• Journal of Internet Computing and Services
• /
• v.2 no.2
• /
• pp.23-36
• /
• 2001

To support real-time multicast, the existing DS network may use the EF PHB for transmission, However, because of the dynamic characteristics of the multicast flow and the features of the EF PHB. it is very difficult to make a provision of resources or to manage the network when EF multicast flows increase, Also, the existing LBE PHB can not guarantee the transmission delay bounds required for the real-time multicast traffic, In this paper. a new concept of PHB. namely, low-delay multicast PHB, that may guarantee approximately the per-hop delay is proposed, For the low-delay multicast PHB, router architectures are devised, The queue management algorithm on a low-delay multicast queue and a scheduling method are also devised. This new architecture of the LDM AF class is simple to be implemented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2871-2877
• /
• 2014

Real-time communication and diversification of multimedia application services using high-capacity data over the Internet demand high speed connection, and real-time and high-speed access internet service such as multimedia make Internet traffic increase rapidly. Meanwhile, QoS (Quality of Service) of internet service is not satisfied. In this situation, ISP (Internet Service Provider) has been required to improve service quality and extend network according to the user's needs. This request includes issue of extending network focused on increasing router and the number of routing table as well as simply extending bandwidth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.703-712
• /
• 2015

This paper proposes the UIGRP, which can tackle the problem of the network disconnection and packet transmission delay caused by turning vehicles frequently in an urban intersection. The UIGRP was designed as follows. First, it calculates the direction of vehicles using the moving direction of vehicles and the location of a destination. Second, it makes the RSU measure the density of an urban intersection. Third, the TGF Algorithm in the UIGRP decides the data transmission paths by setting as an intermediate node, not only the vehicle that is moving in the direction where a destination node is located, but also the node that has the highest density. The TGF algorithm using a moving direction and density minimizes or removes the occurrence of local maximum problems that the existing Greedy Forwarding algorithm has. Therefore, the simulation result shows that UIGRP decreases the occurrence of local maximum problems by 3 and 1 times, and the packet transmission time by 6.12 and 2.04(ms), and increases the success rate of packet transmission by 15 and 3%, compared to the existing GPSR and GPUR.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.129-142
• /
• 2004

As the Internet gets faster, the demand for high-speed routers that are capable of forwarding more than giga bits of data per second keeps increasing. In the previous research, Bitmap Trie algorithm was developed to rapidly execute LPM(longest prefix matching) process which is Well known as the Severe performance bottleneck. In this paper, we introduce a novel algorithm that drastically enhanced the performance of Bitmap. Trie algorithm by applying three techniques. First, a new table called the Count Table was devised. Owing to this table, we successfully eliminated shift operations that was the main cause of performance degradation in Bitmap Trie algorithm. Second, memory utilization was improved by removing redundant forwarding information from the Transfer Table. Lastly. the range of prefix lookup was diversified to optimize data accesses. On the other hand, the processing delays were classified into three categories according to their causes. They were, then, measured through the execution-driven simulation that provides the higher quality of the results than any other simulation techniques. We tried to assure the reliability of the experimental results by comparing with those that collected from the real system. Finally the Enhanced Bitmap Trie algorithm reduced 82% of time spent in previous algorithm.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.43-54
• /
• 2007

The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3587-3594
• /
• 2022

A distributed high-speed data acquisition and monitoring system for the RF negative ion source at Huazhong University of Science and Technology (HUST) is developed, which consists of data acquisition, data forwarding and data processing. Firstly, the data acquisition modules sample physical signals at high speed and upload the sampling data with corresponding absolute-time labels over UDP, which builds the time correlation among different signals. And a special data packet format is proposed for the data upload, which is convenient for packing or parsing a fixed-length packet, especially when the span of the time labels in a packet crosses an absolute second. The data forwarding modules then receive the UDP messages and distribute their data packets to the real-time display module and the data storage modules by PUB/SUB-pattern message queue of ZeroMQ. As for the data storage, a scheme combining the file server and MySQL database is adopted to increase the storage rate and facilitate the data query. The test results show that the loss rate of the data packets is within the range of 0-5% and the storage rate is higher than 20 Mbps, both acceptable for the HUST RF negative ion source.

• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2012

As the new requirements for wireless sensor networks are emerging, real-time communications is becoming a major research challenge because resource-constrained sensor nodes are not powerful enough to accommodate the complexity of the protocol. In addition, an efficient energy management scheme has naturally been a concern in wireless sensor networks for a long time. However, the existing schemes are limited to meeting one of these two requirements. To address the two factors together, we propose real-time communications with two approaches, a protocol for satisfied conditions and one for unsatisfied. Under the satisfied requirement, existing real-time protocol is employed. On the other hand, for the unsatisfied requirement, the newly developed scheme replaces the existing scheme by adjusting the transmission range of some surplus nodes. By expanding the transmission range, the end-to-end delay is shortened because the number of intermediate nodes decreases. These nodes conserve their energy for real-time communications by avoiding other activities such as sensing, forwarding, and computing. Finally, simulation results are given to demonstrate the feasibility of the proposed scheme in high traffic environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.281-290
• /
• 2002

In this paper, we propose an efficient packet forwarding method for an IP-based wireless Internet access network. Packets are forwarded along with a flow, that is a kind of connection-oriented connection and established before delivering packets. For this purpose, we also propose a flow resolution method and a modified IPv6 header for delivering packet in the wireless Internet access network. In addition, the method to support the mobility of mobile stations is explained, and the implementation issues are discussed. In order to estimate the performance of the proposed method, we analyzed the delay time to deliver packets in the wireless Internet access network. The numerical results show that the proposed method is very efficient, in the view point of delay.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.35-40
• /
• 2013

The messages on mobile terminal may contain context information such as user's location, time and preference. This paper proposes message forwarding system based on user's context. The server stores the predefined target addresses which may be mobile phone number, web server address and email address. On request for message transmission, the server tries to find a target address matching a user's context. Thus, a sender transmits messages to a representative address without knowing various receiver's addresses and a receiver can retrieve classified messages according to subject/location.

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.618-629
• /
• 2017

Mobile nodes can't always connect each other in DTNs (delay tolerant networks). Many DTN routing protocols that favor the "multi-hop forwarding" are proposed to solve these network problems. But they also lead to intolerant delivery cost so that designing a overhead-efficient routing protocol which is able to perform well in delivery ratio with lower delivery cost at the same time is valuable. Therefore, we utilize the small-world property and propose a new delivery metric called multi-probability to design our relay node selection principles that nodes with lower delivery predictability can also be selected to be the relay nodes if one of their history nodes has higher delivery predictability. So, we can find more potential relay nodes to reduce the forwarding overhead of successfully delivered messages through our proposed algorithm called HESnW. We also apply our new messages copies allocation scheme to optimize the routing performance. Comparing to existing routing algorithms, simulation results show that HESnW can reduce the delivery cost while it can also obtain a rather high delivery ratio.