• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.3
• /
• pp.196-204
• /
• 2002

For the study of its stability when the screw has been fixed after sagittal split ramus osteotomy(SSRO) of the mandible, the methods of screw arrangement are classified into two types, triangular and straight. The angles of screws to the bone surface are classified as perpendicular arrangements, the $60^{\circ}$ anterioinferior screw, known as triangular, and the most posterior screw, called straight arrangement, thus there are four types. The finite element method model has been made by using a three dimensional calculator and a supercomputer. The load directions are to the anterior teeth, premolar region, and molar region, and the bite force is 1 Kgf to each region. The distribution of stress, the von-Mises yield strength, and safety of margin refer to the total sum of transformed energy have been studied by comparison with each other. The following conclusion has been researched : 1. When shear stress is compared, in the triangular arrangement in the form of "ㄱ", the anterosuperior screw is seen at contributing to the support of the bone fragment. In the straight arrangement, substantial stress is seen to be concentrated on the most posterior angled screw. 2. When the von-Mises yield strength is compared, it seemed that the stress concentration on the angled anteroinferior screw is higher, it shows a higher possibility of fracture than any other screw. In the straight arrangement, stress appeared to be concentrated on the most posteriorly angled screw. 3. When the safety margins of the transfomed energy are compared, the energy conduction is much greater in the case of the angled screw than in the case of the perpendicular screw. The triangular arrangement in the form of "ㄱ" shows a superior clinical sign to that of the straight arrangement. Judging from the above results, when the screw fixation is made after SSRO in practical clinical cases, two screws should be inserted in the superior border of mandibular ramus and a third screw of mandibular inferior border should be inserted in the form of triangular. All screws on the bony surface should be placed perpendicularly-$90^{\circ}$ angles apparently best promote bony support and stability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.381-386
• /
• 2010

As the vertical fracture occurs at the various locations following the long axis of a root, treatment method of crown-root fractured anterior teeth is decided according to the depth. If the fracture line is close to the crown, gingivectomy, orthodontic - forced eruption or surgical extrusion of apical fragment could be done. If the line is over 1/3 length of the root, the prognosis is poor and extraction is usually undertaken. However, extraction of maxillary incisor at growing children causes many complications such as esthetic, phonetic problem and alveolar bone resorption. Therefore, preservation of tooth is the highest priority. Recently, intentional replantation with composite resin could be considered as alternative treatment of crown-root fractured anterior tooth. This report presents a patient in mixed dentition with deep vertical crown-root fracture of the maxillary permanent central incisors by trauma. Intentional replantation of the fractured teeth was performed using composite resin. After 2 years, specific clinical symptom has not been found and the patient was satisfied of esthetic result. This method suggests the new technique to preserve a tooth as an alternative to extraction, although it is technically sensitive and the reports of long-term prognosis is insufficient.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.3
• /
• pp.308-314
• /
• 2000

Background : DNA fingerprinting of Mycobacterium tuberculosis with RFLP is a very useful tool for deciphering the molecular epidemiology of tuberculosis. An international comparison of the RFLP pattern became possible with the proposal to standardize RFLP methodology using Pvu-II restricted IS-6110, and the comparison has noted some predominance of RFLP pattern in East Asia. The RFLP patterns of tuberculosis strains collected at SNUH was studied and was compared with other strains from East Asia. Method : Fifty strains of M. tuberculosis were isolated from patients who visited 'or were admitted to the SNUH in 1998. Some isolates belonging to the Beijing family were also received. After the extraction of DNA from M. tuberculosis isolates, the chromosomal DNAs were digested with Pvu-II and analyzed by the Southern blot method with DNA probe to IS6110. Result : Six strains belonged to the Beijing family. The RFLP patterns of other 9 strains were similar to each other. No statistically significant endobronchial tuberculosis, presence of underlying disease. and the province of residence were found. Conclusion : Few groups of M. tuberculosis strains from SNUH showed similar RFLP patterns, but their clinical implications are not yet clear.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.717-724
• /
• 2010

The flash point is one of the most important physical properties used to determine the potential for fire and explosion hazards of flammable liquids. Despite the needs of the experimental flash point data for the design and construction of chemical plants, there is often a significant gap between the demands for the data and their availability. This study have built and compared two models of partial least squares(PLS) and support vector machine(SVM) to predict the experimental flash points of 893 organic compounds out of DIPPR 801. As the independent variables of the models, 65 functional groups were chosen based on the group contribution method that was oriented from the assumption that each fragment of a molecule contributes a certain amount to the value of its physical property, and the logarithm of molecular weight was added. The prediction errors calculated from cross-validation were employed to determine the optimal parameters of two models. And, an optimization technique should be used to get three parameters of SVM model. This work adopted particle swarm optimization that is one of heuristic optimization methods. As the selection of training data can affect the prediction performance, 100 data sets of randomly selected data were generated and tested. The PLS and SVM results of the average absolute errors for the whole data range from 13.86 K to 14.55 K and 7.44 K to 10.26 K, respectively, indicating that the predictive ability of the SVM is much superior than PLS.

• Journal of Aquaculture
• /
• v.19 no.3
• /
• pp.166-172
• /
• 2006

Induced androgenesis, a form of artificial parthenogenesis is an important tool for the generation and use of genetically isogenic or clonal fish strain. An optimized protocol for the genetic inactivation of mud loach (Misgurnus mizolepis) oocytes (i.e. production of androgenetic haploid) was developed using UV-irradiation. Various dose levels of UV significantly affected the fertilizing capacity of the eggs, hatchability of embryos and incidence of haploidy. Based on the extensive examinations of treatment conditions on embryo viability and haploid incidence, the optimum dose level of UV irradiation was turned out to be $10,800ergs/mm^2$ with 56.9% of hatching success and 94.6% of haploidy. The overall yield of putative androgen under optimized treatment condition was more than 50% out of total eggs inseminated. The success of androgenetic reproduction of haploid genome was verified by flow cytometry and PCR amplification of transgene that is exclusive to either one of parental sexes. However, a small portion $(8\sim11%)$ of presumed androgenetic haploid larvae was proven to contain residual DNA fragment(s) from maternal parent.

• Clinical and Experimental Reproductive Medicine
• /
• v.33 no.2
• /
• pp.97-104
• /
• 2006

Objective: To investigate whether polymorphism of Catechol-O-methyltransferase(COMT) gene is associated with the risk of polycystic ovary syndrome (PCOS) in Korean women. Methods: One hundred and thirty-six PCOS patients and eighty four controls were enrolled. Blood samples were collected from the patients diagnosed according to the 2003 revised criteria of the Rotterdam ESHRE/ASRM-sponsored PCOS consensus workshop group. Age matched women with regular menstruation from same geographic region were recruited as control subject. Polymerase chain reaction (PCR) and restriction fragment length polymorphism (RFLP) of PCR products were done to determine all individuals' genotype. Results: In women with $COMT^{LL}$ genotype, there was decreased PCOS risk and this difference was statistically significant (OR 0.24, 95% CI 0.11~0.51). Conclusion: The results suggest that the $COMT^{LL}$ genetic polymorphism might be associated with PCOS risk in Korean women.

• YAKHAK HOEJI
• /
• v.55 no.2
• /
• pp.106-115
• /
• 2011

Systematic toxicological analysis (STA) means the process for general unknown screening of drugs and toxic compounds in biological fluids. In order to establish STA, in previous study we investigated pattern of drugs & poisons in autopsy cases during 2007~2009 in Korea, and finally selected 62 drugs as target drugs for STA. In this study, rapid and simple drug identification and quantitative analytical program by gas chromatography-mass spectrometry(GC-MS) was developed. The in-house program, "DrugMan", consisted of modified chemstation data analysis menu and newly developed macro modules. Total 55 drugs among 62 target drugs were applied to this program, they were 14 antidepressants, 8 anti-histamines, 5 sedatives/hypnotics, 5 narcotic analgesics, 3 antipsychotic drugs, and etc. For calibration curves, fifty five drugs were divided into four groups of range considering their therapeutic or toxic concentrations in blood specimen, i.e. 0.05~1 mg/l, 0.1~1 mg/l, 0.1~5 mg/l or 0.5~10 mg/l. Standards spiked bloods were extracted by solid-phase extraction (SPE) with trimipramine-D3 as internal standard. Parameters such as retention times, 3 mass fragment ions, and calibration curves for each drug were registered to DrugMan. A series of identification, semi quantitation of target drugs and reporting the results were performed automatically. Calibration curves for most drugs were linear with correlation coefficients exceeding 0.98. Sensitivity rate of DrugMan was 0.90 (90%) for 55 drugs at the level of 0.5 mg/l. For standard spiked bloods at the level of 0.5 mg/l for 29 drugs, semi quantitative concentrations were ranged 0.36~0.64 mg/l by DrugMan. If more drugs are registered to database in DrugMan in further study, it will be useful tools for STA in forensic toxicology.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.1-12
• /
• 2016

This study reports the results about the petrography of volcanic rocks in Namoo island and Namhyeongje island, off the southern coast of Busan City. The rocks in the Namhyeongje island composed of dacitic crystal-vitric welded tuff, showing phenocrysts of plagioclase, rock fragment with flow structure of elongated and flattened pumice fragments. In thin section it shows pyroclastic texture. The volcanic rocks in Namoo island are mainly dark grey-bluish dacite with phenocrysts of plagioclase and gradually changed to pink-greyish rhyodacite with auto-brecciated. In the northeastern part of the island, the volcanic rocks occurred as aggromerate with a poorly sorted mixture of blocks, lappili and ash and felsic feeder dike intrude the aggromerate. Major element composition of the volcanic rocks in Namhyeongje island and Namoo island are $SiO_2$ 73.6~74.4 wt.% and 65.5~68.3 wt.%, respectively. The volcanic rocks in these island are felsic volcanic rocks.

• Conservation Science in Museum
• /
• v.7
• /
• pp.53-62
• /
• 2006

The wooden armor frame and various lacquerware artifacts excavated from the low swamp remains in Imdang, Gyeongsan have very weak material and lacquer coating; in case they are exposed in the air, they are likely to be shrunken and deformed immediately. The wooden armor frame has large size and it might be dissolved during freeze-drying. The lacquer coating of lacquerware blocks the penetration of chemicals and it is very likely to swell or peel off during the treatment. Therefore, to prevent the dissolution during vacuum freeze-drying, the wooden armor frame was replaced with t-butanol and impregnated in t-butanol solution with PEG#3, 350 43%, and lacquerware was impregnated in PEG#3, 350 40% solution at room temperature and freeze-dried. According to the analysis of the lacquer fragment from the lacquerware, the lid and the mounted cup was pasted with the mixture of lacquer and black pigment (soot) on the base layer after the first coating and pasted two or three times more with natural lacquer; the red lacquered wooden cup was pasted with the mixture of lacquer and black pigment on the base layer and pasted once on the middle layer. The top lacquer (red) was pasted with the mixture of iron oxide(Fe₂O₃).

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.83-86
• /
• 2015

Nowadays the weapon systems are employed air bursting munition (ABM) as smart programmable 40 mm shells which have been developed in order to hit the target with programmed munition that can be air burst after a set distance in the battlefield. In order to improve the accuracy of such a bursting time, by measuring the speed of the munition from the barrel, weapon systems calculate the exact time of flight to the target and then the time information must be inputted to the munition. In this study, we introduce a device capable of detecting a shot at K4 40 mm automatic grenade. The shot is composed of a rotating copper band to convert linear motion into rotary motion when it passes through the barrel, the steel section is exert the effect of fragment and aluminum section to give fuze information. The aluminum section was used to detect munition using eddy current method. To measure muzzle velocity by means of non-contact method, two eddy current probes separated 10 cm was employed. Time interval between two eddy current probe detection times was used as muzzle velocity. The eddy current probe was fabricated U-shape Mn-Zn ferrite core with enamelled copper wire, and 200 kHz alternating current was used to detect inductance change. Measured muzzle velocity using the developed sensor was compared to the Doppler radar system. The difference was smaller than 1%.