• Journal of Forest and Environmental Science
• /
• v.33 no.1
• /
• pp.74-77
• /
• 2017

The purpose of this study is to analyze the effect of thinning intensity on the growth of large diameter trees in Korean white pine (Pinus koraiensis S. et Z.) plantation. Eight thinning plots were analyzed by categorizing into heavy thinning, light thinning, no thinning (control) according to thinning intensity. As a result, average DBH increased more in heavy thinning plots than in light thinning or unthinned plots. The number of large trees (DBH>25 cm) were obviously shown the most in heavy thinning plots. It is considered that heavy thinning is needed for the production of the large diameter trees.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.153-156
• /
• 2008

Comparative analysis of forest fire danger rating on the forest characteristics of thinning area and non-thinning area on forest fire burnt area was studied in this work. To investigate the effect of thinning slash in forest fire, Gangneung-si Wangsan-myeon, Ulgin-gun Wonnam-Myeon, Samchok-si Gagok-Myeon, in which forest fire broke out, were selected. As a result that investigated forest fire danger ratio between thinning slash and non-thinning slash, leeward scorching ratio(36%), crown damage ratio(29%), mortality of branch at the former are higher than those at the latter, leeward scorching ratio of tree, where thinning slash is around, is 10%-20% higher than that of independent tree. So I estimate that thinning slash has a some effect on the intensity of forest fire. And the result to investigate damage of forest fire according to tree species shows that leeward scorching ratio of conifer is 5% higher than that of non-conifer, and mortality of branch of the former is 19% higher than that of the latter. It is considered that forest fire may affect directly to a tree trunk if it diffuse to piled thinning tree because there was no space between thinning trees and trees. Furthermore, it was found that re-ignition had a chance to occur due to lots of piled thinning trees.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.223-230
• /
• 2007

Nowaday, for the promotion of producing forest trees, production of excellent timbers, and build-up of public forest area, it is on the increase of the thinning-forest for artificial forest, natural forest, eco-friendly forest, and the forest for development and improvement of forest resources nationwide. Even though the thinning-forest is applied around 180,000ha every year, the quantity of collected/used products is only 18,000ha $(240,000m^3)$ which is 10% of the whole thinning-forest area. Meanwhile, some reports represent that the left products after thinning-forest might increase the severity of forest fire and the waste of resources. Therefore, this study focused on the analysis of correlation between the accumulated products after thinning-forest and forest fire, and providing a preparation plan for the forest fire.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.17-24
• /
• 2020

This study aimed to figure out and compare the increment of biomass by thinning intensity focused on the plantation of the two major coniferous species (Larix kaempferi and Pinus koraiensis) of South Korea. The inventory interval was three years under the effects of three types of thinning treatments; control (no thinning), light (20% thinning) and heavy (40% thinning). The results showed standing biomass increment of both species decreased as thinning intensity increased (heavylight>control). Meanwhile, the lowest of on-site biomass changes occurred in the control plot, and the greatest was in the heavy thinning plot because thinning was involved with leaving the felling residual biomass (leaves, branches and roots) on the site. According to the results from this short-term study, unthinned stands is preferable for maximizing standing biomass as well as carbon sequestration. However long-term investigation should be considered in order to see more clear results.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.5-12
• /
• 2000

The main purpose of this study is to obtain spatial image information toward forest thinning process in Larix forest stands. Thirteen different alternatives were simulated to visualize on the basis of actual thinning work photos. The options were illustrated as photos produced by photoshop program. Each alternatives were evaluated by forest visitor group with total 244 respondents after reliability test. Spatial images of 13 thinning photos were measured by 12 semantic differential scale as broad -narrow, ordered-tangled, friendly-unfriendly, monotonous-divers, dry-refreshing, relieved -stifling, healthy-sickly, uniform-scattered, dead-alive, opened-closed, bent-straight, and beautiful-ugly. In comparison with thinning stands and natural stands, thinning works were visual improvement effects of spatial images. Seemingly, this trend is due to definite form beauty, straight and clear length form of coniferous forest, As can be expected, slash and downwood were negatively related to improvement effects of spatial images. The 60% ratio of stem/ tree height and 450-950 trees/ha was positive in attraction of spatial images. Results indicate how to conduct forest thinning system for spatial images on Larix forest stands.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.217-222
• /
• 2007

Since 1973, we attain a successful achievement of nation-wide afforestation such as a thick forest and heaped-up leaves. However, the higher of the formation density in forest, the more dangerous to be a large-scale forest fire whenever fire occurs. According to the type of forest in the country, 42% of the forest is occupied by conifer forest that are highly flammable, and the distribution of forest age is in a transition period from immature forest to mature one. And the structure is too weak to the forest fire for the occurrence and spread because there are too many scrub and shrub trees in the forest. As a matter of course, it is on the increase of the thinning-forest that can shift the forest structure from a weak on forest fire to a strong one nowaday. In other words, thinning-forest has primary purposes such as the promotion of producing forest trees, production of excellent timbers, and build-up of public forest area. Furthermore, in some reports, the reduction of ladder fuel by eliminating the vertical/horizontal fuel in a forest and ensuring spaces in the forest can decrease the occurrence of forest fire and the risk of spread of burning as by-effect. Therefore, this study is designed to clarify the relation with the risk of forest fire by an on-spat-investigation of the characteristics of forest composition on the thinning and the non-thinning area.

• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.32-39
• /
• 2009

In this study, 18 plots were selected for particular investigation on Gangneung area and Samcheok area and Uljin area, where forest fire was occurred after thinning in 2007. After selection, a relationship between a damage of forest fire and thinning were compared and analyzed. Many factor such as a damaged species, a thinning or non-thinning, a direction of forest fire head, DBH, a height of tree, a mortality of tree, a leeward scorching ratio, a crown damage ratio, a forest tree standing crop density, a crown base height, a leaving of thinning slash, a location of plot (GPS), elevation, an aspect of slope, an angle of slope, and a topography were measured. Therefore, we analyzed a relationship with forest fire. In the result of this analysis, it was founded that the leeward scorching ratio was 24.7% on thinning area whereas 60.2% on non-thinning area. Subsequently, leeward scorching ratio on thinning area was increased by about 35.5% more than on non-thinning area. In the result of analysis about tree species, a forest of pine tree was more damaged than forest of oak tree. The mortality of tree was increased by about 41.4% on non-thinning area. When stands were close to thinning slashes, these were more damaged by 10${\sim}$20% than other stands for increasing of amount of a combustion material. Especially, as potential of re-ignition increased for more cumulated thinning slash, it will be more important to require a method for a periodical removing or practical utilization of slash.

• Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.85-98
• /
• 2022

Background: Korean white pine (Pinus koraiensis) is a major commercial species, and the importance of the oak trees (Quercus spp.) is increasing due to various factors such as environmental and ecological values. However, more information is required to clearly understand the growth characteristics of these species especially regarding thinning intensity. This study was performed to provide the basic information to develop the silvicultural guideline and field manual by analyzing tree and stand characteristics in line with thinning intensity in the Korean white pine plantation and oak-dominated natural deciduous forest. Results: Diameter at breast height (DBH) and volume changes by the thinning intensity in the Korean white pine plantation were significantly different from those in the oak-dominated deciduous natural forest. In particular, DBH distribution in the pine stand appeared that there were more large diameter trees as the thinning intensity was higher. DBH periodic annual increment (PAI) of the pine stand was higher as the thinning intensity was stronger and the growth period was shorter. This trend was similarly shown in the natural deciduous forest, but the amount of PAI was smaller than in pine stand. The volume PAI after thinning was not decreased over time. In each stand type, the PAI tended to be lower as stand density was higher. The volume PAI in the pine stand was significantly higher than that in the oak-dominated natural deciduous forest. Dead trees occurred the most in the unthinned plots of each stand type, and those were higher in the natural deciduous forest. Ingrowth trees were observed only in the natural deciduous forest, and its distribution was the lowest in unthinned plots; Korean white pine as ingrowth occurred the most frequently among many tree species. Conclusions: Different effects of thinning treatment on DBH and volume PAI, mortality, and ingrowth were observed for each stand. With respect to forest growth, Korean white pine plantation was superior to the oak-dominated natural deciduous forest. The results of this study offer fundamental information for the development of silvicultural guidelines for Korean white pine plantations and oak-dominated natural deciduous forests in Korea.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.165-171
• /
• 2011

This study was conducted to investigate the effect on pine wilt disease by health-thinning, thinning and sapling tending in red pine forest (Pinus densiflora). As a part of developing forestry control methods for pine wilt disease control. In case of putting in pine sawyer (Monochamus alternatus) with pine wood nematode (Bursaphelenchus xylophilus), the specimen trees in health-thinning, thinning and control treatment were withered more than 50%, although there were not statistically significant differences in treatments. In treatment site, thinning slashes had influenced on the spread of pine wilt disease (experiment 1). In thinning stand of sapling pine, site with thinning slashes had highest mortality (> 90%). There were approximately 10% mortality in the site of carried thinning slashes from case and the site of non-thinning with released M. alternatus (experiment 2). The larvae had not appeared in young tree stump with health-thinning and thinning at April, the current emergence year of M. alternatus, but there were larvae in sapling tree stump with thinning at May, the current emergence year of M. alternatus. In case of stands with infected young and sapling tree by pine wilt disease, there is no effects of on pine wilt disease control by health-thinning, thinning, saplings tending at April and May, the current emergence year of M. alternatus, and leaved thinning slashes had influenced on the spread of pine wilt disease as habitation of M. alternatus.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.303-312
• /
• 2018

This study was conducted to investigate the relationship between the decrease of forest biomass by forest thinning and the change of temperature in the natural forest by measuring forest biomass and temperature before and after forest thinning in the Pusan National University forest where afforestation had been carried out. We intended to investigate the relationship between the forest biomass, estimated by calculating the Basal area, Crown area and Crown volume using the same formula to the same quadrat before and after forest thinning, and the forest temperature. Temperature measurement was carried out on April 20, 2016 through 28 before forest thinning, July 26, 2016 through November 4 around the time of forest thinning, and April 15, 2017 through May 8 after forest thinning. A temperature data logger was installed to point north at the height of 2.0 m above the ground in the center of the quadrat to record data every 10 minutes during the measurement periods. We used the AWS (Automatic Weather Station) data of the Dongnae-gu area located in the nearby city because it was difficult to set the control group since the whole forest was the subject to the forest thinning. The analysis of the relationship between forest biomass change and temperature showed that the change in temperature inside the forest was the greatest in the midday (12:00 - 15: 00) and was highly correlated with the Crown volume in the forest biomass. The temperature increase was much larger (average $1.91^{\circ}C$) 1 year after forest thinning than immediately after forest thinning (average $0.74^{\circ}C$). The comparison of the decrease rate of Crown volume and the increase in temperature showed that the Pitch pine community, which showed the highest decrease of Crown volume by 15.4%, recorded the highest temperature rise of $1.06^{\circ}C$ immediately after forest thinning and $2.49^{\circ}C$ 1 year after forest thinning. The Pitch pine-Korean red pine community, which showed the lowest Crown volume reduction rates with 5.0%, recorded no significant difference immediately after forest thinning but a temperature rise of $0.92^{\circ}C$ 1 year after forest thinning. The results confirmed that the decrease of forest biomass caused by forest thinning led to a rapid increase of the internal temperature. The fact that the temperature increase was more severe after 1 year than immediately after forest thinning confirmed that the microclimate changes due to the removed biomass cannot be recovered in a short time.