• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.149-157
• /
• 2002

This paper is to investigate collapse mechanisms of CFRP(Carbon Fiber Reinforced Plastics)composite tubes and to evaluate collapse characteristics on the change of interlaiminar number and ply orientation angle of outer under static and impact axial compression loads. When a CFRP composite tube is crushed, static/impact energy is consumed by friction between the loading plate and the splayed fronds of the tube, by fracture of the fibers, matrix and their interface. These are associated with the energy absorption capability. In general, CFRP tube with 6 interlaminar number(C-type), absorbed more energy than other tubes(A, B, D-types). The maximum collapse load seemed to increase as the interlaminar number of such tubes increases. The collapse mode depended upon orientation angle of outer of CFRP tubes and loading status(static/impact). Typical collapse modes of CFRP tubes are wedge collapse mode, splaying collapse mode and fragmentation collapse mode. The wedge collapse mode was shown in case of CFRP tubes with 0° orientation angle of outer under static and impact loadings. The splaying collapse mode was shown in only case of CFRP tubes with 90°orientation angle of outer under static loadings, however in Impact tests those were collapsed in fragmentation mode .

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.1
• /
• pp.107-115
• /
• 1997

We studied the effects of bile acids on the induction ofapoptosis in HepG2 human hepatocellular carcinoma cells. Treatment with either ursodeoxycholic acid (UDCA) or lithocholic acid (LCA) resulted in a dose- and time-dependent decrease in cell viability assessed by MTT assay. Both UDCA and LCA also induced genomic DNA fragmentation, a hallmark of apoptosis, indicating that the mechanism by which these bile acids induce cell death was through apoptosis. Cycloheximide, a protein synthesis inhibitor, blocked the apoptosis induced by these bile acids, implying that new protein synthesis may be required for the apoptosis. Intracellular $Ca^{2+}$ release blockers (dantrolene and 3,4,5-trimethoxybenzoic acid-8-(diethylamino)octyl ester) inhibited decreased cell viability and DNA fragmentation induced by these bile acids. Treatment of HepG2 cells with calcium ionophore A23l87 induced DNA fragmentation. These results suggest that UDCA and LCA induce apoptosis in the HepG2 cells and that the activation of intracellular $Ca^{2+}$ signals may play an important role in the apoptosis induced by these bile acids.

• Biomedical Science Letters
• /
• v.12 no.4
• /
• pp.349-354
• /
• 2006

Induction of apoptosis allows the organism to get rid of abnormal cells and also of tumor cells. Understanding the mechanism involved in Ultraviolet radiation (UV) induced apoptosis may improve its therapeutic efficacy. In this study, we present expression of poly (ADP-ribose) polymerase (PARP) during apoptosis induced by UV in HeLa $S_3$ cells. Four different assays were performed in this study: morphological assessment of apoptotic cells and cell viability, DNA fragmentation analysis by agarose gel electrophoresis, quantitative assay of fragmented DNA, and expression of PARP by the western blot analysis. The percentages of apoptotic HeLa $S_3$ cells irradiated with $75J/m^2$ UV was increased continuously from 3 hrs incubation. DNA ladder pattern was appeared at 6 hrs. The amount of nucleosomal DNA fragments in cells treated UV increased from 3 to 12 hrs incubation and gradually decreased. The cleavage of PARP in HeLa $S_3$ cells irradiated with UV was induced, and the cleavage of PARP was more delayed in the cells pretreated with $5J/m^2$ UV and subsequently irradiated with $75J/m^2$ UV. than that in the cells only irradiated with $75J/m^2$ UV. Thus these data suggest that the cleavage of PARP relates with DNA fragmentation associated with apoptosis.

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.159-165
• /
• 2003

Objectives : Coptidis rhizoma (CR) is an oriental medicine that has been used in many traditional prescriptions against diabetes mellitus in Korea for centuries. Our purpose was to determine the protective effect and its action mechanism of CR on the cytotoxicity of pancreatic -cell line (RINm5F cell). Methods : In this experiment, we used methods such as MTT assay for detection of cytotoxicity, DNA fragmentation assay for detection of apoptotic cell death, LDH activity assay for detection of necrotic cell death, and measurement of $DiOC_{6}$ (3) retention for detection of mitochondrial membrane potential (MMP). Background : Nitric oxide (NO) is believed to playa key role in the process of pancreatic -cell destruction leading to insulin-dependent diabetes mellitus (IDDM). Results : Exposure of RINm5F cells to chemical NO donor such as S-nitroso-N-acetylpenicillamine (SNAP) induced cytotoxic events such as DNA fragmentation and lactate dehydrogenase (LDH) release into medium. However, pretreatment of RINm5F cells with CR extract ($10~50{\mu\textrm{g}}/ml$) for 3 hours prevented SNAP-induced DNA fragmentation and LDH release into medium through the inhibition of MMP disruption. Conclusions : These results suggest that CR may be a candidate for a therapeutic or preventing agent against IDDM.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.93-106
• /
• 1993

Fragmentation patterns on electron impact of 8 chlorinated organophosphorus pesticides were investigated. In most cases, characteristic ions could e identified and the peak clusters due to the $^{35}Cl$ and $^{37}Cl$ isotopes in the fragment ions were found to be highly characteristic. The fragmentation patterns of phosphorus moiety were coincident with previous report in the aspect of mechanism.

• BMB Reports
• /
• v.42 no.11
• /
• pp.713-718
• /
• 2009

Apoptotic DNA fragmentation, the hallmark of apoptosis, is mediated primarily by caspase-activated DFF40 (CAD) nuclease. DFF40 exists as a heterodimer with DFF45 (ICAD), which is a specific chaperone and inhibitor of DFF40 under normal conditions. To understand the mechanism through which the DFF40/DFF45 system is regulated, we analyzed the structural and biochemical properties of apoptotic DNA fragmentation mediated by DFF40/DFF45. Using limited proteolysis, we show that residues 1-281 of DFF45 form a rigid, crystallized domain, whereas the loop formed by residues 277-281 is accessible by trypsin. These results show that the C-terminal helix formed by residues 281-300 is dynamic and necessary for the chaperone activity of DFF45, but not for inhibition of DFF40.

• Journal of Veterinary Clinics
• /
• v.16 no.1
• /
• pp.100-107
• /
• 1999

Apoptosis is now widely recognized as a common form of cell death and represents mechanism of cell clearance in many physiological situations where deletion of cells is required. In vivo administration of bacterial lipopolysaccharide (LPS) to Balb/c mice induced DNA fragmentation in the thymus. DNA fragmentation in the thymus was roughly dependent on the dose of LPS injected and reached the peak 18 hours after injection. This apoptosis in the thymus might be mediated due to LPS stimulant. DEN (diethylnitrosamine) has been shown to cause liver cancer in experimental animals and humans. The hepatic tumorigenesis was induced by ad libitum feeding of DEN only. It was suggested that DEN induced hepatic tumorgenesis in rat is a good reproducible model for studying biochemical and pathophysiological changes associated with the development of hepatic tumorigenesis and apoptosis.

• Composites Research
• /
• v.13 no.4
• /
• pp.54-66
• /
• 2000

Interfacial and microfailure properties of carbon fiber/epoxy matrix composites were evaluated using both tensile fragmentation and compressive Broutman tests with an aid of acoustic emission (AE) monitoring. A polymeric maleic anhydride coupling agent and a monomeric amino-silane coupling agent were used via the electrodeposition (ED) and the dipping applications, respectively. Both coupling agents exhibited significant improvements in interfacial shear strength (IFSS) compared to the untreated case under tensile and compressive tests. The typical microfailure modes including fiber break of cone-shape, matrix cracking, and partial interlayer failure were observed during tensile test, whereas the diagonal slippage in fiber ends was observed under compressive test. For both loading types, fiber breaks occurred around just before and after yielding point. In both the untreated and treated cases AE amplitudes were separately distributed for the tensile testing, whereas they were closely distributed for the compressive tests. It is because of the difference in failure energies of carbon fiber between tensile and compressive loading. The maximum AE voltage for the waveform of carbon or basalt fiber breakages under tensile tests exhibited much larger than those under compressive tests, which can provide the difference in the failure energy of the individual failure processes.

• YAKHAK HOEJI
• /
• v.23 no.3_4
• /
• pp.167-171
• /
• 1979

It is knwon that in the reaction of .alpha.-diethylaminoacetophenone with potassium cyanide and ammonium carbonate in dilute alcohol solution, 5-phenylhydantoin is formed. In this study the mechanism of the reaction by which diethylaminomethyl group is eliminated, was investigated with applying GC/MS-system. From the fragmentation pattern of mass spectrum of the unknwon compound, which has mol peak 112, it was identified as diethylaminoacetonitrile. According to our GC/MS study of the reaction mixture, it seems likely that diethylaminomethyl group is eliminated neither through the alkali degradation of .alpha.-diethylaminoacetophenone to aldehyde nor after the anticipated hydantoin formation. But it is believed that in the course of ring formation through an unidentified mechanism diethylaminomethyl group is eliminated.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.977-995
• /
• 2017

It is well accepted that rock failure mechanism influence the cutting efficiency and determination of optimum cutting parameters. In this paper, an attempt was made to research the factors that affect the failure mechanism based on discrete element method (DEM). The influences of cutting depth, hydrostatic pressure, cutting velocity, back rake angle and joint set on failure mechanism in rock-cutting are researched by PFC2D. The results show that: the ductile failure occurs at shallow cutting depths, the brittle failure occurs as the depth of cut increases beyond a threshold value. The mean cutting forces have a linear related to the cutting depth if the cutting action is dominated by the ductile mode, however, the mean cutting forces are deviate from the linear relationship while the cutting action is dominated by the brittle mode. The failure mechanism changes from brittle mode with larger chips under atmospheric conditions, to ductile mode with crushed chips under hydrostatic conditions. As the cutting velocity increases, a grow number of micro-cracks are initiated around the cutter and the volume of the chipped fragmentation is decreasing correspondingly. The crack initiates and propagates parallel to the free surface with a smaller rake angle, but with the rake angle increases, the direction of crack initiation and propagation is changed to towards the intact rock. The existence of joint set have significant influence on crack initiation and propagation, it makes the crack prone to propagate along the joint.