• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.772-778
• /
• 2005

This paper is concerned with the analysis of material flow characteristics of combined tube extrusion using pipe. The analysis in this paper concentrated on the evaluation of the design parameters for deformation patterns of tube forming, load characteristics, extruded length, and die pressure. The design factors such as punch nose radius, die corner radius, friction factor, and punch face angle are involved in the simulation. The combined tube extrusion is analyzed by using a commercial finite element code. This simulation makes use of pipe material and punch geometry on the basis of punch geometry recommended by International Cold Forging Group. Deformation patterns and its characteristics in combined forward and backward tube extrusion process were analyzed for forming loads with primary parameters, which are various punch nose radius relative to backward tube thickness. The results from the simulation show the flow modes of pipe workpiece and the die pressure at the contact surface between pipe workpiece and punch. The specific backward tube thickness and punch nose radius have an effect on extruded length in combined extrusion. The combined one step forward and backward extrusion is compared with the two step extrusion fer forming load and die pressure.

• 한국해안해양공학회지
• /
• 제10권1호
• /
• pp.37-44
• /
• 1998

본 연구에서 제안하는 혼합 방법(hybrid method)은 흐름이 우세한 영역에서의 전송 문제를 정확하고 효과적으로 해결하기 위하여 개발된 것으로 오일러-라그란쥐적 방법과는 달리 전방추적에 의하여 이송 과정이 수행되므로 보간 기법이 불필요하고 무작위 행보에 의한 라그란쥐적 방법과 달리 유한 차분법에 의하여 확산 과정이 수행되므로 많은 입자가 요구되지도 않는다. 한 점에 순간적으로 부하되는 오염원과 연속적으로 부하되는 오염원에 대한 이론적인 해와 비교하여 확산 계수와 무관하게 상당히 만족할 만한 결과를 얻었다. 현 방법은 또한 2차원 상에서 주변 5격자로부터 보간하는 오일러-라그란쥐적 방법과 무작위 행보로 입자 추적하는 순수 라그란쥐적 방법과 비교하여 정확성은 물론 계산 시간에 있어서도 상당히 월등한 방법임이 입증되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.274-275
• /
• 2000

This paper introduces new ordering algorithms using the graph of data structure and forward/backward substitution of LU decomposition using recursive function. The performance of the algorithm is compared with Tinney's algorithm using 14 bus systems. Test results show that the new fill-in element of Jacobian matrix using the proposed ordering algorithm is same as that of Tinner scheme 3 and the forward/backward substitution can reduce the computation time

• 대한기계학회논문집A
• /
• 제41권1호
• /
• pp.63-68
• /
• 2017

이 논문에서는 열간 사상압연 공정에서 스트립 통판성의 안정성과 판 품질 향상을 위하여 새로운 선진율 학습모델 개발에 관한 연구를 수행한다. 먼저 기존의 선진율 해석모델에 대한 고찰을 통해 스트립 장력, 루퍼 각도 그리고 롤 주속이 선진율 학습에 크게 영향을 미치는 주요 압연 인자들임을 보인다. 두 번째로는 선진율 학습의 주요 압연 인자들을 이용하여 새로운 선진율 학습모델을 도출한 후, 보조변수 규명 알고리즘을 이용하여 이산시간계 학습모델을 규명한다. 끝으로 컴퓨터 시뮬레이션을 통해 이 논문에서 제안한 새로운 학습모델이 기존의 학습모델보다 유용함을 보인다.

• 전자공학회논문지B
• /
• 제33B권9호
• /
• pp.49-61
• /
• 1996

Back-propagation(BP) algorithm needs a lot of time to train the artificial neural network (ANN) to get high accuracy level in classification tasks. So there have been extensive researches to process back-propagation algorithm on parallel processors. This paper prsents a linear systolic array which calculates forward-backward propagation of BP algorithm at the same time using effective space-time transformation and PE structure. First, we analyze data flow of forwared and backward propagations and then, represent the BP algorithm into data dapendency graph (DG) which shows parallelism inherent in the BP algorithm. Next, apply space-time transformation on the DG of ANN is turn with orthogonal direction projection. By doing so, we can get a snakelike systolic array. Also we calculate the interval of input for parallel processing, calculate the indices to make the right datas be used at the right PE when forward and bvackward propagations are processed in the same PE. And then verify the correctness of output when forward and backward propagations are executed at the same time. By doing so, the proposed system maximizes parallelism of BP algorithm, minimizes th enumber of PEs. And it reduces the execution time by 2 times through making idle PEs participate in forward-backward propagation at the same time.

• 국제물리치료학회지
• /
• 제9권4호
• /
• pp.1663-1668
• /
• 2018

This study was conducted to examine the effects of Evjenth-Hamberg stretching of the sternocleidomastoid, upper trapezius, and pectoralis major on the lung function of adults with forward neck posture. The subjects were 20 adult students in P university located in Pohang, Korea, whose degree of head forward displacement measured according to NEW YORK state posture test was mild. The subjects were randomly and equally assigned to the Evjenth-Hamberg Stretching group (EHSG, n=10) and the control group (CG, n=10). Their forced vital capacity (FVC), slow vital capacity (SVC), and maximal voluntary ventilation (MVV) were measured before and after the experiment. In within-group comparison, only the EHSG experienced statistically significant improvement in FVC, forced expiratory volume in the first second (FEV1), and peak expiratory flow (PEE) after the experiment, compared to before the experiment (.05

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.111-115
• /
• 2002

The objective of this work is to develop improved slip factor model and correction method to predict flow through impeller in forward-curved centrifugal fan by investigating the validity of various slip factor models. Both steady and unsteady three-dimensional CFD analyses were performed with a commercial code tn validate the slip factor model and the correction method. The results show that the improved slip factor model presented in this paper could provide more accurate predictions for forward-curved centrifugal impeller than the other slip factor models since the presented model takes into account the effect of blade curvature. The comparison with CFD results also shows that the improved slip factor model coupled with the present correction method provides accurate predictions for mass-averaged absolute circumferential velocity at the exit of impeller near and above the flow rate of peaktotal pressure coefficient.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.147-149
• /
• 2000

This paper describes a power flow method for distribution systems, applying the method of symmetrical component to back/forward sweep method. The proposed algorithm is effective for unbalanced radial distribution system, with process of distributed resource(PQ & PV node), AVR(Auto Voltage Regulator), shunt capacitor. This proposed method compared conventional back/forward sweep method with the using three phase unbalanced distribution systems with 34 nodes.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.256-261
• /
• 2008

A CFD analysis of helicopter flowfield in forward flight is considered as non-trivial issue because of the complexity of vorticity-dominated flowfield. In this work, a study on the selection of the proper location for the installation of the Pitot probe is conducted using a CFD code which can deal with the interaction of rotor blade vortex and body. To describe the flow patterns for rotating rotor blades and body, the sliding mesh scheme is utilized. Pressure distributions and flow patterns are also analyzed to identify regions free from the interaction of body and wake induced from rotor blades.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.126-129
• /
• 2006

Many researchers have made an effort to explain flight mechanism of flapping insects. As a result, several unsteady mechanisms about lift generation in insect flight have been proposed. But it has a limits to elucidate insect's forward flight and abrupt thrust, because most of these are about insect's hovering flight. For this reason, the objective of this paper is to simulate "Figure-of-eight motion" of insect's wing during tethered flight for comprehending aerodynamic property in insect's forward flight.