• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.125-130
• /
• 2003

This paper provides approximate J estimates for off-centred, circumferential through-wall cracks in cylinders under bending. The proposed method is based on the reference stress approach, where the dependence of elastic and plastic influence functions of J on the cylinder/crack geometry, the off-centred angle and strain hardening is minimised through the use of a proper normalising load. Based on published limited FE results for off-centred, circumferential through-wall cracks under bending, such normalising load is found, based on which the reference stress based J estimates are proposed for more general cases, such as for a different cylinder geometry. Comparison of the estimated J with extensive FE J results shows overall good agreements for different crack/cylinder geometries which provides sufficient confidence in the use of the proposed method to fracture mechanics analyses of off-centred circumferential cracks. Furthermore, the proposed method is simple to use, giving significant merits in practice.

• Advances in concrete construction
• /
• 제2권3호
• /
• pp.229-247
• /
• 2014

A numerical study of the influence of shear-span/depth ratio on the cohesive crack fracture parameters and double - K fracture parameters of concrete is carried out in this paper. For the study the standard bending specimen geometry loaded with four point bending test is used. For four point loading, the shear - span/depth ratio is varied as 0.4, 1 and 1.75 and the ao/D ratio is varied from 0.2, 0.3 and 0.4 for laboratory specimens having size range from 100 - 500 mm. The input parameters for determining the double - K fracture parameters are taken from the developed fictitious crack model. It is found that the cohesive crack fracture parameters are independent of shear-span/depth ratio. Further, the unstable fracture toughness of double-K fracture model is independent of shear-span/depth ratio whereas, the initial cracking toughness of the material is dependent on the shear-span/depth ratio.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.345-350
• /
• 2001

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. 1T-CT specimen was used to obtain fracture resistance curves. But the fracture resistance curve by the 1T-CT specimen was very conservative to evaluate the integrity of the structure. And fracture resistance curve was affected by the specimen geometry and crack plane orientation. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the 1T-CT specimen and to provide the additional safety margin. For these, the fracture tests using the real pipe specimen and standard 1T-CT specimen test were performed. 4-point bending jig was manufactured for pipe test and direct current potential drop method was used to measure the crack extension and length for pipe test. From the pipe and the 1T-CT specimen test results, it was observed that the J-integral of the 1T-CT specimen test at the crack initiation point was very small compare to that of the pipe specimen test.

• 지질공학
• /
• 제14권1호
• /
• pp.29-46
• /
• 2004

균열을 따른 지하수 유동은 균열 기하양상에 의해 속도와 유동형태가 결정되므로, 암반 내 지하수 유동특성 해석 시 유동경로 역할을 하는 균열의 기하양상을 정확하게 파악하는 것은 중요하다. 그러나, 실제 현장규모에서는 노두의 불연속적 분포와 지표 하 정보의 연속적 획득이 불가능하기 때문에 전체적인 균열 정보를 얻기 어렵다. 따라서, 해석대상 균열 전체양상을 표현할 수 있는 방법의 개발이 요구된다. 이 연구는 퓨리에 변환을 토대로 해석대상 균열의 전체 기하양상을 파악하는 방법을 개발하고자 새로운 접근을 시도하였다. 시추코아로부터 해석대상 균열을 따라 시료를 채취한 후, 각 시료별로 퓨리에 변환을 통해 거칠기 구성성분 중 영향력이 큰 성분을 선택하였다. 그리고, 선정된 성분들을 평균하여 평균 스펙트럼을 구하였다. 평균 스펙트럼은 각 시료의 모든 성분을 포함하고 있으므로, 해석 대상 균열의 거칠기 성분 중 대표성분을 나타낸다. Low pass filtering을 수행한 후, 퓨리에 역변환을 실시하여 평균화 된 전체 균열의 거칠기 형상을 재현하였다. 재현된 거칠기 형상 또한 각 시료의 전체 기하특성을 포함하는 해석대상 지표하 균열의 대표적 거칠기 양상을 나타내는 것이다. 또한, 이는 규모확장을 통한 균열 전체의 거칠기 양상을 의미하는 것이다. 해석대상 균열을 따른 투수계수 특성을 파악하기 위해 재현된 거칠기 양상을 바탕으로 균열모델을 구성하였다. 투수계수는 균열 기하특성을 최대한 반영하여 정확한 투수계수를 구할 수 있는 균질화 해석법을 통해 산정 하였다. 해석결과는 $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$ 범위의 투수계수 분포를 보이는데, 이는 큰 규모의 균열을 따른 투수계수 값이라 할 수 있다. 이러한 시도는 전술한 바와 같이 제한된 단속적 균열정보를 이용해 해석대상의 균열전체에 대한 기하양상은 물론 투수계수를 산정 할 수 있는 방법이 될 것이다.도는 매립된 폐기물의 성상과 밀접한 관계를 보이며 해안가를 따라 매립되어 있는 지역의 토양 내 중금속의 용출은 주변 환경에 대한 잠재적인 환경위험을 결정 시 중요한 역할을 한다.로 제거할 수 있는 것으로 나타났다. 오염 지도에 근거하여 산출된 복원 물량에 대하여 토양세척법을 이용하는 경우 복원 비용을 산출하였으며, 이와 같은 자료는 고로폐광산 주변 오염 토양에 대한 실제 복원 공정의 설계에 중요한 자료로 활용될 수 있을 것으로 판단된다.om the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.643-649
• /
• 2003

본 연구의 목적은 부착실험 및 휨실험을 실시하여 구조용 합성섬유의 단면적 및 표면형상의 변화에 따른 부착성능과 휨성능을 평가하는 것이다. 6가지 다른 형상의 구조용 합성섬유를 조사하였고 부착 및 휨실험을 수행하였다. 6가지 형상의 구조용 합성섬유를 조사하였고 휨시험과 부착시험을 실시하였다. 실험변수는 3가지 종류의 형상과 2가지 종류의 단면적 변화로 하였다. 실험결과 구조용 합성섬유의 단면적이 동일할 때 주기 및 높이가 증가할수록 부착하중 및 인발 파괴 에너지는 감소하고 휨강도는 증가하였다. 또한 주기 및 높이가 일정할 섬유의 단면적이 증가할수록 인발하중과 인발 파괴 에너지는 증가하였고 휨강도는 감소하였다. 실험결과를 기본으로하여 콘크리트의 구조성능은 섬유의 부착성능 뿐만 아니라 콘크리트에 혼입되어 있는 섬유의 수, 인장하중에 저항할 수 있는 섬유의 재료특성 등에 복합적으로 영향을 받는 다는 것을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.467-471
• /
• 1998

A mathematical model is developed to predict the fatigue notch factor of butt welds subject to number of parameters such as weld geometry, residual stresses under dynamic combined loading conditions (tensile and bending). Linear elastic fracture mechanics, finite element analysis, dimensional analysis and superposition approaches are used for the modelling. The predicted results are in good agreement with the available experimental data. As a result, scatters of the fatigue data can be significantly reduced by plotting S-N curve as ($S{\cdot}K_f$) vs. N.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.409-416
• /
• 2009

Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

• Water Engineering Research
• /
• 제6권2호
• /
• pp.49-61
• /
• 2005

This paper presents the numerical study to examine characteristics of fluid flow and solute transport in a rough fracture subject to effective normal stresses. The aperture distribution is generated by using the self-affine fractal model. In order to represent a nonlinear relationship between the supported normal stress and the fracture aperture, we combine a simple mechanical model with the local flow model. The solute transport is simulated using the random walk particle following algorithm. Results of numerical simulations show that the flow is significantly affected by the geometry of aperture distribution varying with the effective normal stress level while it is slightly affected by the fractal dimension that determines the degree of the fracture surface roughness. However, solute transport is influenced by the effective normal stress as well as the fracture surface roughness.

• 대한치과의사협회지
• /
• 제53권5호
• /
• pp.307-317
• /
• 2015

Although the long-term success of osseointegrated endosseous implants for the support of fixed dental prostheses has been reported, the increasingly widespread use of implant-supported prostheses has led to problems associated with their structural integrity. The most common biomechanical complications observed in dental implant treatment are fracture and screw loosening. The nature of loosening or fracture of dental implant components is complex, since it involves fatigue, fitness, and varied chewing patterns and loads. To assess the service life of the components of the prosthetic system, a knowledge of the loads transmitted through the system is necessary. Design of the final restoration and occlusion in relation to the geometry of a prosthetic restoration has a great influence on the mechanical loading of the implant. It is proposed that control of force in oral cavity may play a larger role in failures than previously believed. Based on theoretic consideration and clinical experiences with dental implant, this article gives simple guidelines for controlling these loads.

• 한국안전학회지
• /
• 제6권3호
• /
• pp.50-55
• /
• 1991

It is well known that mechanisms of fracture and crack growth depend upon material characteristics such as fracture toughness, environmental condition, cracd geometry and mechanical properties. It seems to be very important to investihate the effects of the above factors on the behavior of structural components which contain flaws for the detailed evaluation of their intehrity. In this experimental research, fracture behaviors of moterials were investigated by using Acoustic Emission(AE) technique. The fracturing processes of materials were estimated through both the tension specimens. For the detrmlnatlon of yied strength or fracture toughness, the critical applied load at the crack initiation and propagation is thought to be very important. The critical applied load(PQ) was determined through AE signal. The source of AE signal was estimated by fractography analysis. These experimental results may contribute to the safety analyses and the evaluation of strength of structures.