• 대한조선학회논문집
• /
• 제39권3호
• /
• pp.64-74
• /
• 2002

선체 휘핑 해석 전용 프로그램은 모멘텀 슬래밍 이론을 사용하여 비선형 유체충격력을 추정하였으며, Timoshenko 보이론에 기초하여 선체 hull girder를 탄성체로 모델링하고 있다. 개발된 프로그램에 대하여 슬래밍 충격력의 효과, 유탄성해석의 효과 그리고, 선속, 파고, 파장 등 각종 설계 변수가 미치는 효과 등에 관한 검증 계산을 수행하였고, 실제 선박 설계에의 적용 예를 보임으로써 본 프로그램의 설계 활용성을 확인하였다. 본 프로그램은 각종 입출력자료의 GUI 처리 및 선박 운동에 대한 시뮬레이션 제공 등 다양한 기능과 특성을 가지고 있다.

• 대한조선학회지
• /
• 제17권1호
• /
• pp.25-29
• /
• 1980

For the preliminary estimation of the vertical hull natural frequency, the Schlick's or Schlick-type formulae have been traditional ones and are still in common use today. Some investigators have made their efforts, based on statistical data of ships' system parameters, to extend the applicability of Schlick-type formulae to higher modes, or to utilize the Rayleigh method. For instance, the work done by Dinsenbacher et al.[5] belongs to the former and that of Nagamoto et al.[6] to the latter. In a part of his previous paper[7], the author, investigating the case of a cargo ship of medium size, suggested that provided statistically simplified curves such as trapezoid of system parameter distributions are available in hands, direct utlization of an ordinary computer program can be also an another convenient method by which we can obtain both natural frequencies and normal mode shapes. In this paper, to confirm the feasibility of the above suggestion, four high speed boats are investigated. The system parameters of them are originally given in [5]. The computer program used here is one confiled based on a calculation method derived from Myklestal-Prohl modeling of hull, transfer matrix formulation and an extended Gumbel's initial value method for solving frequency equation. The results of the investigation show that the direct calculation based on statistically oriented and reasonably assumed trapezoidal mean curves of system parameter distributions can give us natural frequencies within about 5% deviation up to several-noded modes and normal mode shapes serviceable at least up to 4- or 5-noded modes in comparision with those based on actual distributions of system parameters. For this simplified method the actual data required for input are only of ship length, displacement, total added mass, bending and shear rigidity at amidship. They are available at the early stage of design. By this method we can also easily trace variations of vibration characteristics in the course of ship design cycles.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.250-257
• /
• 2007

Characteristics of color application indicated from Kirchsteigfeld is presented the various points of view to be preserved urban housing color. It had been handled as environmental color by view point of community and connectivity rather than color scheme of single housing. First, color to be consisted of basis for urban entirely as background color in urban housing complex has been indicated the bright and cheerful feelings and expressed to be introduced mostly from the single color system. Second, characteristics to be inhibited strongly from housing complex had been indicated by restricted four types of color, formulated the overall context and change through accent and the change from disposition of principal and the accessary of color scheme. In this case, it was not regular formulation, but as a whole category view, it could be provided by orderly regularity system strictly Particularly it had been applied as a whole for lightness change by single color, introduced the different color of building to be centered or remained by a visual point. This had been formed to introduction of color by stand points of housing group not introduction to color by sole concept of building. Third, emphasizing of morphologic feeling by using of difference of lightness, it could be indicated the mild and comfortable stereo-type sensibility from the overall types of housing, we could understand for formation of color code by lightness of slightly differences. Fourth, it had been taken the convenient adaptation method for maintenance of simple graphic system as a environmental color. It has considerable advantage for sustainability of color to indicate on finishing material, form and detail in architecture, as the sole separated color not to be complicated when to be painted over and again or managed continuously.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.161-170
• /
• 2010

교량구조물의 지진재해평가기술을 개발하기 위해서는 전체 교량에 대한 분류체계별 표준교량을 선정한 후, 간편한 정식화 방법을 통해 지진취약도를 분석하고, 이로부터 교량의 근사적인 지진위험도를 평가하는 것이 현실적이라 할 수 있다. 본 연구에서는 HAZUS에서 사용 중인 간편하면서도 실용적인 방법을 미국과 국내의 내진설계수준 등을 고려하여 국내 PSC-I 거더교에 적용 가능하도록 '수정된 HAZUS 방법에 의한 한국형 지진취약도함수'를 개발하였다. 이를 위해 국내 표준교량 형식 중 하나인 PSC-I 거더교에 대해 수치해석적 방법을 적용하여 해석적 지진취약도함수를 구하고, 수정된 HAZUS 방법을 적용하여 지진취약도함수를 구한 후 그 결과를 비교 분석하였다. 수정된 HAZUS 방법에서의 주요 계수는 수치해석적 방법에 의한 지진취약도함수와 가장 유사한 경향을 보이도록 하는 계수를 선택하는 방법으로 결정하였으며, 강도감소계수의 경우 HAZUS에서 제시한 값의 70% 수준을 사용할 때 해석적 결과와 유사한 지진취약도 함수를 구할 수 있음을 알 수 있었다.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.351-366
• /
• 2016

Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.

• Structural Engineering and Mechanics
• /
• 제77권4호
• /
• pp.441-461
• /
• 2021

Reinforced concrete (RC) columns are crucial in building structures and they are of higher vulnerability to terrorist threat than any other structural elements. Thus it is of great interest and necessity to achieve a comprehensive understanding of the possible responses of RC columns when exposed to high intensive blast loads. The primary objective of this study is to derive analytical formulas to assess vulnerability of RC columns using an advanced numerical modelling approach. This investigation is necessary as the effect of blast loads would be minimal to the RC structure if the explosive charge is located at the safe standoff distance from the main columns in the building and therefore minimizes the chance of disastrous collapse of the RC columns. In the current research, finite element model is developed for RC columns using LS-DYNA program that includes a comprehensive discussion of the material models, element formulation, boundary condition and loading methods. Numerical model is validated to aid in the study of RC column testing against the explosion field test results. Residual capacity of RC column is selected as damage criteria. Intensive investigations using Arbitrary Lagrangian Eulerian (ALE) methodology are then implemented to evaluate the influence of scaled distance, column dimension, concrete and steel reinforcement properties and axial load index on the vulnerability of RC columns. The generated empirical formulae can be used by the designers to predict a damage degree of new column design when consider explosive loads. With an extensive knowledge on the vulnerability assessment of RC structures under blast explosion, advancement to the convention design of structural elements can be achieved to improve the column survivability, while reducing the lethality of explosive attack and in turn providing a safer environment for the public.

• 한국추진공학회지
• /
• 제26권1호
• /
• pp.98-106
• /
• 2022

고고도에서 작동하는 신뢰성 있는 이중펄스 추진기관을 개발하기 위해서는 안정적인 진공 점화 기술과 펄스분리장치(PSD, Pulse Separation Device) 설계기술이 요구된다. 본 연구에서는 이중펄스 추진기관 격막형 펄스분리장치(Membrane Type Pulse Separation Device)의 파열압력 분석기법을 개발하였다. 변형률-압력 관계를 이용하여 PSD 파열압력에 대한 관계식을 도출하였다. 고고도 진공환경을 모사할 수 있는 PSD 진공파열 시험장치와 PSD 1초급 진공점화 시험장치를 개발하였다. PSD 진공파열시험을 수행하여 파열압력을 분석하고 PSD 설계 값을 도출하였다. 최종적으로 PSD 1초급 진공점화 시험을 통해 이중펄스 추진기관의 PSD 설계 파열압력과 추진제 진공점화 성능을 확인하였다.

• 한국건축시공학회지
• /
• 제23권3호
• /
• pp.261-272
• /
• 2023

본 연구는 현재 늘어나고 있는 수소 충전소 및 ESS 시설 등에서 예상치 못한 사고로 발생할 수 있는 폭발 위험과 이로 인한 구조물 방호 기술의 중요성에 초점을 맞추고 있다. 시멘트 복합체의 보강 방법에 따른 내충격 특성을 평가하여 구조물의 방호 설계를 위한 기초 데이터를 제시하였다. 실험결과 가장 기본적 구조재료인 철근콘크리트는 내충격 성능에 미치는 보강효과가 무근 콘크리트에 비해 약 20% 향상되는 것으로 나타났으며, 고속충격과 같은 빠른 하중에 대해서는 국부적 보강보다는 섬유와 같이 매트릭스 전체를 보강하는 방법이 효과적인 것으로 확인되었다.

• 한국식생활문화학회지
• /
• 제25권6호
• /
• pp.779-787
• /
• 2010

The principal objective of this study was to determine the optimal mixing conditions for three amounts of onion powder, sugar, and butter to prepare onion powder cookies. The experimental design was based on the central composite design methodology of response surface, which included 16 experimental points including two replicates for onion powder, sugar, and butter. The mechanical and sensory properties of the cookies were measured, and these values were applied to the mathematical models. A canonical form and perturbation plot showed the influence of each ingredient on the mixed final product. The results of the spread ratio did not show significant results, but hardness increased with increasing quantities of onion powder and sugar but decreased with butter (p<0.01). The color lightness "L" value increased with increasing quantities of sugar and butter but decreased with added onion powder. In contrast, the redness color "a" value increased with increasing quantities of onion powder and sugar. Sugar did not affect the yellowness color "b" value, but the color b value increased with increasing onion powder and sugar. The results of a sensory evaluation using the predicted model showed significant values for flavor (p<0.01), texture (p<0.05), taste (p<0.05), and overall quality (p<0.01). As a result, the optimum formulation by numerical and graphical methods was calculated as 12.58 g onion powder, 35 g sugar, and 52.38 g butter.

• Steel and Composite Structures
• /
• 제48권2호
• /
• pp.113-130
• /
• 2023

The present manuscript aims to investigate the deviation between the middle surface (MS) and neutral surface (NS) formulations on the static response of bi-directionally functionally graded (BDFG) porous plate. The higher order shear deformation plate theory with a four variable is exploited to define the displacement field of BDFG plate. The displacement field variables based on both NS and on MS are presented in detail. These relations tend to get and derive a new set of boundary conditions (BCs). The porosity distribution is portrayed by cosine function including three different configurations, center, bottom, and top distributions. The elastic foundation including shear and normal stiffnesses by Winkler-Pasternak model is included. The equilibrium equations based on MS and NS are derived by using Hamilton's principles and expressed by variable coefficient partial differential equations. The numerical differential quadrature method (DQM) is adopted to solve the derived partial differential equations with variable coefficient. Rigidities coefficients and stress resultants for both MS and NS formulations are derived. The mathematical formulation is proved with previous published work. Additional numerical and parametric results are developed to present the influences of modified boundary conditions, NS and MS formulations, gradation parameters, elastic foundations coefficients, porosity type and porosity coefficient on the static response of BDFG porous plate. The following model can be used in design and analysis of BDFG structure used in aerospace, vehicle, dental, bio-structure, civil and nuclear structures.