• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1467-1472
• /
• 2003

Fouling of heat exchangers is generated by water-borne deposits, commonly known as foulants including particulate matter from the air, migrated corrosion produces; silt, clays, and sand suspended in water; organic contaminants; and boron based deposits in plants. This fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. This paper focuses on fouling analyses for six heat exchangers of two primary systems in two nuclear power plants; the regenerative heat exchangers of the chemical and volume control system and the component cooling water heat exchangers of the component cooling water system. To analyze the fouling for heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. Based on the results of the fouling analyses, the present thermal performances and fouling levels for the six heat exchangers were predicted.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.55-60
• /
• 2003

As operating time of heat exchangers progresses, fouling generated by water-borne deposits increases and thermal performance decreases. The fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. The heat exchangers of nuclear power plants have been analyzed in terms of the heat flux and heat transfer coefficient at test conditions based on the ASME OM-S/G-Part 2 as a means of heat exchanger management. It is hard to estimate the heat performance trend and to establish the future management plan. This paper describes the fouling evaluation method which can evaluate the thermal performance for heat exchangers and estimate the future fouling variations and the plugging margin evaluation method which can reflect the current fouling level developed in this study. To develop the fouling and plugging margin evaluation methods for heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. For the purpose of verifying the two evaluation methods, the fouling and plugging margin evaluations were performed for a component cooling heat exchanger in a nuclear power plant.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권2호
• /
• pp.88-96
• /
• 2002

The present study was conducted to estimate the effect on fouling reduction in tubes of the condenser. It shows in detail how to calculate the fouling factor from the experimental results of refrigeration systems with or without the automatic cleaning system using sponge balls and to predict the variation of the factor with time. It also represents how to calculate the temperature and pressure decrease of the refrigerant vapor in the condenser and the load decrease of the compressor in the refrigeration system by fouling reduction.

• 설비공학논문집
• /
• 제13권6호
• /
• pp.482-489
• /
• 2001

The present study was conducted to estimate the effect on fouling reduction in tubes of the condenser. It shows in detail how to calculate the fouling factor from the experimental results of refrigeration systems with or without the automatic cleaning system using sponge balls and to predict the variation of the factor with time. It also represents how to calculate the temperature and pressure decrease of the refrigerant vapor in the condenser and the load decrease of the compressor in the refrigeration system by fouling reduction.

• 대한기계학회논문집B
• /
• 제28권2호
• /
• pp.167-173
• /
• 2004

Fouling of heat exchangers is generated by water-borne deposits, commonly known as foulants including particulate matter from the air, migrated corrosion produces; silt, clays, and sand suspended in water; organic contaminants; and boron based deposits in plants. The fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. This paper describes the fouling analysis technique developed in this study which can analyze the thermal performance for heat exchangers and estimate the future fouling variations. To develop the fouling analysis technique fur heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. For the purpose or verifying the fouling analysis technique, the routing analyses were performed for four heat exchangers in several nuclear power plants; two residual heat removal heat exchangers of the residual heat removal system and two component cooling water heat exchangers of the component cooling water system.

• 한국재료학회지
• /
• 제7권9호
• /
• pp.750-757
• /
• 1997

발전소 복수기의 열전달 표면에 형성되는 불순물의 fouling factor와 튜브내면에 부착되는 피막의 두께변화를 측정하여 복수기 관리에 관한 지침을 제시하고자 모델복수기를 이용하여 60일간 현장실험을 실시하였다. 복수기의 fouling factor는 시험 후 약 40일 이후부터 큰 폭으로 증가하였다. 발전용 복수기의 관청결도가 85-90%로 설계되므로 설계치를 유지하기 위해서는 약 40일 마다 복수기튜브를 세정하여 관청결도를 향상시켜야 할 것으로 판단되었다. 또한 동합금 재질을 사용하는 복수기튜브는 설치 후 보호피막이 형성되는 초기 30일 동안의 방식운전이 복수기튜브 건전성 확보에 중요한 인자임을 유추할 수 있었다.

• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.63-75
• /
• 2001

Species composition and community structure of the fouling found on the hulls of 28 ships traveling through 6 main shipping routes (SR)in the Far East Sea Basin were analyzed using statistical methods. Samples obtained during 1976-1990 expeditions of the Institute of Marine Biology were used for the analyses. These samples were taken from the ships anchored in the harbor by SCUBA diving and in dry-docks of the Vladivostok ship-repairing yard. Similar composition of the fouling communities occurred on the ships travelling the same SR. In five cases, fouling was dominated by different Cirripedia communities. And, in one case, a community of the mussel Mytilus trossulus was found. In most cases the results of the factor analyses showed extremely low level of the relationships among different animals and algal species in fouling communities. Each ocean-going ship had an original structure of the fouling. Spatially disconnected animal associations of tropical and boreal origin may simultaneously coexist at the same ship. This paper testified to the originality of the zone of anthropogenic substrata as a benthos concentrator in the pelagic regions of the world ocean. The fouling from different zones showed that each zone possesses peculiar features and regularities of the composition and relationships between organisms dwelling here.

• 멤브레인
• /
• 제25권3호
• /
• pp.268-275
• /
• 2015

침지식 분리막 모듈에서 공기강도에 따른 분리막 위치에 대한 오염을 조사하였다. 분리막의 충진밀도가 낮은 곳에서 높은 유체 유속을 나타내었으며, 유체 속도는 기-액 주입률에 비례하였다. 전단응력은 기-액 주입률 및 유체 유속에 비례하였다. 비가역오염($R_{ir}$)은 흡입 압력이 가까운 부분에서 가장 높게 나타났다(position 1). 비가역오염에 대한 저항과 분리막 고유 저항의 비($R_{ir}/R_m$) 및 비가역오염에 대한 저항과 가역오염의 저항의 비($R_{ir}/R_r$)도 position 1에서 가장 높게 조사되었다. 비가역오염($R_{ir}$)은 흡입 압력이 높은 곳인 position 1에 오염물질이 축적되어진 결과이다. 분리막 위치에 따른 오염현상은 모듈 디자인 최적화에 중요한 인자임을 알았다.

• 상하수도학회지
• /
• 제35권6호
• /
• pp.379-387
• /
• 2021

In general, trans-membrane pressure (TMP), flux, filtration resistance are used as indicators to evaluate the degree of fouling in MBR. However, they have limitations in determining the level of EPS generation, which is known as an important factor of fouling. Therefore, a new evaluation method is required to monitor the amount of EPS generation. In this study, the applicability of capillary suction time (CST), which is used to measure the dewaterability of sludge, was evaluated as an indirect fouling evaluation index. Statistical analysis was performed to evaluate the effect of EPS on CST, and to determine whether EPS has high similarity with representative fouling evaluation indicators and CST, and quantitatively compared them. As a result, the correlation coefficient between CST and bEPS was 0.7988, which was higher than the correlation coefficient between filtration resistance and bEPS. Since bEPS is a major factor inducing fouling by affecting the formation of the cake layer, it was evaluated that CST, which has a high correlation with bEPS, is suitable to represent EPS. In addition, it was evaluated that the correlation coefficient between filtration resistance and CST was high as 0.7187, which could be used as a fouling evaluation index.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3695-3705
• /
• 1996

We designed the hot wind tunnel to reproduce the conditions of utility boiler and carried out its performance test, in order to investigate the particulate two-phase flow behaviour, the fouling and heat transfer characteristics to the heat exchanger. The hot wind tunnel introduces the control system to control the temperature in the test section. The particle is injected into the hot gas stream. The fouling probe (cylindrical tube) is positioned normal to the particulate gas-particle two-phase flow and cooled by the air. The temperature of gas and cooling air, and temperature in the fouling probe are measured as a function of time, giving the local and averaged heat transfer and fouling factor. The shape of particulate deposition adhered to the fouling probe is also observed.