• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.629-629
• /
• 2013

Graphene is a carbon based material and it has intriguing features, such as phenomenally strong, thin, flexible, transparent and conductive, those make it attractive for a broad range of applications.Unfortunately, graphene is extremely sensitive to contamination. When we fabricate graphene devices, electrical properties of graphene are altered [1], and the charge carrier mobility drops accordingly by orders of magnitude. This significant impact on electron mobility occurs because any surrounding medium could act as a dominant source of extrinsic scattering, which effectively reduces the mean free path of carriers [2,3]. The dominant contaminant is generated through fabrication stage by polymethyl methacrylate (PMMA) [4], or photo resist (PR). Surface contamination by these residues has long been a critical problem in probing graphene's intrinsic properties. If we clearly solve this problem, we can get highly performed graphene devices. Here, we will report on graphene cleaning process by Induced Coupled Plasma (ICP). We demonstrated how much decomposition of residue impact on improving electrical properties of graphene.

• Microbiology and Biotechnology Letters
• /
• v.23 no.1
• /
• pp.60-67
• /
• 1995

Methanol assimilating yeast, Hansenula sp. MS-364 that has high productivity with methanol as carbon and energy source has been preserved at dept. of Microbiological engineering. Purification and properties of alcohol oxidase (E.C.1.1.3.13: oxygen oxidoreductase) were investigated in the methanol assimilating yeast, Hansenula sp. MS-364. Alcohol oxidase is related to the catalytic reaction that degrades alcohol to aldehyde and peroxide. The methanol oxidizing enzyme was purified by ammonium sulfate precipitation, DEAE-Sephadex A-50 chromatography and gel filtration on Sepharose 6B from cell-free extract. The purified enzyme preparation gave a single band in the sodium dodesyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The molecular weight of the enzyme was calculated to be about 576,000 and molecular weight of subunit was also calculated to be 72,000. The optimal pH and temperature of the enzyme reaction were pH 7.5 and 37$\circ$C, respectively. The enzyme was unstable in acidic pH and higher temperature. The enzyme was not specific for methanol and also oxidized lower primary alcohols. The Km value for methanol was 2.5 mM and that for ethanol was 1.66 mM. The enzyme was heavily inhibited by metal ions such as Hg$^{2+}$, Ag$^{2+}$, Cu$^{2+}$. The high concentration of EDTA and sulfhydryl reagents strongly inhibited the enzyme activity. The component of coenzyme was determined to flavin adenine dinucleotide.

• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.699-703
• /
• 1992

An oriental drug, named NP-S, traditionally used as a therapeutic agent for hepatitis B was characterized by separating into volatile and non-volatile fractions. The volatile fraction contained ammonia as determined by ammonia kit and eight peaks when it was analyzed by gas chromatography that are not identified yet. The elemental analysis showed that the non-volatile fraction contained 15.5% carbon, 4.8% hydrogen, 11% nitrogen, and 10% sulfur along with a few trace elements such as Cl, Si, Mg and Zn. NP-S contained 6.7% peptide, 0.3% free amino acids such as Lys, Pro, Arg, lie, Tyr, Phe, His, Thr and Ser and 0.1% inorganic phosphate. The drug showed antimicrobial activity against Salmonella typhimurium, StaPhylococcus aureus and Candida albieans and also had antioxidant activity when thiobarbituric acid reacting substances(TBARS) method was applied.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.215-221
• /
• 2017

An electromagnetic (EM) wave absorber reduces the possibility of radar detection by minimizing the radar cross section (RCS) of structures. In this study, a radar absorbing structure (RAS) was applied to the leading edge of a blended wing body aircraft to reduce RCS in X-band (8.2~12.4GHz) radar. The RAS was composed of a periodic pattern resistive sheet with conductive lossy material and glass-fiber/epoxy composite as a spacer. The applied RAS is a multifunctional composite structure which has both electromagnetic (EM) wave absorbing ability and load-bearing ability. A two dimensional unit absorber was designed first in a flat-plate shape, and then the fabricated leading edge structure incorporating the above RAS was investigated, using simulated and free-space measured reflection loss data from the flat-plate absorber. The leading edge was implemented on the aircraft, and its RCS was measured with respect to various azimuth angles in both polarizations (VV and HH). The RCS reduction effect of the RAS was evaluated in comparison with a leading edge of carbon fabric reinforced plastics (CFRP). The designed leading edge structure was examined through static structural analysis for various aircraft load cases to check structural integrity in terms of margin of safety. The mechanical and structural characteristics of CFRP, RAS and CFRP with RAM structures were also discussed in terms of their weight.

• Journal of Powder Materials
• /
• v.11 no.4
• /
• pp.322-327
• /
• 2004

Ultrafine titanium carbide particles were synthesized by the reaction of liquid-magnesium and vaporized TiCl$_{4}$+C$_{x}$Cl$_{4}$(x = 1 and 2) solution. Fine titanium carbide particles with about 50 nm were successfully produced by combining Ti and C atoms released by chloride reduction of magnesium, and vacuum was then used to remove the residual phases of MgCl$_{2}$ and excess Mg. Small amounts of impurities such as O, Fe, Mg and Cl were detected in the product, but such problem can be solved by more precise process control. The lattice parameter of the product was 0.43267 nm, near the standard value. With respect to the reaction kinetics, the activation energy for the reactions of TiCl$_{4}$+C$_{2}$Cl$_{4}$and Mg was found to 69 kJ/mole, which was about half value against the use of TiCl$_{4}$+CCl$_{4}$, and such higher reactivity of the former contributed to increase the stoichiometry until the level of TiC$_{0.96}$ and decrease the free carbon content below 0.3 wt.%.

• YAKHAK HOEJI
• /
• v.40 no.4
• /
• pp.422-427
• /
• 1996

The anti-Ex-A IgG was specifically labeled with stable isotopes, DL-His-2,4-$d_2$, L-Phe-$d_5$, L-Trp-$d_5$, L-Tyr-2,6-$d_2$ and L-[1-$^{13}C$]Trp, by growing hybridoma cell in serum-free medium. By use of NMR spectroscopy with selectively labeled Fab fragment, we applied a paratope mapping on antigen-antibody complex. Assignments of the observed carbonyl carbon resonances have been determined by using $^{13}C$-$^{15}N$ double labeling method in order to assign the Trp resonances. Photo CIDNP was also applied to investigate the antigen-binding site(s) on the surface residues of antibody. We found that Trp 36, which is located at the $V_H$ domain, is an important residue to bind to Ex-A, however, two Tyr on the surface of anti-Ex-A IgG plays no crucial role to bind to antigen. On the basis of these results, we demonstrate that stable isotope-aided NMR strategy can be extended to molecular structural analyses of the complex of an Fab fragment and a protein antigen.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.8-15
• /
• 2012

Silicon-based thin film was prepared at room temperature by an electrochemical deposition method and a feasibility study was conducted for its use as an anode material in a rechargeable lithium battery. The growth of the electrodeposits was mainly concentrated on the surface defects of the Cu substrate while that growth was trivial on the defect-free surface region. Intentional formation of random defects on the substrate by chemical etching led to uniform formation of deposits throughout the surface. The morphology of the electrodeposits reflected first the roughened surface of the substrate, but it became flattened as the deposition time increased, due primarily to the concentration of reduction current on the convex region of the deposits. The electrodeposits proved to be amorphous and to contain chlorine and carbon, together with silicon, indicating that the electrolyte is captured in the deposits during the fabrication process. The silicon in the deposits readily reacted with lithium, but thick deposits resulted in significant reaction overvoltage. The charge efficiency of oxidation (lithiation) to reduction (delithiation) was higher in the relatively thick deposit. This abnormal behavior needs to clarified in view of the thickness dependence of the internal residual stress and the relaxation tendency of the reaction-induced stress due to the porous structure of the deposits and the deposit components other than silicon.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.647-653
• /
• 2020

Stainless steel is used commonly in nuclear applications for shielding radiation, so in this study, three different types of new stainless steel samples were designed and developed. New stainless steel compound ratios were determined by using Monte Carlo Simulation program Geant 4 code. In the sample production, iron (Fe), nickel (Ni), chromium (Cr), silicium (Si), sulphur (S), carbon (C), molybdenum (Mo), manganese (Mn), wolfram (W), rhenium (Re), titanium (Ti) and vanadium (V), powder materials were used with powder metallurgy method. Total macroscopic cross sections, mean free path and transmission number were calculated for the fast neutron radiation shielding by using (Geant 4) code. In addition to neutron shielding, the gamma absorption parameters such as mass attenuation coefficients (MACs) and half value layer (HVL) were calculated using Win-XCOM software. Sulfuric acid abrasion and compressive strength tests were carried out and all samples showed good resistance to acid wear and pressure force. The neutron equivalent dose was measured using an average 4.5 MeV energy fast neutron source. Results were compared to 316LN type stainless steel, which commonly used in shielding radiation. New stainless steel samples were found to absorb neutron better than 316LN stainless steel at both low and high temperatures.

• Journal of Chest Surgery
• /
• v.33 no.1
• /
• pp.45-50
• /
• 2000

Background: The CarboMedics prosthetic heart valve was produced in an attempt to improve the existing valve designs and was especially concerned with easily the implantation and further reduction of turbulence. Precise positioning of the valve in situ was achieved by the abilityof the valve to rotate relative to the sewing ring. Improved monitoring is possible due to increased radiopacity and the dacron sewing ring is coated with carbon to reduce pannus overgrowth. The leaflets have an opening angle of 78 degrees that apparently allows a rapid synchronous closure The aim of this study was to analyze the clinical performance of the CarboMedics valve prostheses(45 mitral 13 aortic and 7 double aortic-mitral valve replacement) were implanted in 65 patients(mean age 48.75$\pm$9.74 years) Result: The operative mortality was 3.1%(2/65) causes of death were low cardiac output syndrome. Total follow up was 1831 patient-months and mean follow up was 29.06$\pm$10.97 months/patient. No structural failure hemorrhage valve thrombosis and late death have been observed. Embolism occurred at a rate of 0.65%/Patient-year. Actuarial survival and thrombo-mbolism free rate at 36 months were 96.9% and 98.4% respectively. Consclusions: The CarboMedics valve stands for low valve related complicatons.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.423-424
• /
• 2009

The use of fly-ash has been being increased to prevent alkali-aggregate reaction in concrete and to reuse industrial by-product. However the absorption of unburnt carbon to cement particles due to the increase of fly-ash usage decreases air content result in the risk at durability due to free-thawing. The properties of entrained air in fresh concrete, with various fly-ash replacement ratios and different types of air entraining agents, have been analyzed to suggest basic data for the stable air entraining property with large amount of fly-ash replacement in concrete.