• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.396-408
• /
• 1996

The purposes of this study were to standardise the forest working system to design the intensity of working system in felling operation of the thinning forest in our country as well as to contrive the improvement of working method and the increase of productivity. For the purpose of investigating these, element working was classified by felling operation in softwood thinning forest, and a pulse rate were measured and analyzed. The results were as follow : 1. From the analysis of the pulse frequence measurment, the average pulse showed 108 pulse per minute for worker A in the total of pure working time, 130 pulse per minutes for worker B, 119 pulse per minute for worker C and 125 pulse per minute for worker D, respectively. 2. From the results of the pulse frequence analysis according to element working classification, the highest pulse frequence represented 115 pulse per minute for worker A in the circumference, 131 pulse per minute for worker B in the movement, 122 pulse per minute for worker C in the limbing operation and 128 pulse per minute for work D in hang-up. 3. If the original pulse frequence was 100% for workers, the working intensity showed as follow : worker A was 160%(original pulse frequence was 61=100%) for the total of the working intensity and 188% for the circumference among element working. Worker B was 220%(original pulse frequence was 57=100%) for the total of the working intensity and 229 for movement among element working. Worker C was 159%(original pulse frequence was 73=100%) for the total of the working intensity and 168% for limbing operation among the element working. Worker D was 156%(original pulse frequence was 70=100%) for the total of working intensity and 182% for hang-up among element working. 4. At the limit point of Labor performance rating, showing the total of working intensity, overtime pulse rate per minute was 30 for worker A, 207 for worker B, 14 for worker C and 67 for worker D. Worker B was highest in working intensity, and got physically a big load.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.1
• /
• pp.61-71
• /
• 2007

The main purpose of this study was to develop Automatic Measurement System for monitoring tree's vigor using Ubiquitous Sensor Network This study also focused on presenting an alternative for monitoring automatically tree's vigor due to Shigometer's limits. Application test of the system in comparison with Shigometer showed that the measurement values were not different to choose between the two, and battery lasted about 1,844 days in this system. To test the sensor network the possible transmission distance using the sensor network in maximum was 130m. Investigation and management expenses can be reduced and labor productivity will also be improved in the forest and street trees.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.94-97
• /
• 2006

Timber stand age information of timber in industrialized plantation forest is generally collected by field surveying which is labor-intensive, time-consuming, and very costly. It is also inconsistent in analyses perspective. As an alternative, The objective of this research is to present a practical solution for estimating timber age of loblolly pine plantation using Landsat thematic mapper (TM) images, shuttle radar topography mission (SRTM), and national elevation dataset (NED). A multivariate regression model was developed based upon satellite image-based information (i.e.normalized difference vegetation index (NDVI), tasseled cap (TC) transformation, and derived tree heights). A residual studentized technique was applied to remove potential outliers. After that, a refined age estimation model with a correlation coefficient R-square of 84.6% was obtained. Finally, the feasibility test of estimated model was performed by comparing estimated and measured stand ages of timber plantations using test datasets of plantation stands (2,032 stands). The result shows that the proposed method of this study can estimate loblolly pine stand age within an error of $2{\sim}3$ years in an effective and consistent way in terms of time and cost.

• Korean journal of applied entomology
• /
• v.33 no.3
• /
• pp.201-206
• /
• 1994

Trunk implantation method of phosphamidon 50% Lq.is commonly applied to control the pine needle gall midge (Thecodiplosis laponensts Uchida et Inouye) Since trunk implantaion is normally practiced during the late Spring, it is often difficult to accommodate necessay labor in mral area. As an alternative, aerial spraylng of less toxic ~nsecticide was designed. Usage of less toxic insecticide in the aenal control of pine needle gall midge can reduce the damage to forest ecosystem. The buproferin, one of the insect growth regulator, was selected at d~fferent rate of dilutions and the treatments effects ruere evaluated at different date and time When 50 t~mes diluted solution of buprofezin 40% SC was treated on different period, there was no significant difference in dficacies. the control efficacies of buproferin 40% SC was measured by occurrences (%) of gall formation of the pine needle gall midge using a ultra low volume (ULV) sprayer and the dilutions of 10X 30X and 50X of buprofez~n 40% SC gave efficacies. 72.4. 57.6 and 8.4, respectively.

• The Journal of Information Systems
• /
• v.32 no.4
• /
• pp.229-245
• /
• 2023

Purpose This study aims to understand the inclinations of young job seekers towards "hidden champions" - small but competitive companies that are emerging as potential solutions to the growing disparity between youth-targeted job vacancies and job seekers. We utilize machine learning techniques to discern the appeal of these hidden champions. Design/methodology/approach We examined the characteristics of small and medium-sized enterprises using data sourced from the Ministry of Employment and Labor and Youth Worknet. By comparing the efficacy of five machine learning classification models (i.e., Logistic Regression, Random Forest Classifier, Gradient Boosting Classifier, LGBM Classifier, and XGB Classifier), we discovered that the predictive model utilizing the LGBM Classifier yielded the most consistent performance. Findings Our analysis of the relative significance of preference determinants revealed that industry type, geographical location, and employee count are pivotal factors influencing preference. Drawing from these insights, we propose targeted strategic interventions for policymakers, hidden champions, and young job seekers.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.208-215
• /
• 2000

In order to improve 'Salso' method (conventional tapping method) which was very inefficient in the aspects of collection time and labor, this study was carried out to investigate the effect of the application date and the distance from treatment point in the lactree(Rhus verniciflua) treated with 10% CEPA and to decide the possibility of application of the technique in the field. Bark thickness was significantly increased to the part 40cm above and below the treatment point, but urushiol content was increased to the part 20cm above and 10cm below the zone treated with 10% CEPA. The urushiol content of the bark was highest at 5cm above the treated zone and decreased in the order of 10, 20, and 40cm. And the urushiol contents of the bark of the upper part were higher than that of the low part. The effects of CEPA on bark thickness were similar to urushiol contents. Urushiol production of lactree is highly dependent on climatic conditions and particularly on the precipitation, and duration of sunshine. Ten percent of CEPA-lanolin pastes which was treated on June 16 affected bark anatomy and urushiol contents, while the treatment on August 24 did not affect. In the Rhus verniciflua treated with 10% CEPA, the urushiol contents was initially increased from 7 days after treatment, continued for the 4 weeks, and then slight decrease occurred at 5 weeks after the treatment. We measured a total sap yield by Salso method in lactree treated with 10% CEPA. By applying 10% CEPA, the sap yield was increased 3-4 times compared to that of untreated trees in the first tapping. But the relative ratio was gradually decreased from the second tapping to sixth, and after seventh tapping, the untreated trees secreted more sap than the treated trees. We discussed about the causes.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.15-20
• /
• 1977

This experiment was to investigate and analyse the effect of fertilizer at different level of treatment where the ordinary chemical fertilizers (Urea, TSP, muriate of potash) and the same amount of nutrients contained solid fertilizer respectively applied. 1. Ordinary chemical fertilizer known as quick releasing fertilizer showed its main effect in the first and second years but the effect was declined in the third year wheras slow releasing solid fertilizer showed no effect in the first year but gradually appeared in second year was reached at peak in the third year and effect continued till the forth year. 2. Both treatments, ordinary chemical fertilizer and solid fertilizer, showed fertilizer effect however ordinary chemical fertilizer treatment had 6.2 per cent of fertilizer loss over the solid fertilizer treatment. 3. Optimum fertilizer dose per tree seems to be 40-80 grams and fertilizer effect was continued for three years after the treatment. Fertilizer response in the first year only appeared on leaves with dark in color and its response on growth was observed in second year where ordinary chemical fertilizer applied and solid fertilizer treatment showed in third year. 4. For the above results, it may be desirable that optimum amount of ordinary chemical fertilizer should be applied once every other or every two years and solid fertilizer should be applied once every two years or every three years. 5. Solid fertilizer does not occure fertilizer damage when it was applied in excess and has labor saving advantage. 6. It is highly recommendable to produce solid fertilizer for the forest use in view of improving forest soil fertility and increasing forest resources in Korea.

• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.23-31
• /
• 1988

A total of 320 Larix leptocepzs Trees growing in Kyonggi and Kangwon Province were examined to estimate tree volume and height with DBH and age. The criteria of selecting the "best" regression equation were based on coefficient of determination, $R^2$, adjusted standard error, I, and the ease of application. From the results obtained in this study, the method of estimating tree volume and height with DBH and age showed the following advantages ; 1. Since no measurement of tree height is needed, it saves time and labor in forest survey. 2. It has the ease of application because age is determined directly in artificial forests. 3. Volume and height can be estimated more easily and accurately with DBH and age than other methods.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.195-204
• /
• 1999

To improve nut production and timber quality in a plantation, crown shape controls were suggested for Korean white pines (Pinus koraiensis) under age class III through the analyses of the crown shape controls for seed orchard trees in several species, of crown status of controlled and uncontrolled trees in a Korean white pine seed orchard, and of growth characteristics of plantation trees under age class III. For nut production from the small trees less than 8 m, modified leader type can be applied by cutting the central leader and all branches below 1 m and keeping 4~5 nodes with 3~4 whorled branches a node locating 1 m apart. Trees with a 4~8 m long trunk below the first living branch are shaped into trees for nut and timber production, which have a 4~8 m long knotless stem and a modified leader type crown with 4~5 nodes with 3~4 whorled branches a node at a distance of 1 m. Trees, showing the first living branch at or above 9 m from the surface, are pruned severely for timber production and result in a central leader type containing two fifths of the initial crown. It is advisable to remove the leader and the branches when collecting cones or after/during October to take advantage of easy labor and little resin while cutting. After stem cut, branches showing apical dominance are to be cut to control height when necessary. The removal of the uppermost node may be needed to control the crown shape several years after the initial stem-cut.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.194-204
• /
• 2020

Cultivar parameters, which are key inputs to a crop growth model, have been estimated using observation data in good quality. Observation data with high quality often require considerable labor and cost, which makes it challenging to gather a large quantity of data for calibration of cultivar parameters. Alternatively, data in sufficient quantity can be collected from the reports on the evaluation of cultivars by region although these data are of questionable quality. The objective of our study was to assess the quality of crop and management data available from the reports on the regional adaptation trials for rice cultivars. We also aimed to propose the measures for improvement of the data quality, which would aid reliable estimation of cultivar parameters. DatasetRanker, which is the tool designed for quantitative assessment of the data for parameter calibration, was used to evaluate the quality of the data available from the regional adaptation trials. It was found that these data for rice cultivars were classified into the Silver class, which could be used for validation or calibration of key cultivar parameters. However, those regional adaptation trial data would fall short of the quality for model improvement. Additional information on management, e.g., harvest and irrigation management, can increase the quantitative quality by 10% with the minimum effort and cost. The quality of the data can also be improved through measurements of initial conditions for crop growth simulations such as soil moisture and nutrients. In addition, crop model improvement can be facilitated using crop growth data in time series, which merits further studies on development of approaches for non-destructive methods to monitor the crop growth.