• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.125-136
• /
• 2002

It is very important to acquire the synchronization in a intercell asynchronous WCDMA system, and it is carried out through the three-step cell search process. The cell search can operate in a stepwise parallel manner, where each step works in pipelined operation, to reduce the cell search time. In case that the execution time is set to be the same in each step, excessive accumulations will be caused in both step 1 and step 3, because step 2 should take at least one frame for its processing. In general, the effect of post-detection integration becomes saturated as the number of the accumulations increases. Therefore, the stepwise parallel scheme does not give much enhancement. In this paper, the performance of the stepwise parallel processing for cell search in WCDMA system is analyzed over Rayleigh fading channels. Through the analysis, the effect of cell search parameters such as the number of accumulations in each step and the power ratio allocated among channels is investigated. In addition, the performance of the stepwise parallel cell search is improved by adjusting the execution time appropriately for each step and is compared with that of the conventional stepwise serial processing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.24-33
• /
• 2002

The cell search scheme for W-CDMA consists of the following three stages: slot synchronization(1st stage), group identification and frame boundary detection(2nd stage), and long code identification(3rd stage). The performance of the cell search when a mobile station is switched on, which is referred to as initial cell search, is decreased by the initial frequency and timing error. In this paper, we propose the pipeline structured initial cell search scheme using time trackers to compensate for the impact of the initial timing error in the stage 2 and stage 3. The simulation results show that the performance of the proposed scheme is maximal 1.5dB better than that of the conventional one when the initial timing error is near ${\pm}T_c$/2.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.559-571
• /
• 2013

This paper has presented a few problems when the 2D video superimposed the overlay text was converted to the 3D stereoscopic video. To resolve the problems, it proposes the scenario which the original video is divided into two parts, one is the video only with overlay text graphic region and the other is the video with holes, and then processed respectively. And this paper focuses on research only to detect and extract the overlay text graphic region, which is a first step among the processes in the proposed scenario. To decide whether the overlay text is included or not within a frame, it is used the corner density map based on the Harris corner detector. Following that, the overlay text region is extracted using the hybrid method of color and motion information of the overlay text region. The experiment shows the results of the overlay text region detection and extraction process in a few genre video sequence.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.403-411
• /
• 2008

The alignment of facial images is crucial for 2D face recognition. This is the same to facial meshes for 3D face recognition. Most of the 3D face recognition methods refer to 3D alignment but do not describe their approaches in details. In this paper, we focus on describing an automatic 3D alignment in viewpoint of quantitative analysis. This paper presents a framework of 3D face alignment and normalization based on feature points obtained by Active Shape Models (ASMs). The positions of eyes and mouth can give possibility of aligning the 3D face exactly in three-dimension space. The rotational transform on each axis is defined with respect to the reference position. In aligning process, the rotational transform converts an input 3D faces with large pose variations to the reference frontal view. The part of face is flopped from the aligned face using the sphere region centered at the nose tip of 3D face. The cropped face is shifted and brought into the frame with specified size for normalizing. Subsequently, the interpolation is carried to the face for sampling at equal interval and filling holes. The color interpolation is also carried at the same interval. The outputs are normalized 2D and 3D face which can be used for face recognition. Finally, we carry two sets of experiments to measure aligning errors and evaluate the performance of suggested process.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.266-273
• /
• 2013

Phthalocyanine (Pc), porphyrin, subphthalocyanine, and perylene compounds can be applicable to the fields of optical storage media, organic solar cell, LCD, PDP, semiconductor, and counterfeit money detection etc. In this study, phthalocyanine hybrid derivatives were synthesized by cross-linking perylene, subphthalocyanine, or porphyrin to the main frame of Pc. Absorbtion band of two different wavelengths appeared simultaneously in the phthalocyanine hybrid derivatives. Compared to phthalocyanine, the solubility was enhanced and the degree of Q-band shift was changed according to the kind of substitute compounds. The chemical and optical properties of samples were analyzed using FT-IR, $^1H-NMR$, and UV-Vis spectroscopic techniques.

• The Plant Pathology Journal
• /
• v.15 no.3
• /
• pp.137-143
• /
• 1999

A novel chromosomal gene tagging technique using a specific fragment of the fatty acid desaturase-like open reading frame (des-like ORF) from the tox-argK gene cluster of Pseudomonas syringae pv. phaseolicola was developed to identify Xanthomonas spp.released into the environment as biocontrol agents. X. campestris pv. convolvuli FB-635, a pathogen of Convolvulus arvensis L., (bindweed), was chosen as the organism in which to develop and test the system. A 0.52 kb DES fragment amplified from P. syringae pv. phaseolicola C-199 was inserted into pGX15, a cosmid clone containing a 10.3 kb Eco RI-HindIII fragment derived from the xanthomonadin biosynthetic gene cluster contained in plasmid pIG102, to create a pigG::DES insertion. The 10.8 kb EcoRI-BamHI fragment carrying the pigG:: DES insertion was cloned into pLAFR3 to generate pLXP22. pLXP22 was then conjugated into X. campestris pv. convolvuli FB-635 and the pigG::DES insertion integrated into the bacterial chromosome by marker exchange. Rifampicin resistant, tetracycline sensitive, starch hydrolyzing, white colonies were used to differentiate the marked strain from yellow pigmented wild-type ones. PCR primers specific for the unique DES fragment were used for direct detection of the marked strain. Result showed the marked strain could be detected at very low levels even in the presence of high levels of other closely related or competitive bacteria. This PCR-based DES-tagging system provides a rapid and specific tool for directly monitoring the dispersal and persistence of Xanthomonas spp.released into the environment.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.38-48
• /
• 1996

We implemented and evaluated the preformance of a task level pipelined multicomputer "RV860-PIPE(Realtime Vision i860 system using PIPEline)" for computer vision applications. RV860-PIPE is a message-passing MIMD computer having ring interconnection network which is appropriate for vision processing. We designed the node computer of RV860-PIPE using a 64-bit microprocessor to have generality and high processing power for various vision algorithms. Furthermore, to reduce the communication overhead between node computers and between node computer and a frame grabber, we designed dedicated high speed communication channels between them. We showed the practical applicability of the implemented system by evaluting performances of various computer vision applications like edge detection, real-time moving object tracking, and real-time face recognition.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.25-32
• /
• 2006

We propose a new M-ary state-transition FSK modulator technique for enhancing demodulator's symbol timing recovery which can be applied to acoustic MODEM. In the previous technique, the demodulator's symbol timing performance can degrade when the sequences of same symbols are transmitted. This proposed method, because the transmission symbol changes in every single symbol period, increases the synchronization performance dramatically and has a simple MODEM and frame structure. On the one hand, we improve modulation-derived synchronization(MDS) which is M-ary FSK's symbol timing recovery scheme, then analyze it. Finally the proposed method is analyzed from the viewpoint of frequency efficiency, which proves this method is appropriate for acoustic MODEM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3A
• /
• pp.296-305
• /
• 2010

Secondary users should sense the licensed spectrum bands in order to protect the primary users from interference. However, periodic and frequent sensing for immediate detection of primary users usually gives rise to much sensing overhead, and thus will quickly drain the battery as well as deteriorate the performance of a secondary user. To overcome such problems, we focus on the method reducing sensing overhead of each secondary user and propose a distributed fair sensing scheme that the multiple users within a certain area, so-called sensing zone, sense the spectrum bands in a fairly distributed manner and share the results among the users within respective sensing zone. The design of the frame structure for the proposal is also demonstrated while considering the sensing requirements for protecting primary users. The performance results by numerical analyses and computer simulations show that our proposed sensing scheme significantly reduces the sensing overhead of each user compared to the conventional sensing scheme and also satisfies the given sensing requirements for primary user protection.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.5
• /
• pp.227-234
• /
• 2009

The Paper introduces a new technique for block matching motion estimation. since the temporal correlation of a animation sequence between the motion vector of current block and the motion vector of previous block. In this paper, we propose the scene change detection algorithm for block matching using the temporal correlation of the animation sequence and the center-biased property of motion vectors. The proposed algorithm determines the location of a better starting point for the search of an exact motion vector using the point of the smallest SAD(sum of absolute difference) value by the predicted motion vector from the same block of the previous frame and the predictor candidate point on each search region. Simulation results show that the PSNR values are improved as high as 9~32% in terms of average number of search point per motion vector estimation and improved about 0.06~0.21dB on an average except the FS(full search) algorithm.