본 연구는 레진 표면을 연마한 후 레진 표면 강화재를 도포한 것이 표면 처리하지 않은 군에 비해 칫솔질 마모시 표면 특성 즉, 표면 조도, 표면 자유 에너지, 마모율 등의 변화가 있는지 알아 보기 위해 시행하여 다음과 같은 결과를 얻었다(p=0.05). 1. 평균 조도는 Biscover < Forify < Polishing군 순이었다. 마모 전과 6개월에서는 모든 군에서 유의한 차이를 보였고, 1개월, 2개월, 3개월에서는 Polishing군과 Fortify군, Polishing군과 Biscover군에서 유의한 차이를 보였다. 2. 표면 자유 에너지는 마모 전은 Polishing군과 Biscover군, Fortify군과 Biscover군에서 유의한 차이를 보였고(Biscover < Fortify < Polishing), 1개월에서는 Polishing군과 Fortify군에서 유의한 차이를 보였으며, 2개월에서는 각 군간 유의한 차이를 보이지 않았다. 3개월에서는 Fortify군과 Biscover군에서 유의차를 보였고, 6개월에서는 Polishing군과 Fortify군, Fortify군과 Biscover군에서 유의한 차이를 보였다 (Fortify < Polishing < Biscover). 3. 마모율은 1개월에서 모든 군에서 유의차를 보였으며, 2개월에서는 군 간 유의차가 없었고, 3개월과 $4{\sim}6$개월 평균 마모율은 Polishing군과 Biscover군, Fortify군과 Biscover군에서 유의한 차이를 보였다. Fortify와 Biscover의 두께를 고려했을 때, Fortify는 2개월 내에, Biscover는 6개월 정도에 거의 소실되었다.
With regard of YinYang and Five Elements Theory, predominance of Yin or Yang is a key point to discuss Nourishin Ying or Reinforcing Yang. There are two major branches about studying predominance of Yin or Yang. Zhu Danxi advocated the theory that Yang was always in excess while Yin was often deficient, and thus belonged to the School for Nourishing the Yin. Zhang Jie-bin advocated that Yang is easily deficient while Yin is easily sufficient. It seems that they studied Wang Bing's 'Ministerial fire rule on all thing instead of Imperial Fire' and right Kidney Mingmen theory in Nan Jing, which are both related to the First Yang in the Book of Changes and say Mingmen fire is the host of the body. Zhu Danxi insisted that Mingmen fire was easily in excess and likely to become pathogenic fire while Water phase was easily in deficiency, so the doctors should nourish Yin and suppress Yang. Zhang Jie-bin said that Mingmen fire is vulnerable so the doctors should fortify yang and reinforce Mingmen fire. Suk Gock Master Lee thought that the Book of Changes and Nei Jing had a viewpoint of Fortify Yang as regards of some distinguished Physicians' articles about predominance of YinYang. The author's going to discribe Suk Gock's Fortify Yang Theory with viewpoints of Nei Jing and the Book of Changes.
본 연구의 목적은 5급 복합레진 수복물에 각종 레진 전색제를 적용한 후, 수복물의 교합면측과 치은측 변연 미세누출에 대한 레진 전색제의 감소효과를 평가하기 위하여 시행하였다. 40개의 발거된 대구치의 협면 치경부에 5급 와동을 형성하고 복합레진을 충전한 후, 사용된 레진 전색제에 따라 다음 과 같이 4개의 군으로 분류하였다; 복합레진 표면과 변연부에 레진 전색제를 적용하지 않은 대조군, 복합레진 표면과 변연부에 각각 레진 전색제를 적용한 Fortify Plus 군, BisCover 군 및 PermaSeal 군으로 분류하였다. 각 군의 시편을 실온의 증류수에 24시간 동안 보관한 후, $5^{\circ}C$와 $55^{\circ}C$에서 1,000회의 열 순환을 시행하고 2% methylene blue 용액에 4시간동안 침적시켰다. 각 치아는 저속의 diamond disk 를 이용하여 각 수복물의 중앙부를 따라 협, 설 방향으로 양분 하고 20배율의 광학 입체현미경 하에서 각각 교합면측과 치은측 변연 미세누출을 평가하였다. 각 군의 교합면측과 치은측 변연 미세누출에 대한 유의성을 검정을 시행하여 다음과 같은 결과를 얻었다. 1. 교합면측 변연 미세누출은 사용된 레진 전색제 간에 통계학적으로 유의한 차이를 나타내지 않았다. 2. 치은측 변연 미세누출은 대조군과 Fortify Plus 군이 PermaSeal 군보다 통계학적으로 높게 나타났으며, 또한 Fortify Plus 군은 Biscover 군보다 통계학적으로 높은 변연 미세누출을 나타내었다 (p < 0.05). 3. 대조군과 Fortify Plus 군은 교합면측 보다 치은측 변연에서 통계학적으로 더 높은 미세누출을 나타내었다 (p < 0.05). 4. BisCover 군과 PermaSeal 군은 교합면측과 치은측의 변연 미세누출 간에 통계학적으로 유의한 차이를 나타내지 않았다. 본 연구를 종합하면, 5급 복합레진 수복물의 교합면측 변연 미세누출에 대한 레진 전색제의 감소효과는 크게 나타나지 않았지만, 치은측 변연 미세누출에 대한 레진 전색제의 감소효과는 사용된 레진 전색제에 따라 서로 다르게 나타났다.
Despite the improvements in bond strengths of dentin adhesives and resin-modified glass ionomers, the marginal seal of cervical restorations remains a concern. Microleakage at poorly sealed margins can result in staining, post-operative sensitivity, pulpal irritation, and recurrent caries. The objective of this study was to evaluate the effect of surface penetrating sealant(SPS) on the microleakage of cervical restorations. 45 extracted human teeth were selected, and Class V preparations were prepared on the both buccal and lingual surface of the teeth to the following dimensions : 1.5mm axially, 3mm mesiodistally, and 3mm incisogingivally. After cervical restoration with composite resin, compomer, glass ionomer each restoration was treated as three methods: No Tx., Scotchbond Multipurpose Adhesive$^{\circledR}$, Fortify$^{\circledR}$. The sections were examined with a stereomicroscope to determine the extent of microleakage at enamel and dentin margins. The results of this study were as follows. 1. All groups showed some microleakage. 2. Gingival cavity wall with cementum margin showed significantly higher leakage value than occlusal cavity wall with enamel margin. 3. The group treated with SPS showed significantly lower leakage value than no treated group(p<0.05). But there is no difference between Fortify$^{\circledR}$ and Scotchbond Multipurpose adhesive$^{\circledR}$. The results of this study suggest that SPS are effective in reducing microleakage of class V restorations. But it is certain that some microleakage still occurred despite the application of SPS.
International Journal of Internet, Broadcasting and Communication
/
제16권1호
/
pp.269-279
/
2024
The study explores the evolving landscape of overseas expansion strategies by Korean corporations, focusing on recent geopolitical tensions, the COVID-19 pandemic, and disruptions in global supply chains. It emphasizes the challenges faced by industries producing high-value products and delves into the concept of "Friend-Shoring" policies in the United States, leading major Korean companies to invest in local semiconductor, battery, and automotive factories. Recognizing the potential fragmentation of Korea's manufacturing sector, the paper introduces the "Mother Factory" strategy as a policy initiative, inspired by Japan's model, to establish core production facilities domestically. The discussion unfolds by examining the cases of major companies in Japan and the United States, highlighting the need for Korea to adopt a mother factory strategy to mitigate risks associated with friend-shoring policies. Inspired by Intel's "Copy Exactly" approach, the paper proposes a Korean mother factory model integrating smart factory technology and digital twin systems. This strategic shift aims to enhance responsiveness to geopolitical challenges and fortify the competitiveness of Korean high-tech industries. Finally, the paper proposes a Korean Mother Factory based on smart factory concepts. The suggested model integrates smart factory technology and digital twin frameworks to enhance responsiveness and fortify competitiveness. In conclusion, the paper advocates for the adoption of a comprehensive Korean Mother Factory model to address contemporary challenges, foster advanced manufacturing, and ensure the sustainability and competitiveness of Korean high-tech industries in the global landscape. The proposed strategy aligns with the evolving dynamics of the manufacturing sector and emphasizes technological advancements, collaboration, and strategic realignment.
연구목적: 본 연구의 목적은 복합 레진(Z250)으로 수복한 5급 와동에서 변연부 미세누출에 대한 3종의 레진 표면 전색제(Fortify, Permaseal, Biscover LV)의 효과를 평가하는 것이다. 연구 재료 및 방법: 3개월 이내에 발거된 건전한 40개의 소구치와 대구치에 백악-법랑 경계를 중심으로 교합측 변연은 법랑질에, 치은측 변연은 백악질에 위치하도록 5급 와동을 협면과 설면에 각각 형성하였다. Clearfil SE bond와 복합 레진으로 충전한 치아를 무작위로 4개의 군으로 분류한 후 대조군을 제외한 실험군은 각각 20개의 와동에 레진 표면 전색제 3가지 제품을 각각 적용하고 24시간동안 생리식염수에 보관하였다. 보관한 시편을 열순환시킨 후 24시간 동안 2% methylene blue 염색 용액에 담가 두었다가 투명 레진에 매몰하였다. 매몰한 시편을 협설면의 충전물 중앙을 지나도록 절단한 후 현미경을 사용하여 교합면측과 치은측 변연부의 염색 용액의 침투도를 관찰함으로써 미세누출 여부와 정도를 분석하였다. 결과: 복합레진으로만 수복한 대조군은 실험군에 비해 교합면측과 치은측에서 미세누출이 컸으며 통계적으로 유의한 차이가 있었다(P<0.05). 레진 표면 전색제를 적용한 실험군들 사이에는 교합면측과 치은측 모두 통계적으로 유의한 차이가 없었다(P>0.05). 각 군의 교합면측과 치은측의 변연 미세누출을 비교 시 통계적으로 유의한 차이가 없었다. Fortify는 대조군과 비교시 치은측에서는 통계적으로 유의한 미세누출 감소 효과가 없었다. 결론: 복합레진으로 충전한 5급 와동 변연에 레진 표면 전색제를 적용한 경우 교합면측과 치은측 변연에서 미세누출 감소 효과가 있었다. 그러나 치은측 변연은 레진 표면 전색제의 적용 후에도 미세누출을 보이므로 각별히 주의를 요해야 할 것으로 사료된다.
The purpose of this study was to evaluate and compare the effectiveness of various low-viscosity resin systems used as rebonding agents to prevent microleakage at the margins of class I composite resin restorations. Seventy sound human premolars were selected for experiment. Class I cavities were prepared and each cavity was conditioned with a 37% phosphoric acid for 15 sec, rinsed with water for 15 sec, and dried with compressed air. Bonding agent(Scotchbond Multipurpose, 3M Co.) was applied and a hybrid composite resin (Z-100, 3M Co.) was placed using an incremental technic. The excess cured composite resin was carefully removed with Sof-Lex discs(3M Co.) to expose the original margins of the cavity. The following seven groups were established : group 1 was not rebonded and used as control group ; group 2 was rebonded with a Scotchbond Multipurpose(3M Co.) and finished ; group 3 was rebonded with a Fortify(BISCO) and finished ; group 4 was rebonded with a Concise white sealant(3M Co.) and finished ; group 5 was rebonded with a Concise white sealant(3M Co.) and not finished ; group 6 was rebonded with a P&F sealant(BISCO) and finished; group 7 was rebonded with a P&F sealant(BISCO) and not finished. The specimens were then subjected to 500 thermocycles between 5 & 65 with a 10 see dwell time and immersed in 2% methylene blue dye solution for 24 hours and sectioned with low-speed diamond cutter into two part under water condition. The extent of microleakage at rebonded margins was evaluated microscopically and scored for dye penetration according to the following scale : 0=no dye penetration ; 1=dye penetration to half-way along axial wall between enamel surface and DEJ ; 2=dye penetration beyond halfway along axial wall between enamel surface and DEJ ; 3=dye penetration to the full depth of DEJ or beyond DEJ. Selected samples were prepared for SEM observation to determine the depth of penetration of the rebonding agent into the marginal interface. The obtained results were as follows: 1. In the group 2 and 3, which is rebonded with a Scotchbond Multipupose and Fortify, dye penetration score were decreased significantly than that of group 1 (P<0.05), but group 4 and 6 were not statistically different from group 1(P>0.05). 2. There were significant differences between group 4, 6 and group 5, 7 when compared by dye penetration score (P<0.05). 3. In the SEM observation, Scotchbond Multipurpose and Fortify were penetrated within $30-40{\mu}m$ depth of the outermost surface. However, both sealants were failed to penetrate into the debonded interface.
The present study was designed to develop a microencapsulated L-ascorbic acid and iron that could be used to fortify milk and to determine the sensory properties of milk fortified with microencapuslation. Coating material was medium-chain triacylglycerol (MCT), and selected core material was ferric ammonium sulfate and L-ascorbic acid. The highest efficiency of microencapsulation was 95.0% in the ratio of 15:1 as coating to core material. Ascorbic acid release was increased sharply up to 5 d storage as 6.5%. TBA value was the lowest when both capsulated iron and ascorbic acid were added during 12 d storage, compared with other treatments. In sensory analysis, most aspects were not significantly different between control and capsulated ascorbic acid fortified milk at 5 d storage. The present study indicated that the use of microencapsulated ascorbic acid with MCT is effective for fortifying milk. In addition, these results suggest that acceptable milk products can be prepared with microencapsulated ascorbic acid and iron.
This study attempts to provide the foundation for a possibility that industrial su n.0, pporting organization can be strong information centers if they fortify their information dissemination activities, along with the basic functions. The following conclusions are resulted from the analysis in the operations of libraries, service methods and their publications of the information activities provided by the industrial su n.0, pporting organizations. First, the organizations have not be acquiring enough information materials. The services for bibliographic information should guarantee the uses of original documents. Second, the number of organizations providing on-line information services has been increasing, but the provided materials are nothing but their own materials produced during performing the basic functions. Third, the speedy information provision and efficient information dissemination for the end-users in the distance may be possible through on-line service, but it requires information analysis function to select the necessary information in our industrial environment. Forth, th information activities provided by the libraries of industrial su n.0, pporting organizations should be fortified.
This study attempts to provide the foundation that KINITI and industrial su n.0, pporting organizations can be strong information analysis centers if they fortify their information analysis activities. The following conclusions are resulted from the analysis in the state-of-the-art-report covered in national information flow system, service methods and their publications of the information analysis activities provided by the KINITI and industrial su n.0, pporting organizations. First, the KINITI and industrial su n.0, pporting organizations have not be acquiring enough information materials. The services for bibliographic information should guarantee the uses of original documents. Second, the number of organizations providing on-line information services has been increasing, but the provided materials are not sufficiently suited for user's requests. Third, the speedy information provision and efficient information dissemination for the end users in the long distance may be possible through on-line service, but it requires information analysis procedure to select the necessary information in our industrial environment. Forth, the information activities provided by the libraries of industrial su n.0, pporting organizations should be fortified.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.