• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2419-2424
• /
• 2013

In a conventional MOG algorithm, a small threshold for background decision causes the background recognition delay in a periodic background and a large threshold makes it recognize passing objects as background in a stationary background. This paper proposes the improved MOG algorithm using adaptive threshold. The proposed algorithm estimates changes of weight in the dominant model of the MOG algorithm both in the short and long terms, classifies backgrounds into the stationary and periodic ones, and assigns proper thresholds to them. The simulation results show that the proposed algorithm decreases the maximum number of frame in background recognition delay from 137 to 4 in the periodic background keeping the equal performance with the conventional algorithm in the stationary background.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.225-230
• /
• 2012

When a car accident happened, the accident vehicle should broadcast a safe message to its neighbors in multi-hop. However, the pure flooding is difficult to protect a chain-reaction collision because of the frequent collision and the communication delay. To solve this problem, we proposes a back-off algorithm applied to the estimation of the neighbor node count using the t-distribution. And we proposes a MAC protocol preventing the communication delay by separating the neighbor's count collection channel and data channel. As a result, we show the frame reception success rate of our protocol improved more 10% than the previous protocol.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.3
• /
• pp.16-24
• /
• 1994

A single channel adaptive noise canceling (ANC) technique is presented for removing effects of additive noise on the speech signal. The conventional method obtains a reference signal using the pitch estimated on a frame basis from the input speech. The proposed method, however, gets the reference signal using the delay estimated recursively on a sample by sample basis. To estimate the delay, we derive recursion formula of autocorrelation function and average magnitude difference function. The performance of the proposed method is evaluated for the speech signals distorted by the additive white Gaussian noise. Experimental results with normalized least mean square (NLMS) adaptive algorithm demonstrate that the proposed method improves the perceived speech quality quite well besides the signal-to-noise ratio.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1322-1333
• /
• 2014

To track the sinusoidal current under stationary frame and suppress the effects of low-order grid harmonics, the multi-resonant quasi-proportional plus resonant (PR) controller has been extensively used for digitally controlled LCL-type pulse-width modulation (PWM) converters with capacitor-current-feedback active damping. However, designing the controller is difficult because of its high order and large number of parameters. Moreover, the computation and PWM delays of the digitally controlled system significantly affect damping performance. In this study, the delay effect is analyzed by using the Nyquist diagrams and the system stability constraint condition can be obtained based on the Nyquist stability criterion. Moreover, impact analysis of the control parameters on the current loop performance, that is, steady-state error and stability margin, identifies that different control parameters play different decisive roles in current loop performance. Based on the analysis, a simplified controller design method based on the system specifications is proposed. Following the method, two design examples are given, and the experimental results verify the practicability and feasibility of the proposed design method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.1-13
• /
• 1998

The next generation of wireless network will be problably developed as a mobile communications which will support ATM-based multiMedium traffic. We need to develop an dffective MAC protocol in order to support multimedia traffic having variety of QoS characteristics on wireless neteworks. In this paper, we propose a MAC protocol a MAC protocol where mobile terminals having cells to transmit, request slots to base station through requested slot then the base station analyze parameters from mobile and allocate slots to mobile according to priority. The multimedia slot allocation(MSA) protocol divides multimedias applications into real-time/ variant and non real-time services. Entire slots of the frameare partitioned proportionallyby sizeof bandwidth according to types of services, so that related services can use allocated-slots in priority. The proposed algorithm guarantees real time operation since real-time service share slots allocated for non real-real services. The algorithm whih divides slots of the frame is called as an Algorithm A, otherwise as an Algorithm B. The simulation compares by average delay time and cell loss probability between Algorithm and Algorithm B by increasing number of mobile terminal using the proposed MAC protocol. the simulation result for real-time services shows that average delay time and cell loss probability of Algorithm A is better than those of Algorithm B.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.924-925
• /
• 2008

There are many types of grid-connected inverter controllers, PI controller based is the most popular methods. But, a common PI control is produced zero-steady state error and phase delay in sinusoidal reference. Synchronous reference frame or DQ transform based controller is capable for reducing both of zero-steady state error and phase delay is. But DQ transform based controller has cross-coupling component which difficult to analyze the system in single phase model. In this paper, to obtained single phase model of the system, DQ transform based controller is analyzed in two techniques. The first is by neglecting cross-coupling. The second is eliminated cross-coupling component by decoupling method. By these two techniques, single phase model is obtained. Then, the single phase model is analyzed to evaluate its performance in stability and frequency response, through Root Locus and Bode diagram, respectively. MATLAB and PSIM simulation is used to verify the analysis. Simulation result is shown; cross-coupling component has no significant influent to the controller.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.115-122
• /
• 2000

In design of a digital current controller for a 3cP PWM converter, its conventional model is used in obtaining i its discretized version. But, it has errors since the characteristics of SVPWM and time delay are not taken i into consideration. In this paper, the new reference frame model of a 3c~ PWJVI converter is proposed C considering these problems. Also, the direct digital current controller based on this model is designed without a any extra algolithm. A simple tuning algorithm for the proposed current controller is given to compensate the i inductaηce mismatch problem. Then simulation and experimental results show the validity of the algolithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.107-114
• /
• 2014

This paper applies a compensated low pass filter (LPF) to current measurements for permanent magnet synchronous motor (PMSM) drives. The noise limits the bandwidth of current controllers and has more adverse influences on control performances under the light load condition because of the low signal-to-noise ratio. In order to eliminate the noise sensitivity, this paper proposes a digital LPF with a compensator of gain attenuation and phase delay which are unacceptable in current information for PMSM drives. Characteristics of the proposed LPF are analyzed in comparison with the general LPFs. The compensated LPF is basically designed by the orthogonal property of the measured currents in the ${\alpha}{\beta}$ stationary reference frame. In addition, an implementation issue of the proposed method is discussed. Experimental results using the proposed method show improvements of the current control performance from two perspectives, rapid step responses and reductions of harmonic distortion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4242-4263
• /
• 2017

Multi-User Multiple-Input Multiple-Output (MU-MIMO) technology has recently attracted significant attention from academia and industry because of it is increasingly important role in improving networks' capacity and data rate. Moreover, MU-MIMO systems for the Fifth Generation (5G) have already been researched. High Quality of Service (QoS) and efficient operations at the Medium Access Control (MAC) layer have become key requirements. In this paper, we propose a downlink MU-MIMO MAC protocol based on adaptive Channel State Information (CSI) feedback (called MMM-A) for Wireless Local Area Networks (WLANs). A modified CSMA/CA mechanism using new frame formats is adopted in the proposed protocol. Specifically, the CSI is exchanged between stations (STAs) in an adaptive way, and a packet selection strategy which can guarantee a fairer QoS for scenarios with differentiated traffic is also included in the MMM-A protocol. We then derive the expressions of the throughput and access delay, and analyze the performance of the protocol. It is easy to find that the MMM-A protocol outperforms the commonly used protocols in terms of the saturated throughput and access delay through simulation and analysis results.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4E
• /
• pp.167-175
• /
• 2003

Shear wave velocity was measured and grain size analysis was conducted on two core samples obtained in unconsolidated marine sediments of the western continental margin, the East Sea. A pulse transmission technique based on the Hamilton frame was used to measure shear wave velocity. Duomorph ceramic bender transducer-receiver elements were used to generate and detect shear waves in sediment samples. Time delay was calculated by changing the sample length from the transducer-receiver element. Time delay is 43.18 μs and shear wave velocity (22.49 m/s) is calculated from the slope of regression line. Shear wave velocities of station 1 and 2 range from 8.9 to 19.0 m/s and from 8.8 to 22 mis, respectively. Shear wave velocities with depth in both cores are qualitatively in agreement with the compared model〔1〕, although the absolute value is different. The sediment type of two core samples is mud (mean grain size, 8-9Φ). Shear wave velocity generally increases with sediment depth, which is suggesting normally consolidated sediments. The complicated variation of velocity anisotropy with depth at station 2 is probably responsible for sediment disturbance by possible gas effect.