 개선하기 위한 방법으로 고온에서 수증기가 콘크리트 표면으로 이동할 수 있도록 경로를 제공하여 주는 섬유를 혼입하는 방안이 있다. 섬유를 혼입하여 콘크리트의 폭렬을 억제하는 방법은 고온에 의해 콘크리트 내부에서 용융되는 섬유에 의해 만들어지는 통로가 서로 연결되어 고압의 수증기를 콘크리트 외부로 이동시킬 수 있을 때 효과가 있다. 수증기가 배출될 통로를 형성하는 섬유의 연결성에 대한 percolation 이론을 섬유혼입 고강도 콘크리트의 내화실험 결과에 적용하였다. 본 연구에서는 percolation 이론과 섬유혼입 고강도 콘크리트의 폭렬 발생의 연관성을 분석하였고, 섬유혼입 고강도 콘크리트 가상 시편을 이용하여 내부 섬유 입자가 서로 연결되어 있는 것을 입체적으로 구현하고 일정 부피비의 섬유가 혼입되었을 때 수증기 배출 통로가 확보되는 것을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.