• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2307-2309
• /
• 2004

This paper presents a modeling and simulation of a fuzzy controller for maximum power extraction of a grid-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm for a wind turbine and proposes, in a graphical form, the relationships of wind turbine output, rotor speed, power coefficient, tip-speed ratio with wind speed when the wind turbine is operated under the maximum power control. The control objective is to always extract maximum power from wind and transfer the power to the utility by controlling both the pitch angle of the wind turbine blades and the inverter firing angle. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor angle and rotor speed, pitch angle, and generator output.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.514-520
• /
• 2001

A 300Wh class flywheel energy storage system using high Tc superconductor bearings(HTC SFES) is being developed by KIMM and KEPRI. HTC SFES consists of a flywheel rotor, superconductor bearings, a motor/generator and its controller, touch-down bearings, vacuum chamber, etc. Stiffness and damping values of superconductor bearings were experimentally estimated to be 67,700N/m and 29Ns/m respectively. The present HTC SFES was designed to have maximum operating speed of 33000 rpm, which is far above 2 rigid body mode critical speeds of 645rpm and 1,275rpm. Leaf-spring type touch-down bearing were utilized to have the system pass safely through the system critical speeds. It has been experimentally verified that the system can run stably up to 28,000 rpm so that HTC SFES is now expected to reach up to its maximum design speed of 33,000rpm without any difficulties. The Halbach array motor & generator has also been proven its effectiveness on transferring electrical energy to a rotaing composite flywheel in kinetic form.

• 건축역사연구
• /
• 제14권4호
• /
• pp.157-175
• /
• 2005

Guarino Guarini(1624-1683) is one of great Baroque architects who developed new spatial concept in architecture. He refused to static space typically appeared in Renaissance architecture. Instead, to make it possible to generate complicate form and moving space, he made use of generative diagram. It provide him with an abstract machine to generate automatically architectural inferiority. His generative diagram consists of three types: single circle diagram, matrix diagram and longitudinal diagram. The first diagram uses single circle as primary generator and develop this by means of overlap and equiangular division. La Cappella della Santissima Sindone, Sanctuary of Chiesa di Oropa, Chiesa dei Padri Somaschi, San Gaetano are designed according to this diagram. The generator of the second diagram is nine circles in $3{\times}3$ matrix, which provide the base for the interpenetration of space in Guarini's architecture. He inspired this diagram from Kepler's $\ulcorner$Harmonices mundi$\lrcorner$. The Churches of San Lorenzo, Ste-Anne-la-Royale, San Filippo Neri, San Gaetano are generated by this diagram. The third diagram has several circles in Lantin-cross plan. Guarini adopted this diagram because he had chances to design several churches in Northern Europe. The churches of Santa Maria di Ettinga, Immacolata Concezione, San Maria della Divina Providenza, Church without Name, San Filippo Neri are representative examples for this diagram.

• 한국광학회지
• /
• 제26권5호
• /
• pp.255-260
• /
• 2015

본 논문에서는 MAC(metal-assisted chemical) 에칭을 이용하여 Ge(Germanium) 표면에 나노구조를 형성하고, 그 위에 열팽창계수가 높은 PDMS를 적용하여 광음향효과를 이용한 초음파 발생 소자를 제작하였다. Ge 나노구조 위에 PDMS를 스핀 코팅하여 만든 초음파 발생 소자는 100 nm Cr(Chromium) 대비 약 3배의 초음파를 발생시켰다. 또한, Ge 나노구조를 PDMS 중앙에 위치시 킬 경우 쿼츠 기판을 통한 열손실이 줄어들어 100 nm Cr 대비 8.5배의 강한 초음파를 얻을 수 있었다.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.123-129
• /
• 2016

The morphology, crystal structure and size of aerosol nanoparticles generated by erosion of electrodes made of different materials (titanium, copper and aluminum) in a multi-spark discharge generator were investigated. The aerosol nanoparticle synthesis was carried out in air atmosphere at a capacitor stored energy of 6 J, a repetition rate of discharge of 0.5 Hz and a gas flow velocity of 5.4 m/s. The aerosol nanoparticles were generated in the form of oxides and had various morphologies: agglomerates of primary particles of $TiO_2$ and $Al_2O_3$ or aggregates of primary particles of $Cu_2O$. The average size of the primary nanoparticles ranged between 6.3 and 7.4 nm for the three substances studied. The average size of the agglomerates and aggregates varied in a wide interval from 24.6 nm for $Cu_2O$ to 46.1 nm for $Al_2O_3$.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1445-1449
• /
• 2007

This paper presents the DOD (Drop-On-Demand) characteristic using the electrostatic field induced inkjet printing system. In order to achieve the DOD characteristic of electrostatic field induced inkjet printing, applied the bias voltage of 1.4 kV and the pulse voltage of $2.0\;kV\;{\sim}\;2.7\;kV$ using high voltage pulse generator. Electrostatic field induced droplet ejection is directly observed using a high-speed camera and for investigated DOD characteristic, CNT ink used. The electrostatic field induced inkjet head system has DOD characteristic using pulse generator which can be applied pulse voltage. The bias voltage has a good condition which form meniscus and has micro dripping mode for small size micro droplet. Also, the droplet size decreases with increasing the applied pulse voltage. This paper shows DOD characteristic at electrostatic field induced inkjet head system, Therefore. electrostatic DOD inkjet head system will be applied industrial area comparing conventional electrostatic inkjet head system.

• 한국멀티미디어학회논문지
• /
• 제11권12호
• /
• pp.1765-1774
• /
• 2008

Due to recent increase of product placement(aka. PPL) in TV drama and entertainment program, the audience of these programs is exposed to the advertisement in the form of the props and backgrounds without discernment. Advancement in digital data broadcasting technology enabled advertisers to insert detailed information of the product or associated advertisement link into the content of the broadcast program as an interactive advertisement. With the interactive advertisement, the audience can focus on the content of the program and the advertiser can create an advertisement with a rich content through the interaction between the advertisement and the audience. It is possible because the interactive advertisement is dynamic advertisement behavior only activated by the audience's intention. In this research, we develop a Hot-spot generator to insert interactive advertisement in the DMB broadcast program. We also suggest dynamic Hot-spot generation technique that allows the Hot-spot object to follow not only the shape of the advertising object in the program, but also the movement of the object as the program progresses.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.460-467
• /
• 2010

In this study, the parameters of the feedwater control system (FWCS) of the OPR1000 type nuclear power plant (NPP) are optimized by response surface methodology (RSM) in order to acquire better level control performance from the FWCS. The objective of the optimization is to minimize the steam generator (SG) water level deviation from the reference level during transients. The objective functions for this optimization are relationships between the SG level deviation and the parameters of the FWCS. However, in this case of FWCS parameter optimization, the objective functions are not available in the form of analytic equations and the responses (the SG level at plant transients) to inputs (FWCS parameters) can be evaluated by computer simulations only. Classical optimization methods cannot be used because the objective function value cannot be calculated directely. Therefore, the simulation optimization methodology is used and the RSM is adopted as the simulation optimization algorithm. Objective functions are evaluated with several typical transients in NPPs using a system simulation computer code that has been utilized for the system performance analysis of actual NPPs. The results show that the optimized parameters have better SG level control performance. The degree of the SG level deviation from the reference level during transients is minimized and consequently the control performance of the FWCS is remarkably improved.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.18-27
• /
• 2019

The Advanced Power Reactor 1400 (APR1400) Steam Generator (SG) uses alloy 690 as a tube material and SA-508 Grade 3 Class 1 as a tubesheet material to form tube-to-tubesheet joint through hydraulic expansion process. In this paper, the residual stresses in the SG tube-to-tubesheet contact area was investigated by applying Model-Based System Engineering (MBSE) methodology and the V-model. The use of MBSE transform system description into diagrams which clearly describe the logical interaction between functions hence minimizes the risk of ambiguity. A theoretical and Finite Element Methodology (FEM) was used to assess and compare the residual stresses in the tube-to-tubesheet contact area. Additionally, the axial strength of the tube to tubesheet joint based on the pull-out force against the contact joint force was evaluated and recommended optimum autofrettage pressure to minimize residual stresses in the transition zone given. A single U-tube hole and tubesheet with ligament thickness was taken as a single cylinder and plane strain condition was assumed. An iterative method was used in FEM simulation to find the limit autofrettage pressure at which pull-out force and contact force are of the same magnitude. The joint contact force was estimated to be 20 times more than the pull-out force and the limit autofrettage pressure was estimated to be 141.85MPa.

• 한국소프트웨어감정평가학회 논문지
• /
• 제13권1호
• /
• pp.15-21
• /
• 2017

수 많은 파일로 이루어진 소프트웨어 패키지를 일일이 분석하는 것은 많은 시간과 비용을 요구하는 작업이다. 이에 리눅스 재단의 워킹그룹인 SPDX에서는 소프트웨어의 명세정보(메타데이터) 규약을 발표하였다. SPDX 문서는 2017년 상반기 기준 2.1버전이 발표되었으며, 총 7개의 콘텐츠에 66개 항목이 존재한다. 또한 Tag/Value 형식과 RDF형식을 권장하며, 스프레드시트 형식을 지원한다. 본 연구에서는 SPDX 문서를 각 항목별로 분류하고, 유효성 검사를 해주는 SPDX Parse & Validator 툴을 개발하였다. 추후 SPDX 문서를 생성(Generator)하는 툴을 개발하여 보다 효율적으로 소프트웨어 패키지를 관리하고자 한다.