• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.5
• /
• pp.1129-1140
• /
• 2017

Unidirectional data transmission system, which allows physical one way transmission, removes the backward link physically to prevent the intrusion from the outside through the network. However, the system is difficult to apply to the environment requiring either backward transmissions or bi-directional communications. In this paper, we proposed Limited Two-way communications system, called as LimTway, which only allows outbound TCP two-way communications. LimTway uses two one-way links(forward, backward). While the forward one-way link is staying to be activated so that an allowed outbound UDP traffic could be transmitted one-way always, the backward one-way link is activated while allowed outbound TCP sessions are established. In order to prevent the intrusion from the outside during the period, the software of LimTway is designed to allow only the transmissions of both outbound TCP two-way communication traffics and outbound UDP traffics.

• Journal of Korea Technology Innovation Society
• /
• v.1 no.1
• /
• pp.69-82
• /
• 1998

As a new medium for knowledge diffusion, E-Journal is expected to be a general type of scholarly communication. However, the techno - economic problems have hindered the advancement of the E-Journal. For the technical aspects, there are problems such as the standardization of document format, automatization of the document preparation, forward and backward link between documents. Also there are necessities for the support of the information infrastructure of digital library and information superhighway. For the economic domain, reengineering of total publishing cycle is considered and the new paradigm of peer review is analyzed. We pointed out that the main difficulties in the diffusion of E-Journal are on the promotion of service and technological advance, not the price and marketing strategy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.639-644
• /
• 2009

This paper presents a modified CFS (Closed-Form Solution) for FLAOA (Forward Link AOA) measurements. During when the pseudo-measurement equation for FLAOA is derived, the angle measurement noise is treated more carefully in approximation. As the covariance matrix of the pseudo-measurement noise is influenced by unknown user positions and azimuth, a two-step estimation technique is used in the proposed CFS. The performance of the proposed CFS for FLAOA is compared to that of the conventional CFS for FLAOA and RLAOA (Reverse Link AOA) in a computer simulation. Simulation results show that the proposed method is potentially suitable for applications involving the localization and guidance of indoor mobile robots.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.82-85
• /
• 2012

In this paper, we present the forward link ACM method to improve the link availability and system throughput. Also, we compare the prediction algorithm between slope based prediction and LMS algorithm. The simulation results show that the 99% of predicted values in LMS algorithm is within 3dB and that of predicted values in the slope based prediction method is within 4.5dB.

• ETRI Journal
• /
• v.9 no.1
• /
• pp.84-96
• /
• 1987

The equality relation is very important in mechanical theorem proving procedures. A proposed inference rule called RHU-resolution is intended to extend the hyperparamodulation[23, 9] by introducing a bidirectional proof search that simultaneously employs a forward reasoning and a backward reasoning, and generalize it by incorporating beneflts of extended hyper steps with a preprocessing process, that includes a subsumption check in an equality graph and a high level planning. The forward reasoning in RHU-resolution may replace the role of the function substitution link.[9] That is, RHU-deduction without the function substitution link gets a proof. In order to control explosive generation of positive equalities by the forward reasoning, we haue put some restrictions on input clauses and k-pd links, and also have included a control strategy for a positive-positive linkage, like the set-of-support concept, A linking path between two end terms can be found by simple checking of linked unifiability using the concept of a linked unification. We tried to prevent redundant resolvents from generating by preprocessing using a subsumption check in the subsumption based eauality graph(SPD-Graph)so that the search space for possible RHU-resolution may be reduced.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3449-3467
• /
• 2015

A broadcast operation is the fundamental transmission technique in mobile ad-hoc networks (MANETs). Because a broadcast operation can cause a broadcast storm, only selected forwarding nodes have the right to rebroadcast a broadcast message among the one-hop and two-hop neighboring nodes of a sender. This paper proposes the maximum intersection self-pruning (MISP) algorithm to minimize broadcasting redundancy. Herein, an example is given to help describe the main concept of MISP and upper bounds of forward node have been derived based on induction. A simulation conducted demonstrated that when conventional blind flooding (BF), self-pruning (SP), an optimized link state routing (OLSR) multipoint relay (MPR) set, and dominant pruning (DP), are replaced with the MISP in executing Strong duplicate address detection (DAD), the performances in terms of the energy consumption, upper bounds of the number of forward nodes, and message complexity have been improved. In addition, to evaluate the performance in reference to the link error probability, P_e, an enhancement was achieved by computing a proposed retransmission limit, S, for error recovery based on this probability. Retransmission limit control is critical for efficient energy consumption of MANET nodes operating with limited portable energy where Strong DAD reacts differently to link errors based on the operational procedures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1260-1266
• /
• 2007

Error propagation of source-relay (S-R) link limits the performance of decode-and-forward (DF) relay and prohibits DF relay from achieving full diversity gain. In order to solve this problem, the proposed deployment strategy focuses on two objectives. One is to achieve full diversity gain, and the other is to minimize the used power of the DF relay system. In order to achieve full diversity, the error probability of S-R link should be lower than that of maximal ratio combining (MRC) at destination without error propagation since the error probability of the weaker link dominates the total error probability. The proposed strategy of relay positioning points out the range of the relay position for achieving full diversity, and the used power of the relay is minimized by this range. Analysis of error probability and simulation results prove that the two objectives are achieved by the proposed strategy of the relay position.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1983.10a
• /
• pp.108-111
• /
• 1983

This paper presents a new method for the optimum capacity assignment in store-and-forward communication networks under a total fixed-capacity constraints. Any two link capacities needed in this method can have the desirable quantites and then other capacities can be obtained from the fixed two link capacities. When the minimum and the maximum capacities that are the quantites of the conventional method are fixed, the total average time delay from the new method is almost the same as that from the conventional method. And when the minimum capacity is fixed, the new method gives smaller average time delay.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2009

In this paper, we discuss hardware design and deployment issues in current passive UHF RFID systems. Using the link budget concept, the methodology to calculate forward- and reverse-link interrogation range is shown. Then, we consider hardware issues: phase diversity, phase noise with range correlation, and TX leakage problems. Finally, three interference problems when deploying RFID systems are presented.