• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.322-326
• /
• 2000

This paper is concerned with the development of remote vibration measurement system using the internet. Recently, various techniques are developed based on the advance of the internet environment. In this study, we developed the remote vibration measurement system using the internet server programming technique, the client programming technique, the GPIB programming, and the A/D, D/A programming techniques. Hence, we can control the measurement devices remotely. The feasibility of the system is validated using the experimental setup. The output of the D/A is connected to the small exciter and the piezoceramic sensor is connected to the A/D port. By sending out the exciting signal to the structure, we can collect the response. The experiment shows that the proposed idea works well. Another experiment consists of the function generator and the low-pass filter circuit. The wave form, amplitude, and the frequency of the function generator is controlled by the GPIB program and the output of the circuit is collected by the A/D port. The output is then displayed in HTML format.

• Korean Journal of Mathematics
• /
• v.32 no.3
• /
• pp.485-496
• /
• 2024

In this study, we examine ℓ-quasi-cyclic self-dual codes of length ℓm over 𝔽₂, provided that the polynomial X^m - 1 has exactly four distinct irreducible factors in 𝔽₂[X]. We find the standard form of generator matrices of codes over the ring R ≅ 𝔽_q[X]/(X^m - 1) and the conditions for the codes to be self-dual. We explicitly determine the forms of generator matrices of self-dual codes of lengths 2 and 4 over R.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.66-72
• /
• 2020

In this study, a method for increasing the initial water supply was employed to protect the water injection nozzle by the flame when supplying the water to the steam generator. During the initial steam generator test, the flow rate was controlled by using the only venturi, but cooling water was not supplied to the combustion chamber at the beginning of combustion, thereby resulting in damage to the water nozzle. To solve this problem, a venturi and an orifice were configured in parallel to increase the initial supply flow rate to form a differential pressure between the water manifold and the combustion chamber. Venturi and orifice supply sequences were established through the water flow tests, and combustion tests were conducted for final verification. Consequently, a continuous supply of the cooling water at the beginning of combustion was achieved, and the experiment was successfully performed without damaging the cooling water nozzle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1361-1368
• /
• 2005

The structural and leakage integrity of steam generator tubes should be sustained all postulated loads with appropriate margin even if a crack is present. During the past three decades, for effective integrity evaluation, several limit load solutions have been used world-widely. However, to predict accurately load carrying capacities of specific components under different conditions, the solutions have to be modified by using lots of experimental data. The purpose of this paper is to propose a new burst pressure estimation scheme based on fracture mechanics analyses for steam generator tube with an axial or circumferential through-wall crack. A series of three dimensional elastic-plastic finite element analyses were carried out and, then, closed-form estimation equations with respect to both J-integral and crack opening displacement were derived through reference stress method. The developed engineering equations were utilized for structural integrity evaluation and the resulting data were compared to the corresponding ones fiom experiments as well as limit load solutions. Thereafter, since the effectiveness was proven by promising results, it is believed that the proposed estimation scheme can be used as an efficient tool for integrity evaluation of cracked steam generator tubes.

• International Journal of Advanced Culture Technology
• /
• v.8 no.4
• /
• pp.294-298
• /
• 2020

We was constructed of the spread movement with tremor layer point by the tractile-dot structure that was analyzed the squirm quake forms of the perception movement on the atom liquid. Algorithm of squirm quake forms was used to move the spread tremor on the atom state. To detect the tiny signal, we compared the association average value of the squirm quake form on the atom state. Their subject were issued the valuation standard and perception movement for basic atom condition by the spread tremor. We take to detect the tiny scores of average during perception movement side from the spread tremor that magnetic condition get to a variation of the Ma-αAVG and Ma-αMAX-MIN with 6.25±0.35 units, that electric condition get to a variation for the El-αAVG and El-αMAX-MIN with 5.68±0.42 units. The spread tremor was to investigate the capacity of the tremor form, to uptake a spread data of spread tremor level on the CCPL that was denoted the calm-classification form by the spread perception level system. As the squirm quake forms was demanded by the spread tremor signal, max-average values of perception movement were checked the spread position for association average data. We make mention of squirm quake forms for a signal association and a quake data signal of relation system.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.62-64
• /
• 2006

본 논문에는 영구자석 내삽형 동기 발전기의 기전력 특성에 해석에 관한 연구이다. 기전력 해석시 측정값과 시뮬레이션의 값의 차이의 원인 중 하나를 영구자석에 있다고 가정 하고 이에 대한 영향을 자석을 세그먼트화 하여 비교 실험하였다. 실제 측정값과 시뮬레이션의 기전력의 차이의 원인에 대해 비교하였다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.193-196
• /
• 2000

In the turbine-blade manufacturing industry, turbine-blades are machined and then are assembled to form a circular roll of blades. The roll of blades should be balanced as much as possible, since otherwise the efficiency of the turbine generator might degrade. We propose a heuristic method for balancing blades based on the number partitioning algorithm. The proposed method outperformed existing methods remarkably in terms of the accuracy with a negligible increase in the running time.

• Journal of the Chungcheong Mathematical Society
• /
• v.27 no.4
• /
• pp.571-579
• /
• 2014

In this paper, we present new vector generators of a matrix subalgebra $L_{0,n}$, which is isomorphic to the Clifford algebra $C{\ell}_{0,n}$, and we obtain the matrix form of inverse of a vector in $L_{0,n}$. Moreover, we consider the solution of a linear equation $xg_2=g_2x$, where $g_2$ is a vector generator of $L_{0,n}$.

• Science of Emotion and Sensibility
• /
• v.12 no.1
• /
• pp.129-136
• /
• 2009

Unlike former researches, this study for developing the caricature generator began observing the methods that other caricature experts have adopted. According to the observation, it seemed that experts tried to exaggerate characteristics of the target shape from other similar objects. When we are saying "This is similar to that," we give salience to their difference among the identical form groups. This study was to find the most similar geometry form to the target shape and then to transform its form through exaggeration. The research scope was restricted to exaggerate the outline shape of two-dimensional looped curve as a caricature form. For this, the author discussed the following: (a) organization method of four kinds of similar geometry form database, (b) search method to find the pertinent similar geometry form, (c) arrangement method for those searched data, and (d) method to exaggerate the target shape. Human faces and cars were selected as research categories to make the database. According to the survey over the transformed results, it was proved its possibility.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.895-908
• /
• 2018

As modern science is developed and advanced, examination and number of times using radiation are increasing daily. General diagnostic X-ray generator is installed on stationary form, But X-ray generator was developed because patient who is in the intensive care unit, operation room, emergency room can not move to general x-ray room. What we examine patient by x-ray generator is certainly necessary, So patient exposure is inevitable. but reducing radiation exposure is highly important matter about radiation technology, guardian, patient in the same hospital room, nurse etc. For this reason, rule regarding safety control of diagnostic x-ray generator revised for radiation worker, patient and protector proclaim that mobile diagnostic x-ray shield must placed in case of examine different location excluding operation room, emergency room, intensive care unit. But, radiogical technologist is having a lot of difficulties to examine with mobile x-ray generator, diagnostic x-ray shield partition, image plate and lead apron. So, when we use x-ray generator, we manufacture shield tools can be attached to the mobile x-ray generator On behalf of x-ray shield partition and conduct analysis and in comparison to part of body and distribution of dose rate and find way to reduce radiation exposure through distribution of dose rate of patient within the radiogical technologist, medical team. Mobile x-ray generator aimed at SHIMADZU inc. R-20, We manufactured equipment for shielding x-ray scattered x-ray by installing shielding wall from side to side based on support beam on the mobile x-ray generator. Shielding wall when moving can be folded and designed to expand when examine. Experiment measured five times in each by an angle for dose rate of eyes, thyroid, breast, abdomen and gonad on exposure condition of upper and lower extremity, chest, abdomen which is examined many times by mobile x-ray generator. We used dosimeter RSM-100 made by IJRAD and measured a horizontal dose rate by body part. The result of an experiment, shielding decreasing rate of the front and the rear showed 77 ~ 98.7%. Therefore using self-production shielding wall reduce scattered x-ray occurrence rate and confirm can decrease exposure dose consequently. Therefore, through this study, reduction result which is used shielding wall of self-production will be a role of shielding optimization and it could be answer about reduction of medical exposure recommended by ICRP 103.