• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.232-243
• /
• 2024

Purpose: Recently, large-scale forest fires caused by climate change, natural disasters, and human factors have been increasing every year in the East Coast and Taebaek Mountains region. Although forest fire extinguishing using helicopters is currently increasing, the need to introduce air force transport aircraft has continued to be raised due to the importance of early fire extinguishment to respond to large forest fires and the difficulty of extinguishing forest fires between sheep. This study seeks to present a plan for developing a post-fire management system for several aspects - achieving operational objectives, overcoming the operating environment, selecting a staging area, and efficient operation measures - to efficiently perform forest fire extinguishing missions using Air Force transport aircraft. Method: Based on literature research on forest fire extinguishing, forest fire extinguishing experiments using fixed-wing aircraft, and the operation status and operation method of forest fire extinguishing helicopters, the pros and cons of helicopter operation and the effects of large forest fire extinguishing using a large transport aircraft (C-130) Analyze the effectiveness of operation through analysis. Results: When extinguishing a large forest fire, an effective CM (Consequence Management) application plan was derived, including effective operation, control, command system, dispatch request, and forest fire extinguishment when integrating helicopter and fixed-wing aircraft (C-130). Conclusion: The application of the concept of CM (Consequence Management) is partially applied to some areas of chemical, biological, and radiological (CBRNE) protection in Korea, but efficient operation, control, and command systems are established when integrated operation of helicopters and large aircraft (C-130) in forest fire extinguishment. the concept of CM (Consequence Management), which is operated in advanced countries, was applied for safety management, dispatch requests, and forest fire extinguishing, thereby contributing to the establishment of a more advanced disaster and post-disaster management system.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.131-138
• /
• 2011

Currently, many forest residues have been generated by the National Forest Management Operation. Unfortunately, most of the forest residues are supposed to be used as raw materials for burning fuels like wood pellets. Even though the forest biomass must be effectively used for making high value-added products, they may be subject to disposable raw materials for wood pellets. Wood pellets are regarded as burning fuels with less contribution to the decrease in carbon gas emission, compared to raw materials for kraft pulps. In this study, we studied whether or not forest biomass mixed with various ages and, species could be used as raw materials for kraft pulps.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.63-71
• /
• 2012

This study was carried out to investigate pulping properties of the forest biomass arising from the national forest management operation. The forest biomass was collected and classified into many groups according to their species and age. After the chips were made from the forest biomass, the measurement of chip size and chemical analysis were performed. To make the pulps from the forest biomass, the kraft pulping was applied and thereafter the physical and optical properties of kraft pulps were measured. The pulp fibers from the forest biomass had the similar mean fiber length, but their properties became different according to wood species and ages. Differently from the other species, kraft pulps from chestnut wood had the highest kappa number. Acacia, paulownia and chestnut woods made kraft pulps with lower tensile strength and brightness than the others. It could be concluded that acacia, paulownia and chestnut woods must be screened out in order to make a good quality of kraft pulps while being collected during Forest Management Operation.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.615-621
• /
• 2015

This study was conducted to analyze accessibility and reduction effect of forest operations cost before and after forest road construction based on actual silvicultural operations in 5 regional forest service(8 management planning district) where forest operations was enacted consistently. The result show the accessibility and the reduction effect of the operation cost, the accessibility of forest operation area within 500 m from forest road or public road increased about 3.2 times after the forest road construction. The reduction effect of the operation cost was averagely 576,000 won/km/year. According to the results, forest road had an effect on improvement of accessibility and reduction effect of forest operation cost. This result could be offered basic information to support policy of forest road expansion.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.189-195
• /
• 2016

Logging equipment and method have a major influence on harvesting productivity and cost. This study investigated the productivity and operational costs of tree-length cable yarding system using HAM300, a domestically developed tower yarder. We tested HAM300 for thinning operation in Pinus densiflora stands at Gangreung, Gangwon-do on April, 2014. To assess the productivity we conducted time study for each stage of the operation. When the average time/cycle was examined for each stage of the operation, the longest was for yarding (241 sec), followed by delimbing (237 sec), felling (153 sec), and processing (103 sec). Furthermore, productivity for felling was $8.6m^3/hr$, followed by delimbing ($5.1m^3/hr$), yarding ($3.5m^3/hr$), and processing ($8.1m^3/hr$). The total cost for the tree-length logging system was $58,446won/m^3$, of which the majority was incurred by the yarding cost at $46,217won/m^3$ (79.3%), whereas the lowest cost was for felling at $2,359won/m^3$ (4.1%). We suggest that it is necessary to foster specialized operators and provide training in operating the tower yarder thereby implementing efficient harvesting system resulting from low-cost yarding.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.583-593
• /
• 2022

The harvesting system in South Korea faces the problems of aging workers and high wages, so it is necessary to improve the operation system and train workers to use high-performance forestry machines. This study compared the effectiveness and costs of yarding and processing operations between a multi-operation system using a tower yarder (HAM300) and a processor (KESLA 20SH) with those of a single-system using a forestry combi-machine. A whole-tree (cable) yarding operation was conducted in the clear-cutting area located at Compartment 15, Gwangneung Experimental Forest, National Institute of Forest Science, and the productivity and cost of multi- and single-system were analyzed. The productivity of the single-system was 1.5 m³/PMH and 1.6 m³/PMH higher than that of the multi- system because the single-system produced 1 log/cycle more than the multi-system in the yarding operation. The cost was approximately 12.1% lower for the single-system (￦36,113/m³) than for the multi-system (￦41,065/m³). The costs of the single-system and multi-system were decreased by maximums of 22.6% and 15.9%, respectively, by decreasing the idle time.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.1-8
• /
• 2012

This study was carried out to explore optimum use of the products generated from the National Forest Management Operation (NFMO) as raw materials for kraft pulp. First of all, different wood species from NFMO were randomly mixed, and then they were used to make kraft pulp under the specified condition. All kraft pulps made from the mixed species displayed equal physical properties to those from foreign wood chips used in Moorim P&P Co. Ltd. For optical properties, most of the unbleached pulps had high brightness but the pulp made from wood species containing chestnut tree showed the lowest brightness due to its high kappa number. Finally, the products from NFMO had little negative effects on the properties of kraft pulps. This means that they could be used as complementary raw materials for kraft pulps with foreign wood chips.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.271-281
• /
• 2021

Pinus densiflora and Larix kaempferi forests not only extended the plantation management area but also cultivated to the sustainable wood supply chain during the last 5-years. These prescriptions are primarily done by manual operation activities, particularly in young tree tending. Two types of tending activities, brashing by brush cutter(BB) and pruning by pruning shear and saw(PP), were selected for the investigate of musculoskeletal disorders' level and postural risks using Ovako Working Posture Analysis System (OWAS). The postural risk indexes (BB and PP) ranged from 115 to 125 and 102 to 105, respectively. There is no significant difference between the species. The young tree tending operations had low postural risks. The results may be used as basic data to develop technical guideline for safe young trees.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.143-149
• /
• 2011

In recent, many forest residues have been generated by the National Forest Management Operation. Unfortunately, most of the forest residues are supposed to be used as raw materials for burning fuels like wood pellets. In this study, we investigated whether or not this forest biomass mixed in various ages and species could be used as raw materials for making kraft pulps in a view of optical properties.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.210-216
• /
• 2021

Musculoskeletal disorders affect workers' safety in most industries, and forest operations are classified as a musculoskeletal burden according to the Occupational Safety and Health Act in South Korea. In particular, felling and delimbing operations are mainly conducted by manpower, and then, it is necessary to evaluate ergonomic risk assessment for safety of felling and delimbing workers. Three ergonomic risk assessment methods, such as Ovako Working posture Analysis System (OWAS), Rapid Upper Limb Assessment (RULA), and Rapid Entire Body Assessment (REBA), are available for assessing exposure to risk factors associated with timber harvesting operations. Here, three ergonomic risk assessment methods were applied to examine ergonomic risk assessments in chainsaw felling and delimbing operations. Additionally, exposure to risk factors in each method was analyzed to propose an optimal working posture in felling and delimbing operations. The risk levels of these operations were evaluated to be highest in the RULA method, followed by the OWAS and REBA methods, and most of the exposed working postures were examined with a low-risk level of two and three without requiring any immediate working posture changes. However, two significant working postures, including the bending posture of the waist and leg in felling operation and standing posture on the fallen trees in delimbing operation, were assessed as the high-risk level and needed immediate working posture changes. Low-risk work levels were examined in the squatting posture for felling operation and the straightened posture of the waist and leg for delimbing operation. Moreover, the slope in felling operation and the tree height in delimbing operation significantly affected risk level assessment of working posture. Therefore, our study supports that felling and delimbing workers must operate with low-risk working postures for safety.