• Korean Journal of Microbiology
• /
• v.32 no.2
• /
• pp.97-101
• /
• 1994

Fifteen strains of the nitrogen fixer Axospirillum were isolated from the rhizosphere of rice collected from Kyonggi-do and Chungcheongnam in Korea. They had strong acetylene-reducing activity of 400 of 900 nmol $C_2H_4$ per hour vial had a similar morphology in succinate-malate medium: vibrioid cells having a diameter of 1.0 ${\mu}m$ and a monopolar single flagellum in liquid media. According to their physiological and morphological characteristics, they were divided into two distinct groups, group I and group II. Group I strain were, unlike group II, distinguished by their ability to use glucose as a sole carbon source in nitrogen-free medium, requirement for biotin, and formation of wider, longer, and S-shaped cells in semisolid nitrogen-free malate medium. On the basis of their characteristics, strains belonging to group I were identified as Azospirillum lipoferum, while those belonging to group II were identified as Azospirillum brasilense.

• Korean Journal of Materials Research
• /
• v.22 no.7
• /
• pp.368-373
• /
• 2012

Glasses were prepared with compositions of $(13-x)BaO-80B2_O_3-7Li_2O{\cdot}xSm_2O_3$, BBLSx(x=0.5, 0.4, 0.3) by melting the starting materials of boron oxide(99.9%), lithium oxide(99.9%), barium carbon oxide(99.9%), and samarium oxide(99.9%) and then quenching the melt at $1350^{\circ}C$. This led to good-quality BBLSx(x=0.4, 0.3) and poor-quality BBLSx(x=0.5) glasses. The physical and structural properties of the BBLSx glasses were studied by means x-ray diffraction, scanning electron microscopy(SEM), differential scanning calorimetry(DSC), and dielectric spectroscopy. From the x-ray diffraction and SEM results, the quality of the BBLSx glasses significantly depends on the $Sm_2O_3$ concentration. The x-ray diffraction pattern showed that the crystallites in the BBLSx glasses after heat treatment at $700^{\circ}C$ may be $LiBaB_9O_{15}$. From the DSC results, the glass transition temperatures($T_g$), crystallization temperatures($T_c$), and the maximum temperatures of the crystallized($T_p$) BBLSx glasses all changed with the $Sm_2O_3$ concentration. According to the dielectric spectroscopy results, the values of the real dielectric constant and Tan ${\delta}$ of the BBLSx glasses depended on the $Sm_2O_3$ concentration. The values of the real dielectric constant and Tan ${\delta}$ were also shown to depend on the measuring temperature, possibly due to the ion migration in the bulk of the BBLSx glasses.

• Korean Journal of Materials Research
• /
• v.19 no.7
• /
• pp.369-375
• /
• 2009

The spot weldability of dissimilar metal joints between stainless steels (AISI316) and interstitial free (IF) steels were investigated. This study was aimed to determine the spot welding parameters for a dissimilar metal joint and to evaluate the dissimilar metal joint's weldability, including its welding nugget shape, tensileshear strength, hardness, and microstructure. The fracture surface was investigated by using a Scanning Electron Microscopy (SEM). The experimental results showed that the shape of nugget was asymmetric, in which the fusion zone of the STS316 sheet was larger due to the higher bulk-resistance. The microstructure of the fusion zone was fully martensite. In order to evaluate the microstructure further, dilution of stainless steels were calculated and imposed onto the Schaeffler diagram. The predicted microstructure from the Schaeffler diagram was martensite. In order to confirm the predicted microstructure, XRD measurements were carried out. The results showed that that initial weld nugget was composed of austenite and martensite.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.4
• /
• pp.453-461
• /
• 2022

A chemically sintered and binder-free paste of TiO₂ nanoparticles (NPs) was prepared using a binary-liquid mixture of 1-octanol and CCl₄. The 1:1 (v/v) complex of CCl₄ and 1-octanol easily interacted chemically with the TiO₂ NPs and induced the formation of a highly viscous paste. The as-prepared binary-liquid paste (P_BL)-based TiO₂ film exhibited the complete removal of the binary-liquid and residuals with the subsequent low-temperature sintering (~150℃) and UV-O₃ treatment. This facilitated the fabrication of TiO₂ photoanodes for flexible dye-sensitized solar cells (f-DSSCs). For comparison purposes, pure 1-octanol-based TiO₂ paste (P_O) with moderate viscosity was prepared. The P_BL-based TiO₂ film exhibited strong adhesion and high mechanical stability with the conducting oxide coated glass and plastic substrates compared to the P_O-based film. The corresponding low-temperature sintered P_BL-based f-DSSC showed a power conversion efficiency (PCE) of 3.5%, while it was 2.0% for P_O-based f-DSSC. The P_BL-based low- and high-temperature (500℃) sintered glass-based rigid DSSCs exhibited the PCE of 6.0 and 6.3%, respectively, while this value was 7.1% for a 500℃ sintered rigid DSSC based on a commercial (or conventional) paste.

• Food Science of Animal Resources
• /
• v.42 no.5
• /
• pp.800-815
• /
• 2022

This study aimed to obtain high Fischer's ratio oligopeptides from goat whey (HFO) and investigate antioxidant property of it. Hydrolysis of goat whey was done with the approach of sequential digestion of pepsin and flavourzyme. With the adsorption of aromatic amino acids by activated carbon, HFO with a Fischer's ratio of 27.070 and a molecular weight of 200-1,000 Da were obtained, and the branched-chain amino acids accounted for 22.87%. Then the antioxidant activity of HFO was evaluated. At the concentrations of 2.0 mg/mL and 0.50 mg/mL, HFO scavenged 77.27% and 99.63% of 1,1-diphenyl-2-picrylhydrazyl and 3-ethylbenzthiazoline-6-sulphonate free radicals respectively. The scavenging rate of HFO against hydroxyl radicals reached 92.31% at the concentration of 0.25 mg/mL. Animal experiments demonstrated that HFO could moderate the changes of malondialdehyde, superoxide dismutase and glutathione peroxidase caused by CCl₄-induced oxidative stress in vivo. This study indicated that HFO from goat whey was capable of oxidation resistance both in vivo and in vitro, which provided a scientific basis for the high-value processing and application of goat milk whey.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.541-547
• /
• 2023

The effect of temperature and influent alkalinity/ammonia (K/A) ratio on the start-up of the partial nitrification (PN) process for an activated sludge-based domestic wastewater treatment was studied. Two different sequence batch reactors (SBR) were operated at 26 ℃ and 32 ℃. The relationship between temperature and the concentration of free ammonia (FA) and free acid nitrite (FNA) was investigated. A stable PN process was achieved in the 32 ℃ reactor when the influent ammonium concentration was lower than 150 mg-N/L. In contrast, the PN process in the 26 ℃ reactor had a higher nitrite accumulation rate (NAR) and ammonium removal efficiency (ARE) when the influent ammonia concentration was increased to more than 150 mg-N/L. Then three different ranges of the K/A ratio were applied to an SBR reactor. In the K/A range of 2.48~1.65, the SBR reactor achieved the highest NAR ratio (75.78%). This ratio helps to achieve the appropriate level of alkalinity to maintain a stable pH and provide a sufficient amount of inorganic carbon source for the activity of microorganisms. At the same time, FA and FNA values also reached the threshold to inhibit nitrite-oxidizing bacteria (NOB) without a significant effect on ammonia-oxidizing bacteria (AOB). Results showed that the control of temperature and K/A ratio during the start-up period may be important in establishing a stable and steady PN process for the treatment of domestic wastewater.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.520-525
• /
• 2014

In this paper, the effect of silane-treated silicas and epoxidized soybean oil (ESBO) addition on adhesion properties of silicas-filled epoxy adhesives was examined. The silicas were treated by ${\gamma}$-methacryloxy propyltrimethoxy silane (MPS), ${\gamma}$-glycidoxy propyl trimethoxy silane (GPS), and ${\gamma}$-mercapto propyl trimethoxy silane (MCPS). Surface and structural properties of the adhesives were determined by using scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FT-IR). The t-peel strength of the adhesives was estimated using the universal testing machine (UTM). And, the equilibrium spreading pressure, surface free energy, and specific surface area were investigated by BET methods with $N_2$/77 K adsorption. As a result, the peel strength of the adhesives was increased in the presence of silane-treated silicas in the adhesives compared to that of untreated silicas. This result indicated that the silane coupling agent played an important role in improving the dispersion of silicas in epoxy adhesives. And, the adhesives treated by MCPS were superior to the others in adhesion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1152-1158
• /
• 2016

Morphological and physiological alterations occur in the digestive system of weanling piglets, compromising the performance in subsequent phases. This experiment aimed at verifying the influence of glutamine, glutamate and nucleotides on the carbon turnover in the pancreas and liver of piglets weaned at 21 days of age. Four diets were evaluated: glutamine, glutamic acid or nucleotides-free diet (CD); containing 1% glutamine (GD); containing 1% glutamic acid (GAD) and containing 1% nucleotides (ND). One hundred and twenty-three piglets were utilized with three pigs slaughtered at day zero (weaning day) and three at each one of the experimental days (1, 2, 4, 5, 7, 9, 13, 20, 27, and 49 post-weaning), in order to collect organ samples, which were analyzed for the ${\delta}^{13}C$ isotopic composition and compared by means of time. No differences were found (p>0.05) among treatments for the turnover of the $^{13}C$ in the pancreas ($T_{50%}$ = 13.91, 14.37, 11.07, and 9.34 days; $T_{95%}$ = 46.22, 47.73, 36.79, and 31.04 days for CD, GD, GAD, and ND, respectively). In the liver, the ND presented accelerated values of carbon turnover ($T_{50%}=7.36$ and $T_{95%}=24.47days$) in relation to the values obtained for the GD ($T_{50%}=10.15$ and $T_{95%}=33.74days$). However, the values obtained for the CD ($T_{50%}=9.12$ and $T_{95%}=30.31days$) and GAD ($T_{50%}=7.83$ and $T_{95%}=26.03days$) had no differences (p>0.05) among other diets. The technique of $^{13}C$ isotopic dilution demonstrated trophic action of nucleotides in the liver.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.306-309
• /
• 2005

One of the most critical issues in sol id oxide fuel cell (SOFC)running on hydrocarbon fuels is the risk of carbon formation from the fuel gas. The simple method to reduce the risk of carbon formation from the reactions is to add steam to the fuel stream, leading to the carbon gasification react ion. However, the addition of steam to fuel is not appropriate for the auxiliary power unit (APU) and potable power generation (PPG) systems due to an increase of complexity and bulkiness. In this regard, many researchers have focused on so-called 'direct methane' operation of SOFC, which works with dry methane without coking. However, coking can be suppressed only by the operation with a high current density, which may be a drawback especially for the APU and PPG systems. The single chamber fuel cell (SC-SOFC) is a novel simplification of the conventional SOFC into which a premixed fuel/air mixture is introduced. It relies on the selectivity of the anode and cathode catalysts to generate a chemical potential gradient across the cell. Moreover it allows compact and seal-free stack design. In this study, we fabricated honeycomb type mixed-gas fuel cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-structured SOFC with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites. We will discuss that the anode supported honeycomb type cell running on mixed gas condition.

• The Korean Journal of Mycology
• /
• v.27 no.6 s.93
• /
• pp.386-393
• /
• 1999

Ethanol is considered as one of the most suitable substitutes for the petroleum, since it offers attractive functional features at an economical cost. Glucoamylase producing yeasts were isolated and characterized. Based on the morphological character, carbon fermentations, assimilation of carbon and nitrate, growth on vitamine-free medicine, and urease activity, five isolates of Saccharomyces diastaticus, two isolates of Saccharomycopsis fibuligera, and two of Schwanniomyces occidentalis, and each isolate of Ambrosiozyma monospora and Lipomyces kononenkoae were identified. Among 12 isolates, one of the S. diastaticus, E3 showed the highest activity of glucoamylase and identified as Saccharomyces diastaticus. The hydrolysis of starch by the E3 strain showed the release of considerable amount of reducing sugar, along with the reduction in iodine staining capacity. The product of action of glucoamylase, glucose was determined by thin-layer chromatography. The enzyme activity was found to be stable in broad pH range of $5.0{\sim}7.0$ with optimal activity at pH $5.0{\sim}6.0$. The enzyme showed optimal antivity at $50^{\circ}C{\sim}60^{\circ}C$. Soluble starch and glucose were better carbon sources for the enzyme production than xylose and glycerol. $Na^+\;and\;Mg^{2+}$ increased the glucoamylase activity, however $Hg^{2+}\;and\;Ag^{2+}$ inhibited the activity. Soluble starch was the best substrate for the enzyme activity.