• 한국정보통신학회논문지
• /
• 제22권1호
• /
• pp.54-62
• /
• 2018

기술의 발전에 따라 다양한 응용을 위한 장치가 연구 및 개발되고 있으며 운전자 보조 시스템은 그 중 대표적인 기술이다. 운전자 보조 시스템 기술은 차량 주변의 정보를 인식하기 위해 영상인식 기법을 사용한다. 차량에 적용되는 운전자 보조 장치는 계산시간이 오래 걸리는 다수의 영상인식기법을 실시간으로 처리하는데 어려움이 존재한다. 이를 위해 제한된 하드웨어에서 영상인식 기법의 실시간 처리를 위한 동적 프레임 제외 기법을 제안한다. 기존의 연구에서 프레임 제외는 처리시간에 비례하여 정적으로 설정되었으며 처리 할 수 있는 영상인식기법의 수가 적음을 알 수 있다. 차량의 속도와 가속도를 통해 주행상태를 파악하여 동적으로 프레임 제외률을 설정하고 그에 맞게 영상인식 기법을 처리하여 그 수를 최대화시켰다. 실험을 통해 처리 수가 정적 기법에 비해 32.5% 상승함을 확인하였다.

• 대한음성학회지:말소리
• /
• 제52호
• /
• pp.111-120
• /
• 2004

This paper focuses on the DSP implementation of an HMM-based speech recognizer that can handle several hundred words of vocabulary size as well as speaker independency. First, we develop an HMM-based speech recognition system on the PC that operates on the frame basis with parallel processing of feature extraction and Viterbi decoding to make the processing delay as small as possible. Many techniques such as linear discriminant analysis, state-based Gaussian selection, and phonetic tied mixture model are employed for reduction of computational burden and memory size. The system is then properly optimized and compiled on the TMS320C6711 DSP for real-time operation. The implemented system uses 486kbytes of memory for data and acoustic models, and 24.5 kbytes for program code. Maximum required time of 29.2 ms for processing a frame of 32 ms of speech validates real-time operation of the implemented system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.135-137
• /
• 2004

In this study we'll deal with the small-sized metalized film capacitors with large capacity which head have $5mm{\times}5mm{\times}2.5mm$ dimension. The lead wire is used to weld at both sides of capacitors. At that time the position gap between the welding machine and lead wire supplier would cause the welding error. Also, during the tapping processing of metalized film capacitors, the interval error among the capacitors, the length error of lead frame attached at the capacitors, and the straightness distortion of the lead frame could happen. As mentioned, four kinds of error parameters will be measured and analyzed by using the automatic visual inspection system that is implemented with CCD camera, optical parts, background lighting, and image processing algorithms. Finally we are able to achieve success rate above 99% to detect the welding faults of capacitors in the field test.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.211-221
• /
• 1998

A digital image processing technique which is able to get the velocity vector distribution of a surface of the spilled oil in the ocean without contacting the flow itself. This technique is based upon the PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a high sensitive camera, a CCD camera, an image grabber, and a host computer in which an image processing algorithm is adopted for velocity vector acquisition. For the acquisition of the advective velocity vector of floating matters on the ocean, a new multi-frame tracking algorithm is proposed, and for the acquisition of the diffusion velocity vector distribution of the spilt oil onto the water surface, a high sensitive gray-level cross-correlation algorithm is proposed.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.162-168
• /
• 2005

A methodology for the objective evaluation of water repellency is studied using image analysis of the sprayed pattern on woven fabrics according to a standard spray test (AATCC Test Method 22-2001). The wet area ratio obtained from the spray standard test ranking is found to be exponentially related with its water repellency rating. Mean filtering is used to remove the effect of weave texture and the transmitted light through interyarn spaces. The ring frame of the instrument and wet region are recognized using Otsu thresholding technique. And Hough transform and outline operation are used to obtain the size and position of the ring frame. The objective assessment of the water repellency using image processing can reduce unnecessary confusion in the subjective determination of the water repellency.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.61-68
• /
• 2001

A parallel nonlinear analysis program of prestressed concrete frame is migrated on a PC cluster system and a massively parallel processing system, CRAY T3E system, using MPI. The PC cluster system is configured with Pentium Ⅲ class PCs and fast ethernet. The CRAY T3E system is composed of a set of nodes each containing one Processing Element (PE), a memory subsystem and its distributed memory interconnect network. Parallel computing algorithms are implemented on element-wise processing parts including the calculation of stiffness matrix, element stresses and determination of material states, check of material failure and calculation of unbalanced loads. Parallel performance of the migrated program is evaluated through typical numerical examples.

• 한국항만학회지
• /
• 제12권2호
• /
• pp.291-302
• /
• 1998

A digital image processing technique which is able to be used for getting the velocity vector distribution of a surface of the spilt oil in the ocean without contacting the flow itself. This technique is based upon the PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a high sensitive camera, a CCD camera, an image grabber, and a host computer in which an image processing algorithm is adopted for velocity vector acquisition. For the acquisition of the advective velocity vector of floating matters on the ocean, a new multi-frame tracking algorithm is proposed, and for the acquisition of the diffusion velocity vector distribution of the spilt oil onto the water surface, a high sensitive gray-level cross-correlation algorithm is proposed.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1998년도 Proceedings of International Workshop on Advanced Image Technology
• /
• pp.92-97
• /
• 1998

For the efficient searching and browsing of digital video, it is essential to extract the internal structure of the video contents. As an example, a news video consists of several sections such as politics, economics, sports and others, and also each section consists of individual topics. With this information in hand, users can ore easily access the required video frames. This paper addresses the problem of automatic shot boundary detection and selection of representative frames (R-frames), which are the essential step in recognizing the internal structure of video contents. In the shot boundary detection, a new algorithm that have dual detectors which are designed specifically for the abrupt boundaries (cuts) and gradually changing bounaries respectively is proposed. Compared to the existing 미algorithms that mostly have tried to detect both types by a single mechanism, the proposed algorithm is proved to be more robust and accurate. Also in the problem of R-frame selection, simple mechanical approaches such as selecting one frame every other second have been adopted. However this approach often selects too many R-frames in static short, while drops important frames in dynamic shots. To improve the selection mechanism, a new R-frame selection algorithm that uses motion information extracted from pixel difference is proposed.

• 한국위성정보통신학회논문지
• /
• 제9권4호
• /
• pp.1-6
• /
• 2014

컬러 영상 처리 기반의 연기 검출은 화재의 조기 검출에 적합한 검출 대상이다. 연기 검출을 위한 방법으로 움직임과 색상이 전처리로서 처리되며, 확산, 질감, 형태, 방향성 등의 성질이 후처리로서 사용된다. 본 논문은 연기의 특성 중 밀도적인 분포 특성 검출 방법을 제안한다. 연기의 움직임을 10Frame 간격으로 1초 동안 축적한 이미지에 색상을 문턱치 처리해 후보영역을 생성하고, OBTP(Object Block Ternary Pattern)을 적용해 연기의 패턴임을 확인한다. 모든 처리는 Block 기반으로, 움직임 검출은 차분 영상에 적응 문턱치를 적용해 움직이는 물체의 후보영역을 결정했다. 결정된 후보영역을 1초간 축적하고 연기 색상의 문턱치 조건을 적용한다. 각각의 연기 후보 영역을 특정 위치의 16개 Block 값을 중앙 Block 값과 비교하고 삼진화 된 패턴을 연기의 패턴과 비교하여 연기를 결정한다.

• 소성∙가공
• /
• 제20권2호
• /
• pp.104-109
• /
• 2011

The metal front case of a mobile phone is manufactured by press forming and welding of thin metal sheets. Twisting of the frame after the forming process is one of main obstacle for the assembly with reinforcement by welding. This study introduces a method preventing twisting of the metal front case frame in press forming. The spring-back after forming produces twisting of the frame, which leads to a low structural stiffness. To reduce twisting, connectors are required to reinforce the structural stiffness of the frame. In this study, the twisting profile is evaluated using a finite element(FE) analysis for various connector shapes. The actual connector shape is determined by minimization of the frame twisting within the tolerance of the FE-analysis. To verify the validity of the proposed blank shape, a forming experiment is performed and the twisting profile is measured using a 3D laser scanning method. The dimensional accuracy is found to be within the tolerance and in good agreement with the FE-analysis.