• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.90-99
• /
• 2000

This report describes the results of analysis, synthesis and evaluation of antimony dithiocarbamates (SbDTC). Sb-DTC were synthesized by reacting antimony oxide with dithiocarbamates whish were prepared by reaction of dialkylamines and carbon disulfide. The chemical structures and properties of synthesized Sb-DTCs in lab. were discussed. The frictional properties of SbDTC were tested with Four-Ball Wear Scar Tester and Four-Ball Extreme Tester by ASTM method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1424-1425
• /
• 2006

A four-step rapid thermal annealing (RTA) process is proposed in order to improve the throughput and stabilize the process, compared to the six-step RTA process. Effects of annealing on the properties of a structure mode of CMOS process in both cases were investigated. The implanted dopant(As, $BF_2$ and Ti/TiN) movement in silicon during different rapid thermal annealing conditions was studied using secondary ion mass spectroscopy (SIMS) technique. These results show that the four-step RTA process significantly improves time effect and throughput (15%) by the condition of ramping up compared to the six-step RTA process.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.391-398
• /
• 2000

The index properties of cohesive soils play an important role to examine entire tendency of soil properties. Especially, the Atterberg limits have a good correlation with compression and shear strength of cohesive soils. However, these values strongly depend on their testing methods. In this study, for Pusan clays the Atterberg limits were peformed under different conditions; for example, four kinds of specimen preparation, two kinds of testing equipment, and four kinds of estimating method. And a laboratory vane test was peformed to compare the undrained shear strength with that of the fall cone test. As experimental results, the value of liquid limit performed for oven-dried sample, followed in ASTM D4318, underestimated by about 10% compared to those of another three methods, irrespective to the used equipments. But the value of plastic limit was not influenced by sample preparation methods and equipments. The liquid limits by one-point methods(Leroueil et al., 1996; Nagaraj et al., 1981) were agreed well with those of different methods. Finally, the undrained shear strength by laboratory vane test was relatively larger than that of fall cone test, and the relationship between both showed a bad trend.

• 한국식품영양과학회지
• /
• 제24권4호
• /
• pp.601-605
• /
• 1995

To efficiently utilize not only fresh chestnut(FC) but also wormy chestnut(WC), four types of chestnut starches which were fresh chestnut starch(FCS), fresh chestnut crude starch(FCCS), wormy crude starch(WCS) and wormy chestnut crude starch(WCCS) were extracted from them, respectively. The mooks were prepared with four types chustnut starches and a acorn crude starch(ACS) as control. Sensory evaluation by five points method indicated that the mooks had noticeable differences in smoothness, taste and fragrance, and no noticeable differences in color and texture. The total scores of mooks for sensory evaluation were higher in order of FCS, FCCS, WCS, ACS. Retrogradation properties for the chestnut mooks prepared by five type starches which were FCS, FCCS, WCS, WCCS and FWCCS(mixing FCCS and WCCS with same weighs) were also investigated with the variation in the starch concentration, storage time and storage temperature by hardness of textural properties. The results indicated that when the mooks which were prepared with starches(all but FWCCS), concentration 8% and 10% were storaged for 7 days at 15$^{\circ}C$, there were no variations in the qualities (hardness) of the chestnut mooks.

• Genomics & Informatics
• /
• 제16권3호
• /
• pp.44-51
• /
• 2018

Fluoroquinolone (FQ) antibiotics are an important class of synthetic antibacterial agents. These are the most extensively used drugs for treating bacterial infections in the field of both human and veterinary medicine. Herein, the antibacterial and pharmacological properties of four fluoroquinolones: lomefloxacin, norfloxacin, ciprofloxacin, and ofloxacin have been studied. The objective of this study was to analyze the antibacterial characteristics of the different fluoroquinolones. Also, the pharmacological properties of the compounds including the Lipinski rule of five, absorption, distribution, metabolism, and excretion, LD50, drug likeliness, and toxicity were evaluated. We found that among all four FQ molecules, ofloxacin showed the highest antibacterial activity through in silico assays with a strong interaction (-38.52 kJ/mol) with the antibacterial target protein (topoisomerase-II DNA gyrase enzyme). The pharmacological and pharmacokinetic analysis also showed that the compounds ciprofloxacin, ofloxacin, lomefloxacin and norfloxacin have good pharmacological properties. Notably, ofloxacin was found to possess an IGC50 (concentration needed to inhibit 50% growth) value of $0.286{\mu}g/L$ against the Tetrahymena pyriformis protozoa. It also tested negative for the Ames toxicity test, showing its non-carcinogenic character.

• 한국연초학회:학술대회논문집
• /
• 한국연초학회 2000년도 24회 정기총회 및 43회 학술발표회
• /
• pp.12-21
• /
• 2000

The smoke from a burning cigarette is classified as mainstream, which is the smoke inhaled by the smoker during a puff, and sidestream, which is defined by ISO 10185 as all smoke which leaves a cigarette during the smoking process other than from the butt end. Most of the sidestream smoke is generated during static burn, that is, in between puffs. The amount of sidestream smoke generated by a cigarette depends on the cigarette construction, tobacco blend, and properties of the cigarette paper, The main paper properties affecting sidestream smoke generation are: porosity, basis weight, type and amount of filler, type and amount of burn additive.Sidestream smoke is composed of a visible phase (small liquid droplets) and an invisible phase (gaseous molecules). This paper focuses on the visible portion of the sidestream smoke. Optical methods, which are based on the relationship between light scattering and density of the rising plume of smoke, have been used successfully by the industry. However, the present trend is to use gravimetric methods where the particulate matter is captured on a Cambridge(R) filter pad and weighed. The gaseous portion of the sidestream smoke, which does not contribute to the visible sidestream smoke, passes through the Cambridge filter pad.Sidestream smoke reduction is achieved by modifying certain mass transport processes occurring in a smoldering cigarette. There are four main pathways for reducing sidestream smoke: A) less tobacco burned, B) slower rate of tobacco combustion, C) more efficient trapping of smoke by the cigarette paper, and D) more complete combustion of tobacco. This paper discusses how the physical properties of paper and cigarette construction affect sidestream smoke reduction via the above four mechanisms.

• 충청수학회지
• /
• 제19권4호
• /
• pp.365-373
• /
• 2006

In this paper four regular relations, R, $L^*$, $M^*$ and $Q^*$ in a transformation group (X, T) are defined and some of their properties are studied.

• Korean Journal of Mathematics
• /
• 제20권2호
• /
• pp.177-184
• /
• 2012

In this paper, we study the four different types of relations, $\mathcal{P}(X,T)$, $\mathcal{R}(X,T)$, $\mathcal{L}(X,T)$, and $\mathcal{S}(X,T)$ in a transformation (X,T), and obtain some of their properties. In particular, we give a relationship between $\mathcal{R}(X,T)$ and $\mathcal{S}(X,T)$.

• Structural Engineering and Mechanics
• /
• 제3권4호
• /
• pp.383-390
• /
• 1995

A 2-D four-noded finite element which contains a ${\lambda}$ singularity is developed. The new element is compatible with quadratic standard isoparametric elements. The element is tested on two different examples. In the first example, an edge crack problem is analyzed using two different meshes and different integration orders. The second example is a crack perpendicular to the interface problem which is solved for different material properties and in turn different singularity order ${\lambda}$. The results of those examples illustrate the efficiency of the proposed element.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.100-103
• /
• 2003

The basic structure of porphyrin consists of four pyrrole units linked by four methine bridges. It reveals that the cyclic 16-atom is the preferred cyclic system for n-electron delocalization since this pathway exhibits the highest degree of bond equalization. Scheme 1 (a) shows the 16-center system is the chromogen of the porphyrins, which allows 18-electron delocalization that could produce aromatic characteristics (1,2). (omitted)