• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권1호
• /
• pp.69-77
• /
• 1989

This is a retrospective study on 219 patients with mandibular fracture. The patients were treated in the Dept. of Oral Maxillofacial Surgery of WON KWANG UNIV. HOSPITAL from Aug. 1, 1984 to Sept. 30. 1988. The results were as follows. 1. The mandibular fractures occured most frequently in the twenties(35%) and male were predominant (74.7%) than females. 2. The most frequent etiologic factor was traffic accident(34.3%). 3. The most common location of fracture was symphysis(37.1%). And angle(27.6%), condyle(25.7%), ramus(1.6%) were next in order of frequency. 4. In mandible fracture, they have an average 1.8 fracture line. 5. The use of plate & screw system were more increased in the comparison of each year. 6. Intermaxillary fixation period was more reduced from the concept of 6 weeks fixation, due to the use of Plate & screw system. 7. Postoperative acute wound infection was developed 9.6% in 219 mandibular fracture patients. The compression osteosynthesis was most common cause of acute wound infection than any other treatment method. 8. Postoperative malocclusion was developed 4% in 219 mandibular fracture. And the compression osteosynthesis was most common cause of malocclusion. 9. Acute wound infection was detailed by the approach method. The Intraoral & extraoral combination method was most common cause on acute infection and intraoral, extraoral approach method was next in order of frequency. 10. Normal mouth opening process was proportioned to IMF period. The short IMF period have a fast normal mouth opening process.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.649-654
• /
• 2004

In this paper, the fracture toughness and mechanisms of failure in a random SiC-whisker/$Al_{2}O_3$ ceramic composite were investigated using in situ observations during mode I(opening) loading. $SiC_{w}/Al_{2}O_3$ composite was obtained by hot press sintering of $Al_{2}O_3$ powder and SiC whisker as the matrix and reinforcement, respectively. The whisker and powder were mixed using a turbo mill. The composite was produced at SiC whisker volume fraction of $0.3\%$. Compared with monolithic $Al_{2}O_3$, fracture toughness enhancement was observed in $SiC_{w}/Al_{2}O_3$ composite. This improved fracture toughness was attributed to SiC whisker bridging and crack deflection. $SiC_{w}/Al_{2}O_3$ composite exhibited typically brittle fracture behavior, but a fracture process zone was observed in this composite. This means that the load versus load-line displacement curve of $SiC_{w}/Al_{2}O_3$ composite from a fracture test may involve a small non-linear region near the peak load.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.98-104
• /
• 2006

In this paper, for the purpose of investigation the acoustic emission(AE) behaviors during resistance spot welding process and tension test of spec steels. As the results present the resistance spot welding method that can get suitable welding qualities or structural integrity estimating method. The resistance spot welding process consists of several stages: set-down of the electrodes; squeeze; current flow; forging; hold time; and lift-off. Various types of AE signals are produced during each of these stages. For tensile-shear test and cross tensile test in resistance spot welded specimens, fracture pa 야 ems are produced: tear fracture; shear fracture; and plug fracture. Tensile-shear specimens strength appeared higher than cross tensile specimens one. In case of tensile-shear specimen happened tear fracture that crack happens in most lower plate. Also, in case of cross tensile specimens, upper plate and lower plate are detached perfect fracture was exposed increases a little as acting force is lower than ordinary welding condition. Therefore, the structure which is combined by resistance spot welding confirmed that welding design must attain so that shear stress may can interact mainly.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.30-35
• /
• 2002

The fractal geometry is a non-Euclidean geometry which describes the naturally irregular or fragmented shapes, so that it can be applied to fracture behavior of materials to investigate the fracture process. Fractal curves have a characteristic that represents a self-similarity as an invariant based on the fractal dimension. This fractal geometry was applied to the crack growth of cementitious composites in order to correlate the fracture behavior to microstructures of cementitious composites. The purpose of this study was to find relationships between fractal dimensions and fracture energy. Fracture test was carried out in order to investigate the fracture behavior of plain and fiber reinforced cement composites. The load-CMOD curve and fracture energy of the beams were observed under the three point loading system. The crack profiles were obtained by the image processing system. Box counting method was used to determine the fractal dimension, D$_{f}$. It was known that the linear correlation exists between fractal dimension and fracture energy of the cement composites. The implications of the fractal nature for the crack growth behavior on the fracture energy, G$_{f}$ is apparent.ent.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.211-221
• /
• 1999

A method to determine the fracture energy of concrete is investigated. The fracture energy may be calculated from the area under the complete load-deflection curve which can be obtained from a stable three-point bend test. Several series of concrete beams have been tested. The Present experimental study indicates that the fracture energy decreases as the initial notch-to-beam depth ratio increases Some problems to be observed to employ the three-point bend method are discussed. The appropriate ratio of initial notch-to-beam depth to determine the fracture energy of concrete is found to be 0.5. It is also found that the influence of the self-weight of a beam to the fracture energy is very small A simple and accurate formula to predict the fracture energy of concrete is proposed.

• 대한정형외과스포츠의학회지
• /
• 제11권2호
• /
• pp.96-98
• /
• 2012

경추 또는 흉추의 극돌기에 단독으로 발생하는 골절을 Clay shoveler 골절이라 한다. 이 골절이 스포츠 활동 중에 발생하는 경우는 매우 드물다. 본 증례에서는 27세 남성으로 반복적인 골프 스윙으로 인하여 제 7경추 극돌기에 골절이 발생하였다. 환자는 진통제, 근육이완제 복용과 4주간의 토마스 칼라를 착용하였다. 통증은 호전되었고, 수상 후 5개월 째에 다시 골프를 시작하였다.

• 콘크리트학회논문집
• /
• 제13권6호
• /
• pp.568-574
• /
• 2001

콘크리트 시험편에 대한 삼점휨실험을 실시하여 여러 실험에 대해 측정된 반응의 평균값을 계산하곤 계산된 평균거동으로부터 삼점휨 시험편이 완전히 파손될 때까지 연속적으로 성장하는 균열에 대한 파괴거동이 분석되었다. 이 연구에서 사용된 실험변수는 25.4mm와 6.4mm의 초기균열길이 그리고 2000sec와 20sec의 실험기간이며, 초기균열길이는 파괴진행대(FPZ) 크기의 영향과 시험편의 기하학적 특성 및 경계조건에 대한 영향을 분석하기 위한 것이다. 실험기간은 초기 크리프(creep)의 영향을 위해 설정되었으나, 이 연구의 하중점-변위 속도에서는 심각한 영향이 관측되지 않았다. 여러 실험의 평균 외부일로부터 평균하중이 계산되었으며, 변형률 게이지를 사용하여 평균 균열길이를 측정하였다. 최대하중 이전의 저항곡선은 파괴진행대의 크기에 대해 유사한 값을 보였다. 그러나 최대하중 직후에는 초기균열의 크기에 관계없이 0.088~0.154mm의 하중점-변위에서 88mm의 불안정 균열성장이 발생되었으며, 평균 파괴에너지율 $G_{F}$$^{ave}$ = 115N/m은 이 불안정 균열성장 동안에 발생되었다. 균열길이 111mm에서 완전한 파괴진행대가 형성되었고, 25.4mm와 6.4mm의 초기균열길이에 대해 파괴진행대의 크기는 각각 86mm와 105mm이었다. 완전한 파괴진행대의 형성이후 저항곡선의 평균 파괴에너지율은 25.4mm와 6.4mm의 초기균열길이에 대해 각각 229N/m로 284N/m로 $G_{F}$$^{ave}$의 두 배 이상이었다.이었다.이었다.

• Computers and Concrete
• /
• 제16권6호
• /
• pp.933-961
• /
• 2015

Damage by high-speed impact fracture is a dominant mode of failure in several applications of concrete structures. Numerical modelling can play a crucial role in understanding and predicting complex fracture processes. The commonly used mesh-based Finite Element Method has difficulties in accurately modelling the high deformation and disintegration associated with fracture, as this often distorts the mesh. Even with careful re-meshing FEM often fails to handle extreme deformations and results in poor accuracy. Moreover, simulating the mechanism of fragmentation requires detachment of elements along their boundaries, and this needs a fine mesh to allow the natural propagation of damage/cracks. Smoothed Particle Hydrodynamics (SPH) is an alternative particle based (mesh-less) Lagrangian method that is particularly suitable for analysing fracture because of its capability to model large deformation and to track free surfaces generated due to fracturing. Here we demonstrate the capabilities of SPH for predicting brittle fracture by studying a slender concrete structure (column) under the impact of a high-speed projectile. To explore the effect of the projectile material behaviour on the fracture process, the projectile is assumed to be either perfectly-elastic or elastoplastic in two separate cases. The transient stress field and the resulting evolution of damage under impact are investigated. The nature of the collision and the constitutive behaviour are found to considerably affect the fracture process for the structure including the crack propagation rates, and the size and motion of the fragments. The progress of fracture is tracked by measuring the average damage level of the structure and the extent of energy dissipation, which depend strongly on the type of collision. The effect of fracture property (failure strain) of the concrete due to its various compositions is found to have a profound effect on the damage and fragmentation pattern of the structure.

• 콘크리트학회지
• /
• 제7권4호
• /
• pp.149-156
• /
• 1995

경량기포콘크리트(ALC : Autoclaved Lightweight Concrete)의 내구성을 개선하기 위하여 투숩 및 투수, 편면동결융해 특성과 탄산화 특성을 실험하였다. 국산 ALC전용마감재는 방수용 도장재에 가까운 투습 및 투수성질을 갖고 있어 특성의 개선이 요구된다. 편면동결융해시험에서 마감재의 투습도에 따른 열화위치는 투습도가 클수록 외측에서 발생하였으나 투수에 의한 외부의 박리열화는 관찰되자 않았다. 탄산화는 수분의 함량이 작을수록 빠르게 진행되었으며 탄산화가 진행됨에 따라 기공량은 감소하였다. 탄산화가 완전히 진행되면 부피의 팽창으로 균열이 발생하였다.

• 콘크리트학회지
• /
• 제6권3호
• /
• pp.201-214
• /
• 1994

본 연구는 콘크리트용 혼화재로서 우리나라에 풍부한 천연 실리카 질 광물을 이용하여 콘크리트의 강도증진 가능성 및 유용성과 경제적인 효율성에 대해 검토한 것이다. 제반 실험을 통해 얻어진 결론을 요약하면 다음과 같다. \circled1 최적의 제오라이트 치환율은 단위 시멘트당 5~10% 정도를 나타났으며, 그 때의 강도 증진율은 무첨가 콘크리트 값에 비해 대체적으로 40%정도의 강도증진 효과를 얻었다. \circled2 최적의 이암 치환율은 단위 시멘트량당 10~15% 정도로 나타났으며, 그때의 강도 증진율은 무첨가 콘크리트 값에 비해 대체적으로 10%정도의 강도증진 효과를 얻었다. 이러한 검토로부터 우리는 혼화재로서 콘크리트의 강도성능의 향상을 목적으로 기존의 실리카 흄, 플라이 애쉬 등의 대체품으로 천연 실리카 광물을 활용할 수 있다는 결론을 얻었다.