• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.34-42
• /
• 1994

The present study is aimed to improve the PIV performance by suggesting a two-frame particle identification technique and by introducing estimation method of wall pressure distribution from the velocity data. Adopted image processing system consists of one commercial image board slit into a personal computer, 2-D sheet light generator, flow picture recording apparatus and related particle identification software. A revised particle tracking method essential to PIV performance is obtained by particle centroid correlation pairing (CCP) and its effectiveness is ascertained by comparison with multi-frame identification.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.37-40
• /
• 2000

This paper deal with a movable boundary multiple access scheme and frame format for ATM over satellite. By mathematical modeling and simulation, we can see that suggested frame format is suitable for non-realtime traffic users.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1103-1106
• /
• 2004

Window Frame 방향성 추출법을 보완한 Extended Window Frame을 제시하고, 높은 보완성을 필요로 하는 곳에 사용할 수 있도록 하기 위해서 지문의 중심점으로부터 매칭 된 각각의 특징점까지 이르는 선상에 있는 융선을 추적하는 방법을 이용한 검증 방법을 제안한다. 제안된 검증 방법의 성능을 비교하기 위해서 방향성을 추출하는 방법, 특징점을 추출하는 방법을 기존의 여러 가지 방법들로 구현하고 그 결과를 비교, 분석한다.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.1
• /
• pp.16-21
• /
• 2015

Most video services are transmitted in wireless networks. In a network environment, a packet of video is likely to be lost during transmission. For this reason, numerous error concealment (EC) algorithms have been proposed to combat channel errors. On the other hand, most existing algorithms cannot conceal the whole missing frame effectively. To resolve this problem, this paper proposes a new Adaptive Prediction Unit-based Motion Vector Extrapolation (APMVE) algorithm to restore the entire missing frame encoded by High Efficiency Video Coding (HEVC). In each missing HEVC frame, it uses the prediction unit (PU) information of the previous frame to adaptively decide the size of a basic unit for error concealment and to provide a more accurate estimation for the motion vector in that basic unit than can be achieved by any other conventional method. The simulation results showed that it is highly effective and significantly outperforms other existing frame recovery methods in terms of both objective and subjective quality.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.723-726
• /
• 2009

This paper describes a non-causal interpolative prediction method for B-picture encoding. Interpolative prediction uses correlations between neighboring pixels, including non-causal pixels, for high prediction performance, in contrast to the conventional prediction, using only the causal pixels. For the interpolative prediction, the optimal quantizing scheme has been investigated for preventing conding error power from expanding in the decoding process. In this paper, we extend the optimal quantization sceme to inter-frame prediction in video coding. Unlike H.264 scheme, our method uses non-causal frames adjacent to the prediction frame.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.5
• /
• pp.473-480
• /
• 2017

We investigated the nutritional characteristics of the uncooked Skipjack tuna Katsuwonus pelamis frame (U-STF) as a basic resource for preparing flavor-enriching concentrates. The bone rate based on the fish frame (FF) was 53.2% in U-STF, thus lower than those of cooked skipjack tuna frame (C-STF), the uncooked salmon frame (U-SF), and beef leg bone (BLB). The composition of FF had 48.6-58.0% moisture, 18.4-21.3% crude protein, 7.0-15.0% crude lipid, and 12.8-22.1% ash. Compared to the proximate composition of BLB, that of FF was higher moisture and crude protein but lower solids, crude lipids, and ash. The total amino acid contents of FF was 17.6-20.8 g/100 g, which was higher than that of BLB. The levels of calcium and phosphorus of FF were 4.7-8.5 g/100 g and 2.4-4.2 g/100 g, respectively, thus lower than those of BLB. The brix concentration of FF extract was $5.0-8.2^{\circ}$, being highest in U-STF extracts, followed by extracts of U-SF and then extracts of C-STF. Our results indicate that U-STF is an optimal resource for preparing flavor-enriching concentrates.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.175-181
• /
• 1999

There are issues regarding how some of traffic parameters should be set so that ATM and non-ATM service parameters can be compatible. For example, policing method used by frame relay based on CIR(committed information rate) will not exactly match the ATM UPC(Usage Parameter Control) method. ATM and the frame relay have different transfer modes and traffic parameters. The cells and frames are police by their own traffic control schemes. For the same information, the real traffic of the ATM side takes greater bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. IN both networks this bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. In both networks this bandwidth ratio should be considered on traffic parameter mapping to maintain their QoS and to perform efficient network resource management. In this paper we describe traffic parameter mapping schemes between frame relay and ATM in ATM network and how to expect the bandwidth ratio to maintain FR QoS in ATM network. We assumed frame length distribution to Erlang or Exponential probability density function.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.469-475
• /
• 2010

In this paper, the structural integrity and fatigue strength for the bogie frame of Monorail being developed in domestic was evaluated. Presently, the standard of evaluation for the bogie frame of monorail was not regulated. Therefore, the evaluation of the structural integrity and fatigue strength for the bogie frame was performed on the basis of the UIC 615-4 standard. The structural integrity of the designed bogie frame was evaluated by displacement and Von-Mises stress under each load conditions. And the fatigue strength was evaluated by combined main in-service load conditions specified at UIC 615-4 standard and it was compared with result of fatigue analysis using winLIFE v3.1 with the function of batch processing. The results shows that the structural integrity and fatigue strength of the designed bogie frame was satisfied, and the fatigue analysis using batch processing was more effective than conventional fatigue analysis using combined load conditions.

• Journal of the Korea Convergence Society
• /
• v.5 no.2
• /
• pp.25-32
• /
• 2014

Indian economy growth changed due Indian business operational approach with convergent technologies. The current economy growth supported by Information Technology Development and Information Technology Enabled Service. As part of the Information technology enabled upcoming Knowledge processing outsourcing provide huge opportunities to develop Indian business with our human resources. The KPO business sector basis and frame work can be achieve through Development Dynamic initiatives. This paper discuss about the basis of KPO and Dynamic Development Initiative frame work strategic compact components and its characters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.908-911
• /
• 2004

In this paper, we describe a robust image processing algorithm to recognize the road lane in real-time. For the real-time processing, a detection area is decided by a lane segment of a previous frame and edges are detected on the basis of the lane width. For the robust driving, the global threshold with the Otsu algorithm is used to get a binary image in a frame. Therefore, reliable edges are obtained from the algorithms suggested in this paper in a short time. Lastly, the lane segment is found by hough transform. We made a RC(Radio Control) car equipped with a vision system and verified these algorithms using the RC Car.