• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.40-47
• /
• 1996

A method for computing effectiv ebandwidth of aggregated varable bit rate (VBR) moving picture experts group (MPEG) video traffic is proposed. To compute statistical characteristics of aggregated MPEG traffic, first we split input MPEG traffic into I, B, and P frame traffics and aggregate respective I, B, and P frame traffics according to the frame type. Second statisticsal characteristics of the aggregated MPEG traffic are obtained using those of aggregated I, B, and P frame traffics. The effective bandwidth of the aggregated I frame traffic is computed by using the gaussian bound. Using the modified equivalent capacity, we obtain the effective bandwidths of aggregated B and P frame traffics and then compute the effective bandwidth of the combined B and P frame traffic. Finally the effective bandwidth of the aggregated MPEG traffic is computed by adding the gaussian bound of the aggregated I frame traffic and modifed equivalent capacity of combined B and P frame traffic. Computer simulation shows that the proposed method estimates effective bandwidth of the aggregated MPEG traffic well.

• Journal of Communications and Networks
• /
• 제15권5호
• /
• pp.514-526
• /
• 2013

With a long sensing period, the inter-frame spectrum sensing in IEEE 802.22 standard is vulnerable to the effect of the traffic of the primary user (PU). In this article, we address the two degrading factors that affect the inter-frame sensing performance with respect to the random arrival/leaving of the PU traffic. They are the noise-only samples under the random arrival traffic, and the PU-signal-contained samples under the random leaving traffic. We propose the model in which the intra-frame sensing cooperates with the inter-frame one, and the inter-frame sensing uses the time-of-arrival (ToA), and time-of-leave (ToL) detectors to reduce the two degrading factors in the inter-frame sensing time. These ToA and ToL detectors are used to search for the sample which contains either the ToA or ToL of the PU traffic, respectively, which allows the partial cancelation of the unnecessary samples. At the final stage, the remaining samples are input into a primary user detector, which is based on the energy detection scheme, to determine the status of PU traffic in the inter-frame sensing time. The analysis and the simulation results show that the proposed scheme enhances the spectrum-sensing performance compared to the conventional counter-part.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3108-3115
• /
• 1999

Frame relay needs UPC function for the multiplexed logical connections to prevent malicious user traffic from incoming to network, to guarantee the QoS of conformed user traffic, and to protect the normal operation of network system. On the FR/ATM interworking in ATM networks, the UPC may be conducted either by cell-based ATM UPC or frame-based FR UPC. Frames come into and traverse ATm networks by segmentation to ATM cells. Of course, FR QoS should be guaranteed in spite of segmentation and reassembly in ATM networks. In this paper, we compared the QoS of cell-based ATM UPC and frame-based FR UPC in terms of analysis and simulation in case of ingress of excess traffic over negotiated traffic parameters at user-to-network interface. Also we studied frame-based UPC schemes including window-based FR UPC and frame-based VSA which is an ATM UPC algorithm recommended by ITU-T. We described introductions to frame relay including frame structure and FR/ATM interworking, FR traffic parameters and their relationship, comparison of FR QoS between frame-based FR UPC and cell-based ATM UPC, comparison of FR UPC schemes, necessities of egress traffic control, and conclusions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권3호
• /
• pp.205-223
• /
• 2010

In this paper, we analyze the impact of different frame types on self-similarity and burstiness characteristics of the aggregated frame traffic from a real 802.11 wireless local area network. We find that characteristics of aggregated frame traffic are affected by both mean frame size and the proportion of specified frame types. Based on this new knowledge, an adaptative frame size optimization (AFSO) mechanism is proposed to improve the transmission efficiency by adaptively adjusting data frame size according to the proportions of different frame types. Simulation results show that our proposed mechanism can effectively regulate the burstiness of aggregated frame traffic and improve the successful delivery rate of data frames when a fixed throughput target is set for 802.11 wireless networks.

• 한국정보처리학회논문지
• /
• 제6권1호
• /
• pp.175-181
• /
• 1999

ATM과 non-ATM 간의 서비스가 연동도기 위해서는 트래픽 파라메타가 고려되어야 한다. 예를 들면 프레임 기반의 FR 트래픽 제어와 셀 기반의 ATM UPC와는 QoS 측면에서 정확하게 일치하기 어렵다. ATM 과 FR은 서로 다른 전달 모드와 트래픽 파라메타를 가지며, 기본 단위가 프레임과 셀로서 별도의 제어 방법을 갖는다. 또한 동일 사용자 정보를 전송하는데 ATM 측의 대역이 FR보다 훨씬 크다. 이는 ATM 셀 및 AAL5 구성 형태에서 기인하는데 FR/ATM 연동시 트래픽 파라메타를 사상하는데 대역비가 사용된다. 따라서 FR/ATM 연동에서 트래픽 파라메타를 사상하여 망간의 QoS를 유지시키며, 망의 자원을 효율적으로 활용하기 위해서는 적합한 트래픽 대역비를 고려하여야 한다. 본 논문에서는 ATM 망에서 FR과 ATM 간 QoS를 유지하기 위하여 이들 간의 트래픽 파라메타를 사상하는 방법을 소개하고, 도일 사용자 정보를 전달하는데 필요한 FR과 ATM 간의 대역 비를 예측하는 방법을 기술한다. 본 논문에서는 대역비를 예측하는데 필요한 사용자 트래픽의 프레임 길이 분포를 Erlang 또는 지수 함수로 가정하고 수행하였다.

• Journal of Communications and Networks
• /
• 제14권6호
• /
• pp.653-661
• /
• 2012

High-availability seamless redundancy (HSR) is a redundancy protocol for Ethernet networks that provides two frame copies for each frame sent. Each copy will pass through separate physical paths, pursuing zero fault recovery time. This means that even in the case of a node or a link failure, there is no stoppage of network operations whatsoever. HSR is a potential candidate for the communications of a smart grid, but its main drawback is the unnecessary traffic created due to the duplicated copies of each sent frame, which are generated and circulated inside the network. This downside will degrade network performance and might cause network congestion or even stoppage. In this paper, we present two approaches to solve the above-mentioned problem. The first approach is called quick removing (QR), and is suited to ring or connected ring topologies. The idea is to remove the duplicated frame copies from the network when all the nodes have received one copy of the sent frame and begin to receive the second copy. Therefore, the forwarding of those frame copies until they reach the source node, as occurs in standard HSR, is not needed in QR. Our example shows a traffic reduction of 37.5%compared to the standard HSR protocol. The second approach is called the virtual ring (VRing), which divides any closed-loop HSR network into several VRings. Each VRing will circulate the traffic of a corresponding group of nodes within it. Therefore, the traffic in that group will not affect any of the other network links or nodes, which results in an enhancement of traffic performance. For our sample network, the VRing approach shows a network traffic reduction in the range of 67.7 to 48.4%in a healthy network case and 89.7 to 44.8%in a faulty network case, compared to standard HSR.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.413-416
• /
• 2003

This paper proposes an adaptive background image generation method based on the frame difference for traffic monitoring. The performance of the conventional method is limited when there are more vehicles due to traffic Jam. To improve on this, we use frame differencing to separate vehicles from background in frame differencing, we adopt selective approach by using part of the image not considered as vehicle fer extraction of background. The proposed method generates background more efficiently than conventional methods even in the presence of heavy traffic.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.372-375
• /
• 2008

IEEE 802.11e standardized the EDCA mechanism to support the priority based QoS. And the virtual collision handler schedules the transmission time of each MAC frame using the internal back-off window according to the access category(AC). This can provides the differentiated QoS to real-time services at the medium traffic load condition. However, the transmission delay of MAC frame for real-time services may be increased as the traffic load of best effort service increases. It becomes more critical when the real-time service uses a compressed mode video codec such as moving picture experts group(MPEG) 4 codec. That is because each frame has the different importance. That is, the I-frame has more information as compared with the P- and the B-frame. In this paper, we proposed a buffer management algorithm based on the frame importance and the delay bound. The proposed algorithm is consisted of the traffic regulator based on the dual token bucket algorithm and the active queue management algorithm. The traffic regulator reduces the transmission rate of lower AC until that the virtual collision handler can transmit an I-frame. And the active queue management discards frame based on the importance of each frame and the delay bound of head of line(HoL) frame when the channel resource is insufficient.

• 한국통신학회논문지
• /
• 제24권7B호
• /
• pp.1261-1267
• /
• 1999

프레임 릴레이망을 백본으로 한 LAN과 LAN 접속으로 형성되는 서비스가 PVC 형태로 제공되고 있다. 이는 향후 ATM 망을 백본으로 한 프레임 릴레이 인터페이스를 제공하기 위해, 다양한 서비스의 접속과 서비스 질을 만족하는 Frame Relay/ATM (FR/ATM) 연동장치가 필요하다. 본 논문에서는 FR/ATM 연동장치에서 프레임 릴레이 트래픽에 대한 성능분석의 모의 실험을 토큰 방식에 근거한 리킷 버킷 알고리즘으로 수행하였다. 다양한 트래픽을 발생시킨 컴퓨터 모의실험에서 프레임 릴레이망으로부터 수신되는 프레임이 정상적으로 처리될 비율, 프레임이 정상적으로 처리되나 버려질 수 있는 비율 및 충분하지 못한 토큰으로 인하여 프레임이 버려질 수 있는 비율이 다양하게 제시되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1123-1140
• /
• 2019

Many Internet of Things (IoT) applications involving bursty traffic have emerged recently with event detection. A power management scheme qualified for uplink bursty traffic (PM-UBT) is proposed by distinguishing between bursty and general uplink traffic patterns in the IEEE 802.11 standard to balance energy consumption and uplink latency, especially for stations with limited power and constrained buffer size. The proposed PM-UBT allows a station to transmit an uplink bursty frame immediately regardless of the state. Only when the sleep timer expires can the station send uplink general traffic and receive all downlink frames from the access point. The optimization problem (OP) for PM-UBT is power consumption minimization under a constrained buffer size at the station. This OP can be solved effectively by the bisection method, which demonstrates a performance similar to that of exhaustive search but with less computational complexity. Simulation results show that when the frame arrival rate in a station is between 5 and 100 frame/second, PM-UBT can save approximately 5 mW to 30 mW of power compared with an existing power management scheme. Therefore, the proposed power management strategy can be used efficiently for delay-intolerant uplink traffic in event-driven IoT applications, such as health status monitoring and environmental surveillance.