• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1715-1718
• /
• 2015

Background: Magnetic resonance imaging of breast, reported to be a high sensitivity of 94% to 100%, is the most sensitive method for detection of breast cancer. The purpose of this study was to investigate our clinical experience in MRI-guided breast lesion wire localization in Chinese women. Materials and Methods: A total of 44 patients with 46 lesions undergoing MRI-guided breast lesion localization were prospectively entered into this study between November 2013 and September 2014. Samples were collected using a 1.5-T magnet with a special MR biopsy positioning frame device. We evaluated clinical lesion characteristics on pre-biopsy MRI, pathologic results, and dynamic curve type baseline analysis. Results: Of the total of 46 wire localization excision biopsied lesions carried out in 44 female patients, pathology revealed fourteen malignancies (14/46, 30.4%) and thirty-two benign lesions (32/46, 69.6%). All lesions were successfully localized followed by excision biopsy and assessed for morphologic features highly suggestive of malignancy according to the American College of Radiology Breast Imaging Reporting and Data System (BI-RADS) category of MRI (C4a=18, C4b=17, C4c=8,C5=3). Of 46 lesions, 37 were masses and 9 were non-mass enhancement lesions. Thirty-two lesions showed a continuous kinetics curve, 11 were plateau and 3 were washout. Conclusions: Our study showed success in MRI-guided breast lesion wire localization with a satisfactory cancer diagnosis rate of 30.4%. MRI-guided wire localization breast lesion open biopsy is a safe and effective tool for the workup of suspicious lesions seen on breast MRI alone without major complications. This may contribute to increasing the diagnosis rate of early breast cancer and improve the prognosis in Chinese women.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.57-64
• /
• 2006

Tn this paper, We propose a user friendly object-based multimedia retrieval system using the HCNN(HippoCampus Neural Network. Most existing approaches to content-based retrieval rely on query by example or user based low-level features such as color, shape, texture. In this paper we perform a scene change detection and key frame extraction for the compressed video stream that is video compression standard such as MPEG. We propose a method for automatic color object extraction and ACE(Adaptive Circular filter and Edge) of content-based multimedia retrieval system. And we compose multimedia retrieval system after learned by the HCNN such extracted features. Proposed HCNN makes an adaptive real-time content-based multimedia retrieval system using excitatory teaming method that forwards important features to long-term memories and inhibitory learning method that forwards unimportant features to short-term memories controlled by impression.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.734-738
• /
• 2005

A gene coding for xylanase from alkali-tolerant Bacillus alcalophilus AX2000 was cloned into Escherichia coli $DH5\alpha$ using pUC19. Among 2,000 transformants, one transformant showed clear zone on the detection agar plate containing oat-spells xylan. Its recombinant plasmid, named pXTY99, was found to carry 7.0 kb insert DNA fragment. When the nucleotide sequence of the cloned xylanase gene (xynT) was determined, xynT gene was found to consist of 1,020 base-pair open reading frame coding for a poly-peptide of 340 amino acids with a deduced molecular weight of 40 kDa. The coding sequence was preceded by a putative ribosome binding site, and the transcription initiation signals. The deduced amino acid sequence of xylanase is similar to those of the xylanases from Bacillus sp. Nl37 and B. stearothermophilus 21 with $61\%$ and $59\%$ identical residues, respectively.

• Journal of Broadcast Engineering
• /
• v.7 no.2
• /
• pp.96-106
• /
• 2002

We introduce a novel scheme to characterize and index events in TV golf programs using MPEG-7 descriptors. Our goal is to identify and localize the golf events of interest to facilitate highlight-based video indexing and summarization. In particular, we analyze multiple (low-level) visual features using domain-specific model to create a perceptual relation for semantically meaningful(high-level) event identification. Furthermore, we summarize a TV golf program with TV-Anytime segmentation metadata, a standard form of an XML-based metadata description, in which the golf events are represented by temporally localized segments and segment groups of highlights. Experimental results show that our proposed technique provides reasonable performance for identifying a variety of golf events.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.1
• /
• pp.11-17
• /
• 2000

We present collision-handling method that includes self-penetration in the case of the colliding between rigid and deformable objects. The collision between objects is detected through the overlap test to the hierarchical structures of the objects. For detecting the collision between the objects at in-between frame, we try overlap test using the structures of a dummy and the rigid objects in addition to the test between the rigid and deformable objects. The dummy object is made from the rigid objects moving direction. When collision occurs, a deformable object must be deformed, as the object doesn't permit penetration. Self-penetration may occur during the object is deformed. It is rapidly detected between the object and a dummy object of another type. The dummy object is made from the object's deformation area between two continuous frames. We constrain the object is deformed until it is self-contacted. Our method can be applied without concerning of the shape of a object.

• Genomics & Informatics
• /
• v.10 no.1
• /
• pp.58-64
• /
• 2012

Intron prediction is an important problem of the constantly updated genome annotation. Using two model plant (rice and $Arabidopsis$) genomes, we compared two well-known intron prediction tools: the Blast-Like Alignment Tool (BLAT) and Sim4cc. The results showed that each of the tools had its own advantages and disadvantages. BLAT predicted more than 99% introns of whole genomic introns with a small number of false-positive introns. Sim4cc was successful at finding the correct introns with a false-negative rate of 1.02% to 4.85%, and it needed a longer run time than BLAT. Further, we evaluated the intron information of 10 complete plant genomes. As non-coding sequences, intron lengths are not limited by a triplet codon frame; so, intron lengths have three phases: a multiple of three bases (3n), a multiple of three bases plus one (3n + 1), and a multiple of three bases plus two (3n + 2). It was widely accepted that the percentages of the 3n, 3n + 1, and 3n + 2 introns were quite similar in genomes. Our studies showed that 80% (8/10) of species were similar in terms of the number of three phases. The percentages of 3n introns in $Ostreococcus$ $lucimarinus$ was excessive (47.7%), while in $Ostreococcus$ $tauri$, it was deficient (29.1%). This discrepancy could have been the result of errors in intron prediction. It is suggested that a three-phase evaluation is a fast and effective method of detecting intron annotation problems.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.333-341
• /
• 2008

A remote sensing technique to identify trajectories of breaking waves in the surf zone using oblique digital nearshore videos is proposed. The noise arising from white foam induced by wave breaking has hindered accurate remote sensing of wave properties in the surf zone. For this reason, this paper focuses on image processing to remove the noise and wave trajectory identification essential for wave property estimation. The nearshore video imagery sampled at 3 Hz are used, covering length scale(100 m). Original image sequences are processed through image frame differencing and directional low-pass image filtering to remove the noise characterized by high frequencies in the video imagery. The extraction of individual wave crest features is conducted using a Radon transform-based line detection algorithm in the processed cross-shore image timestacks having a two-dimensional space-time domain. The number of valid wave crest trajectories identified corresponds to about 2/3 of waves recorded by the in-situ sensors.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.4
• /
• pp.468-477
• /
• 2007

The DTC of voltage source inverter-fed PMSMs is based on hysteresis controllers of torque and flux. It has several advantages, namely, elimination of the mandatory rotor position sensor, less computation time, and rapid torque response. In addition, the stator resistance is the only parameter, which should be known, and no reference frame transformation is required. The DTC theory has achieved great success in the control of induction motors. However, for the control of PMSM drives proposed a few years ago, there are many basic theoretical problems that must be clarified. This paper describes an investigation into the effect of the zero voltage space vectors in the DTC system and points out that if using it rationally, not only can the DTC of the PMSM drive be driven successfully, but torque and flux ripples are reduced and overall performance of the system is improved. The implementation of DTC in PMSM drives is described and the switching tables specific for an interior PMSM are derived. The conventional eight voltage-vector switching table, which is namely used in the DTC of induction motors does not seem to regulate the torque and stator flux in a PMSM well when the motor operates at low speed. Modelling and simulation studies have both revealed that a six voltage-vector switching table is more appropriate for PMSM drives at low speed. In addition, the sources of difficulties, namely, the error in the detection of the initial rotor position, the variation of stator resistance, and the offsets in measurements are analysed and discussed.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.157-166
• /
• 2016

In this paper, a new sag and peak voltage detector is proposed for a single-phase inverter using delta square operation. The conventional sag detector is from a single-phase digital phase-locked loop (DPLL) that is based on d-q transformations using an all-pass filter (APF). The d-q transformation is typically used in the three-phase coordinate system. The APF generates a virtual q-axis voltage component with a 90° phase delay, but this virtual phase cannot reflect a sudden change in the grid voltage at the instant the voltage sag occurs. As a result, the peak value is drastically distorted, and it settles down slowly. A modified APF generates the virtual q-axis voltage component from the difference between the current and the previous values of the d-axis voltage component in the stationary reference frame. However, the modified APF cannot detect the voltage sag and peak value when the sag occurs around the zero crossing points such as 0° and 180°, because the difference voltage is not sufficient to detect the voltage sag. The proposed algorithm detects the sag voltage through all regions including the zero crossing voltage. Moreover, the exact voltage drop can be acquired by calculating the q-axis component that is proportional to the d-axis component. To verify the feasibility of the proposed system, the conventional and proposed methods are compared using simulations and experimental results.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.103-109
• /
• 2018

Purpose: This study has been conducted to develop a potato yield monitoring system, consisting of a segmentation algorithm to detect potatoes scattered on a soil surface and a counting system to count the number of potatoes and convert the data from two-dimensional images to masses. Methods: First, a segmentation algorithm was developed using top-hat filtering and processing a series of images, and its performance was evaluated in a stationary condition. Second, a counting system was developed to count the number of potatoes in a moving condition and calculate the mass of each using a mass estimation equation, where the volume of a potato was obtained from its two-dimensional image, and the potato density and a correction factor were obtained experimentally. Experiments were conducted to segment potatoes on a soil surface for different potato sizes. The counting system was tested 10 times for 20 randomly selected potatoes in a simulated field condition. Furthermore, the estimated total mass of the potatoes was compared with their actual mass. Results: For a $640{\times}480$ image size, it took 0.04 s for the segmentation algorithm to process one frame. The root mean squared deviation (RMSD) and average percentage error for the measured mass of potatoes using this counting system were 12.65 g and 7.13%, respectively, when the camera was stationary. The system performance while moving was the best in L1 (0.313 m/s), where the RMSD and percentage error were 6.92 g and 7.79%, respectively. For 20 newly prepared potatoes and 10 replication measurements, the counting system exhibited a percentage error in the mass estimation ranging from 10.17-13.24%. Conclusions: At a travel speed of 0.313 m/s, the average percentage error and standard deviation of the mass measurement using the counting system were 12.03% and 1.04%, respectively.