• 제목/요약/키워드: fractional scheme

검색결과 142건 처리시간 0.023초

Bleed Slot을 사용한 응축충격파의 피동제어 (Passive Control of the Condensation Shock Wave Using Bleed Slots)

  • 백승철;권순범;김희동
    • 대한기계학회논문집B
    • /
    • 제26권7호
    • /
    • pp.997-1004
    • /
    • 2002
  • The current study describes experimental and computational works on the passive control of the steady and unsteady condensation shock waves, which are generated in a transonic nozzle. The bleed slots are installed on the contoured wall of the transonic nozzle in order 10 control the magnitude of the condensation shock wave and its oscillations. For computations, a droplet growth equation is copuled with two-dimensional Navier-Stokes equation systems. Computations are carried out using a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. An experiment using an indrafi transonic wind tunnel is made to validate the computational results. The current computations represented well the experimental flows. From both the experimental and computational results it is found that the magnitude of the condensation shock wave in the bleed slotted nozzle is signi ficantly reduced, compared with no passive control of solid wall. The oscillations of the condensation shock wave are successfully suppressed by a bleed slot system.

채널 임펄스 응답을 이용한 OFDM 시스템 시간 동기 (Timing Synchronization with Channel Impulse Response in OFDM Systems)

  • 강은수;한동석
    • 대한전자공학회논문지TC
    • /
    • 제44권7호통권361호
    • /
    • pp.53-58
    • /
    • 2007
  • OFDM(orthogonal frequency division multiplexing)은 페이딩 환경에서 높은 전송율을 가지는 효율적인 전송 기법이다. 그러나 OFDM 프레임의 시작 시점을 정확히 찾지 못하면 주파수 영역에서 위상회전으로 인해 수신 데이터의 비트오율이 높아진다. 그러므로 코히어런트 OFDM 시스템에선 정수배의 샘플 옵셋뿐만 아니라 소수배의 샘플 옵셋까지 동기를 획득해야 한다. 본 논문에서는 코히어런트 OFDM 시스템에서 수신된 훈련 심볼의 상관관계를 이용하여 0.5 샘플 이전과 이후의 충격응답을 각각 구하고 이들의 차를 이용하여 소수배 샘플 동기를 획득하는 알고리듬을 제안한다. 제안한 심볼 타이밍 동기 기법의 성능을 다중경로 채널과 잡음에 대한 모의실험을 통하여 검증한다.

IEEE 802.11n WLAN용 다중모드 LPDC 복호기의 최적 설계조건 분석 (An analysis of Optimal Design Conditions of Multi-mode LDPC Decoder for IEEE 802.11n WLAN System)

  • 박해원;나영헌;신경욱
    • 한국정보통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.432-438
    • /
    • 2011
  • IEEE 802.11n 표준에 제시된 3가지 블록길이(648, 1296, 1944)와 4가지 부호율(1/2, 2/3, 3/4, 5/6)을 지원하는 다중모드 LDPC(low density parity check) 복호기의 최적 설계조건을 분석하였다. 최소합 알고리듬과 layered 복호방식이 적용된 LDPC 복호기의 고정소수점(fixed-point) 시뮬레이션 모델을 Matlab으로 개발하였다. 고정소수점 시뮬레이션을 통해 복호기 내부 비트 폭, 정수 부분과 소수 부분의 비트 폭에 따른 복호 수렴속도를 분석하여 다중모드 LDPC 복호기의 하드웨어 구현을 위한 최적의 설계조건을 탐색하였으며, 블록길이와 부호율에 따른 복호성능을 분석하였다.

Numerical modelling for evaluating the TMD performance in an industrial chimney

  • Iban, A.L.;Brownjohn, J.M.W.;Belver, A.V.;Lopez-Reyes, P.M.;Koo, K.
    • Wind and Structures
    • /
    • 제17권3호
    • /
    • pp.263-274
    • /
    • 2013
  • A numerical technique for fluid-structure interaction, which is based on the finite element method (FEM) and computational fluid dynamics (CFD), was developed for application to an industrial chimney equipped with a pendulum tuned mass damper (TMD). In order to solve the structural problem, a one-dimensional beam model (Navier-Bernoulli) was considered and, for the dynamical problem, the standard second-order Newmark method was used. Navier-Stokes equations for incompressible flow are solved in several horizontal planes to determine the pressure in the boundary of the corresponding cross-section of the chimney. Forces per unit length were obtained by integrating the pressure and are introduced in the structure using standard FEM interpolation techniques. For the fluid problem, a fractional step scheme based on a second order pressure splitting has been used. In each fluid plane, the displacements have been taken into account considering an Arbitrary Lagrangian Eulerian approach. The stabilization of convection and diffusion terms is achieved by means of quasi-static orthogonal subscales. For each period of time, the fluid problem was solved and the geometry of the mesh of each fluid plane is updated according to the structure displacements. Using this technique, along-wind and across-wind effects have been properly explained. The method was applied to an industrial chimney in three scenarios (with or without TMD and for different damping values) and for two wind speeds, showing different responses.

INERTIAL EXTRAPOLATION METHOD FOR SOLVING SYSTEMS OF MONOTONE VARIATIONAL INCLUSION AND FIXED POINT PROBLEMS USING BREGMAN DISTANCE APPROACH

  • Hammed A. Abass;Ojen K. Narain;Olayinka M. Onifade
    • Nonlinear Functional Analysis and Applications
    • /
    • 제28권2호
    • /
    • pp.497-520
    • /
    • 2023
  • Numerous problems in science and engineering defined by nonlinear functional equations can be solved by reducing them to an equivalent fixed point problem. Fixed point theory provides essential tools for solving problems arising in various branches of mathematical analysis, such as split feasibility problems, variational inequality problems, nonlinear optimization problems, equilibrium problems, complementarity problems, selection and matching problems, and problems of proving the existence of solution of integral and differential equations.The theory of fixed is known to find its applications in many fields of science and technology. For instance, the whole world has been profoundly impacted by the novel Coronavirus since 2019 and it is imperative to depict the spread of the coronavirus. Panda et al. [24] applied fractional derivatives to improve the 2019-nCoV/SARS-CoV-2 models, and by means of fixed point theory, existence and uniqueness of solutions of the models were proved. For more information on applications of fixed point theory to real life problems, authors should (see [6, 13, 24] and the references contained in).

Degradation Kinetics of Carbohydrate Fractions of Ruminant Feeds Using Automated Gas Production Technique

  • Seo, S.;Lee, Sang C.;Lee, S.Y.;Seo, J.G.;Ha, Jong K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권3호
    • /
    • pp.356-364
    • /
    • 2009
  • The current ruminant feeding models require parameterization of the digestion kinetics of carbohydrate fractions in feed ingredients to estimate the supply of nutrients from a ration. Using an automated gas production technique, statistically welldefined digestion rate of carbohydrate, including soluble carbohydrate, can be estimated in a relatively easy way. In this study, the gas production during in vitro fermentation was measured and recorded by an automated gas production system to investigate degradation kinetics of carbohydrate fractions of a wide range of ruminant feeds: corn silage, rice straw, corn, soybean hull, soybean meal, and cell mass from lysine production (CMLP). The gas production from un-fractionated, ethanol insoluble residue and neutral detergent insoluble residue of the feed samples were obtained. The gas profiles of carbohydrate fractions on the basis of the carbohydrate scheme of the Cornell Net Carbohydrate and Protein System (A, B1, B2, B3 and C) were generated using a subtraction approach. After the gas profiles were plotted with time, a curve was fitted with a single-pool exponential equation with a discrete lag to obtain kinetic parameters that can be used as inputs for modern nutritional models. The fractional degradation rate constants (Kd) of corn silage were 11.6, 25.7, 14.8 and 0.8%/h for un-fractioned, A, B1 and B2 fractions, respectively. The values were statistically well estimated, assessed by high t-value (>12.9). The Kd of carbohydrate fractions in rice straw were 4.8, 21.1, 5.7 and 0.5%/h for un-fractioned, A, B1 and B2 fractions, respectively. Although the Kd of B2 fraction was poorly defined with a t-value of 4.4, the Kd of the other fractions showed tvalues higher than 21.9. The un-fractioned corn showed the highest Kd (18.2%/h) among the feeds tested, and the Kd of A plus B1 fraction was 18.7%/h. Soybean hull had a Kd of 6.0, 29.0, 3.8 and 13.8%/h for un-fractioned, A, B1 and B2, respectively. The large Kd of fraction B2 indicated that NDF in soybean hull was easily degradable. The t-values were higher than 20 except for the B1 fraction (5.7). The estimated Kd of soybean meal was 9.6, 24.3, 5.0%/h for un-fractioned, A and B1 fractions, respectively. A small amount of gas (5.6 ml at 48 ho of incubation) was produced from fermentation of CMLP which contained little carbohydrate. In summary, the automated gas production system was satisfactory for the estimation of well defined (t-value >12) kinetic parameters and Kd of soluble carbohydrate fractions of various feedstuffs that supply mainly carbohydrate. The subtraction approach, however, should be applied with caution for some concentrates, especially those which contain a high level of crude protein since nitrogen-containing compounds can interfere with gas production.

폐광산 지역 옥동천 퇴적물내에 포함된 중금속의 존재형태 및 이동성 (Fraction and Mobility of Heavy Metals in the Abandoned Closed Mine Near Okdong Stream Sediments)

  • 김휘중;양재의;이재영;전상호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권2호
    • /
    • pp.44-51
    • /
    • 2005
  • 옥동천 퇴적물을 대상으로 중금속의 존재형태 및 이동성에 관하여 조사하였다. 퇴적물내의 중금속의 존재형태는 adsorbed fraction, carbonate fraction, reducible fraction, organic fraction, and residual fraction 다섯 가지 형태로 분류하였으며, 존재형태 중 제일 많은 부분을 차지하는 부분은 reducible fraction이며 다음으로 organic fraction라 residual fraction으로 나타났다. Adsorbed fraction은 중금속의 존재형태 미미한 부분으로 나타났다. 옥동천 퇴적물내 의 총 카드뮴 중 수체로 이동 가능한 부분은 $19.8{\sim}56.7%$이며, 구리, 납의 경우 대부분이 organic fraction으로 나타났다. 구리와 납의 경우 이동 가능한 형태는 납의 경우 총 납의 농도 중 $2.6{\sim}48.1%$, 구리는 $0.2{\sim}36.9%$로 나타났으며, 아연은 $0.5{\sim}48.5%$로 나타났다. 카드뮴, 아연, 구리의 경우 이동 가능한 부분 중 대부분이 reducible fraction이며, 납과 니켈의 경우 adsorbed fraction으로 나타났다. 구리와 아연의 이동이 기능한 경우는 수중의 산소의 유무에 의해 결정되며, 납이나 니켈의 경우 수중에서의 물리적 영향, 수소이온의 농도가 증가, 산소의 고갈 등에 의해 수층으로 이동할 가능성이 높다.

경기육괴 북서부에 분포하는 백악기 명성산 화강암의 성인에 대한 지화학적 연구 (Geochemical Studies on Petrogenesis of the Cretaceous Myeongseongsan Granite in the Northwestern Gyeonggi Massif)

  • 이은지;박하은;박영록
    • 암석학회지
    • /
    • 제26권4호
    • /
    • pp.327-339
    • /
    • 2017
  • 경기육괴 북서부에 분포하는 백악기 명성산화강암은 암체의 대부분을 차지하는 담홍색의 흑운모 몬조 화강암과 상대적으로 소량 산출되는 백색의 흑운모 알칼리화강암으로 이루어져 있다. 낮은 Sr 함량과 높은 Ba 함량, REE 다이아그램에서 보여지는 부(-)의 Eu 이상치, 스파이더 다이아그램에서 나타나는 부(-)의 Sr 이상치, Sr과 Rb 사이에 나타나는 부의 관계, Sr과 Ba 그리고 Sr과 $Eu/Eu^*$ 사이에 나타나는 정(+)의 관계는 사장석과 K-장석의 정출이 마그마 분화과정에 있어 중요한 역할을 하였음을 지시한다. 명성산화강암은 I, S, A형 화강암을 분류하는 분류도에서 I & S 형 화강암 영역에 도시되는데, 흑운모 몬조화강암은 분화되지 않은 I & S 형 화강암 영역에, 흑운모 알칼리화강암은 분화된 I & S 형 화강암 영역에 도시됨으로 흑운모 알칼리화강암이 흑운모 몬조화강암보다 더 분화되어 생성된 화강암임을 알 수 있다. A/CNK vs A/NK 다이아그램에서 고알루미나 영역에 도시되는 명성산화강암의 근원암의 성질을 알아보기 위하여 Rb/Sr vs Rb/Ba 도와 $Al_2O_3/TiO_2$ vs $CaO/Na_2O$ 도에 도시한 결과 명성산화강암은 점토가 결핍된 근원암인 사질암과 잡사암 사이의 조성을 갖는 변성퇴적암류로부터 유래하였거나 이에 상응하는 화성암으로부터 유래하였으며, 전암 저어콘 포화 온도를 계산해 본 결과 $740-799^{\circ}C$ 온도 조건에서 용융되어 생성되었음을 알 수 있다.

확산 텐서 영상에서 확산 경사자장의 방향수에 따른 잡음 분석 (The Noise Performance of Diffusion Tensor Image with Different Gradient Schemes)

  • 이영주;장용민;김용선
    • 대한의용생체공학회:의공학회지
    • /
    • 제25권6호
    • /
    • pp.439-445
    • /
    • 2004
  • 확산 텐서 영상은 조직 내 물 분자의 확산 현상을 이용하는 영상기법으로 조직 구조의 비등방성 및 방향성에 대한 정보를 제공해준다. 근육이나 뇌백질과 같은 조직에서는 신경다발들이 일정한 방향성을 가지고 있어서 그 방향에 대해서 확산이 잘 일어난다. 이러한 확산을 비등방성이라 한다. 확산의 비등방성의 정도는 RA, VR 그리고 FA와 같은 지표를 이용하여 나타낸다. 본 연구에서는 다른 확산 경사자장의 수에 대하여 각각 FA 영상을 만들었다. FA영상에 관심영역을 설정하고 FA 평균값 및 FA의 표준편차를 계산하였다. 그 결과, 경사자장의 방향수가 증가함에 따라서 FA값 및 FA의 표준편차가 감소하였다. 또한 ADC 측정 오차에 대한 표준 오차도 확산 경사자장의 방향수가 증가함에 따라서 감소하였다. 결론적으로 경사자장의 방향수에 따라서 잡음의 영향이 다르며, 더 많은 방향수를 사용하는 것이 FA영상의 질을 향상시킨다는 것을 알 수 있었다. 그러나 영상획득 시간과 FA의 표준편차 등을 고려했을 때. 임상적으로 사용될 확산 텐서영상의 방향수는 23개 정도가 적당하다고 결론 내릴 수 있다.

Software Development for the Visualization of the Orientation of Brain Fiber Tracts in Diffusion Tensor Imaging Using a 24 bit Color Coding

  • Jung-Su Oh;In Chan Song;Ik-Hwan Cho;Jong-Hyo Kim;Kee Hyun Chang;Kwang-Suk Park
    • 대한의용생체공학회:의공학회지
    • /
    • 제25권1호
    • /
    • pp.43-47
    • /
    • 2004
  • 뇌의 기능성과 분산 영역간의 연결성에 대한 관심이 매우 증대되고 있는 추세다. 그 중에서 DTI (확산 텐서 영상)는 비침습적으로 뇌에서의 물분자의 확산과 뇌의 회백질 신경 다발 구조에 대한 정보를 제공할 수 있는 자기공명영상 기법이다. 따라서 우리는 이 기법을 통해 다른 해부학적 혹은 기능적 자기공명영상 기법으로는 얼을 수 없는 뇌의 신경 섬유 다발과 대뇌 피질 영역의 연결성 정보를 얻을 수 있다. 본 연구에서는 컬러 코딩 방식에 의하여 뇌의 주된 신경 다발의 방향성을 가시화 하고자 한다. 인간 뇌의 방향성 지도는 연합섬유, 방사섬유. 교련섬유. 운동 및 감각회로 섬유의 다발들을 구별하기 쉽게 하여준다. 우리는 이 목적 하에 24비트 칼라코딩 방법을 윈도우 PC 환경에서 IDL을 이용하여 구현하였다. 덧붙여 방향성의 각각의 성분 및 이방성에 대한 컬러 코딩과 이들을 표현하기 위한 다양한 색상표를 구현하였다. 결론적으로 우리의 24 비트 킬러 코딩을 이용한 뇌 회백질의 신경 다발의 방향성 가시화에 성공하였다. 우리가 구현한 방법에 의해 뇌의 주요 신경 다발들이 잘 가시화됨을 확인하였다.