• 한국운동역학회지
• /
• 제21권3호
• /
• pp.327-334
• /
• 2011

The objective of this study was to develop a scientific approach for investigating Korean dance in detail, and to examine the intense expressions and various movements, which are based on Danjeon breathing. For the purpose, we analyzed the movement changes and distribution of forces resulting from the switch in movement between exhalation and inhalation while bending, which is the most basic movement in Korean dance. The following conclusions were drawn from this study. In Korean dance, bending with breathing involves less back-and-forth-movement and more up-and-down movement, as compared to bending without breathing; this indicates greater body stability and a wider range of movements while bending with breathing. In addition, less time is required for bending with breathing at the point of switching from exhalation to inhalation, and it involves less movement of the supporting leg; thus, vending with breathing involves faster switching from bending movements to extending movements. While bending, the raised leg goes through a less smooth curve while breathing, which indicates stronger movement of the toes. Bending with breathing requires a greater braking force than bending without breathing, and the vertical force, generated by switching from exhalation to inhalation, is transferred to extending movements using the ground load. The results of this study can be potentially employed to investigate the expressions used in Korean dance on th basis of its principle of forces. Korean dance has evolved into various creative forms, and basic analytical studies of these diverse forms and related breathing methods re required in the future.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.781-787
• /
• 2010

고장의 특성을 예상하는 것은 미래의 고장을 예견하고 최적의 교체간격을 결정할 수 있도록 해주기 때문에 정비 계획에서 매우 중요하다. 본 연구에서는 신뢰도 해석에서 가장 전통적인 방법 중의 하나인 확률지에 도시하는 기법을 이용하여 J79 엔진 Transfer Gearbox의 고장 분포를 검토하였다. 고장 데이터에 대한 적절한 분포를 찾기 위해서 다양한 확률분포가 이용되었으며, 얻어진 상관계수는 고장데이터가 대수정규분포에 가장 근접함을 나타내었다. 예상되는 비계획 정비행위의 횟수와 다양한 비용 비율에 대해서 최적의 교체간격을 구하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1398-1401
• /
• 2005

The nano/microstructure, the aging response (in T5 heat treatment), and the mechanical/tribological properties of the eutectic regions in squeeze-cast A356 alloy were investigated using nano/micro-indentation and mechanical scratching, combined wit optical microscopy and atomic force microscope(AFM). Most eutectic Si crystals in the A356 alloy showed a modified morphology as fine-fibers. The loading curve for the eutectic region was more irregular than that of the primary Al region due to the presence of various particles of varying strength. In addition, the eutectic region showed lower pile-up and higher elastic recovery than the primary Al region. The aging responses of the eutectic regions in the squeeze-cast A356 alloys aged at $150^{\circ}C$ for different times(0, 2, 4, 8, 10, 16, 24, 36 and 72 h) were investigated. As the aging time increased, acicular Si particles in the eutectic regions gradually came to a fine structure. Both Vickers hardness ($H_V$) and indentation ($H_{IT}$) test results showed almost the same trend of aging curves, and the peak was obtained at the same aging time of 10 h. A remarkable size-dependence of the tests was found. The friction coefficient for the eutectic region was lower than that for the primary Al region.

• The Korean Journal of Physiology
• /
• 제9권1호
• /
• pp.13-22
• /
• 1975

From the study of movements of $Ca^{++}$ in frog cardiac muscle, Niedergerke (1963) postulated that $Ca^{++}$ necessary for the cardiac contraction is stored in a specific pool. Langer et al (1967) and DeCaro (1967) also found a close relationship between the change of $Ca^{++}$ flux kinetics and the change of contractile force. According to the studies of several investigators, Ca II (Bailey and Dressel 1968) or phase I and II (Langer 1965, Langer et al 1967, 1971) in the $Ca^{++}$ washout curve was associated with cardiac contractility. This investigation was aimed to elucidate the anatomical region of the contractile active $Ca^{++}$ pool. At the same time, it was assumed in this study that $Ca^{++}$ in the sarcoplasmic reticulumn represents one of the major intracellular $Ca^{++}$ pool and cardiac contractility was also dependent on the intracellular $Ca^{++}$ concentration. Consequently, this experiment was performed at different temperatures to activate to activate inhibit the deactivating process of activated $Ca^{++}$ in the intracellular space to see if changes in the contractility decay curve existed at different temperatures. The isolated hearts of rabbits and turtles (Amyda maackii) were attached to the perfusion apparatus according to the method employed by Bailey and Dressel (1968). The isolated hearts were initally perfused with a full Ringer solution containing 2 mg/ml of inulin for 1 hr, and then $Ca^{++}$ and inulin-free Ringer solution was perfused while the isometric tension was recorded and a serial sample of perfusion fluid dripping from the cardiac apex was collected for 10 sec throughout experimental period. The above procedure was performed at $23^{\circ}C$, $30^{\circ}C$ and $38^{\circ}C$ on the rabbit heart and $10{\sim}13^{\circ}C$, $10^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$ and $35^{\circ}C$ on the turtle heart. After determination of $Ca^{++}$ and inulin concentration of the samples, the $Ca^{++}$, inulin washout curve and the contractile tensin decay curve were analysed according to the method of Riggs (1963). The results were summarized as follows; 1. In the rabbit heart, there are 2 inulin compartments, 3 $Ca^{++}$ compartments and sing1e exponential decay of contractile tension. In the turtle heart, there are $1{\sim}2$ inulin compartments, $1{\sim}2$ $Ca^{++}$ compartments and $1{\sim}2$ phases of contractile tension decay. The fact that the inulin space was divided into 3 compartments in the washout curve in these hearts indicates the presence of heterogeneity in cardiac perfusion, i.e., overfused and underperfused area. 2. Ca I a9d Ca II in these hearts were found to have $Ca^{++}$ in the ECF compartments because their half times in the washout curves were far smaller than those of the inulin washout curves in the rabbit heart and similar to those of the inulin washout curves in the turtle heart. Ca III in the rabbit heart may have originated from the intracellular $Ca^{++}$ store. But no Ca III in the turtle heart was found. This may be due to the fact that the iutracellular $Ca^{++}$ pool in the turtle heart was too small to detect using this experimental procedure since sarcoplasmic reticulumn in the turtle heart is poorly developed. 3. In the rabbit heart, there were no chages in the half time of Ca I, Ca II, inulin I and inulin II at different temperatures, but the half time of Ca III was significantly prolonged at lower temperatures, and the half time of the contractile tension decay tended to be prolonged at lower temperatures but this was not significant. In the turtle heart, there were no changes in the half time of Ca I, Ca II, inulin 1, inulin II and phase I of the contractile tension decay at different temperatures, but the half time of phase II of the contractile tension decay was significantly prolonged at lower temperatures. This finding indicates that intracellu!ar $Ca^{++}$ in these hearts was also responsible particulary for maintaining the cardiac contractility at the lower temperatures. 4. The half times of contractile tension decay were shorter than those of Ca II in the $Ca^{++}$ washout curves in both animal hearts. According to the above results it was shown that $Ca^{++}$ in ECF is primarily and $Ca^{++}$ in the intracellular space is partially associated with the cardic contractility.

• 수산해양기술연구
• /
• 제19권2호
• /
• pp.111-116
• /
• 1983

국산 자기컴퍼스의 제작에 필요한 기초자료를 제공하기 위하여 인공자기장 발생장치를 제작하여 그 특성을 조사하였고, 인공자장내에서의 자기컴퍼스의 제진 특성을 시험하여 자기컴퍼스의 성능을 부석, 검토한 결과는 다음과 같다. 1. 코일의 굵기 1mm, 직경 1 m, 권회수 117회인 인공자장발생장치의 전류(I sub(i))와 자장의 세기와의 사이에는 수직자장: Z(Gauss)=0.34+1.506 I sub(i) 수평자장: H(Gauss)=0.1834+1.506 I sub(i)의 관계가 있다. 2. T190형 자기컴퍼스는 T165형 자기컴퍼스에 비하여 전 tnbud자장 범위에서 주기는 길었으며, 진폭은 0.08 Gauss 이상에서는 크고, 그 이하에서는 작은 경향을 보였다. 3. 수평자장이 강할수록 주기와 자기자오선에 복귀하는 시간은 짧아지고, 진폭과 주행각은 커졌으며, 제진곡선의 주요점까지의 경과시간(Ti)은 수평자장(H)의 -0.65승에 비례하였고, 과행각(P sub(i))은 0.18승에 비례하였다.

• 마이크로전자및패키징학회지
• /
• 제7권2호
• /
• pp.55-62
• /
• 2000

Si-wafer에 단면 코팅된 UBM(Under Bump Metallurgy)의 젖음성을 Sn-Pb 솔더에서 평가하기 위하여 wetting balance 법을 사용하였다. 단면 코팅된 UBM의 젖음곡선은 양면 코팅된 시편의 젖음 곡선과 비교할 때, 젖음곡선의 모양이 비슷하고 젖음곡선을 특징짓는 변수들의 온도에 대한 변화경향이 일치하였다. 단면 코팅된 금속층의 젖음성을 젖음곡선으로부터 정의한 새로운 젖음 지수 $F_{min}$, $F_{s}t_{s}$로 평가할 수 있었다. Au/Cu/Cr UBM은 젖음시간의 측면에서 Au/Ni/Ti UBM보다 젖음성이 우수하였다 Si-wafer에 단면 코팅된 UBM과 Sn-Pb 솔더의 접촉각을 $F_{s}$와 기울어짐각을 측정하고 메니스커스의 정적상태에서 힘의 평형으로부터 유도된 식을 이용하여 계산할 수 있었다.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.17-25
• /
• 2016

호안은 하천제방의 비탈면이 침식되지 않도록 보호하는 기능을 갖는다. 호안의 설계가 적정하지 않을 경우 강한 유속과 소류력에 의해 제방이 세굴되어 붕괴에 이를 수도 있다. 따라서 호안의 설계시 필요한 대표유속을 산정하는 것은 매우 중요하나 대부분 1차원 부등류해석에서 얻어진 수위와 평균유속자료를 적용한다. 이 경우 만곡 수로에서 발생하는 자유소용돌이와 강제소용돌이에 의한 유속증가는 반영되지 않으므로 만곡부 호안의 안정성을 확보하기 위해서는 대표유속에 대한 보정이 필요하다. 본 연구에서는 수치모의를 통해 단면의 최대유속과 평균유속을 산정하여 만곡 및 세굴영향을 고려한 대표유속 산정방법의 적용성에 대해 검토하였다. 그 결과 단면평균유속에 만곡의 영향과 세굴의 영향을 고려하여 적용한 대표유속과 수치모의결과에 추출된 최대유속을 비교한 결과가 거의 일치하는 것으로 나타났다. 또한, 호안재로로써 돌망태를 사용하는 경우에 대해서 만곡하도와 직선하도 일때의 사석크기를 기존 설계식에 적용하여 비교하였다. 향후, 우리나라의 특성에 맞는 호안설계방법을 제시하기 위하여 하천특성이 다른 대표적인 하천에 대한 추가적인 수치모의 및 분석이 필요하며, 이때 본 연구결과가 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.119-123
• /
• 2007

Dyeing properties of soybean fabrics on gromwell colorants were studied for the effect of dyeing conditions, such as colorants concentration, temperature, time and pH on the dye uptake and effect of mordants on color change, dye uptake and various colorfastness. Antimicrobial activity of soybean fabrics dyed and sim-mordanted with gromwell colorants was examined by shake flask method. Gromwell colorants showed considerably affinity to soybean fabric and its isotherm adsorption curve was Freundlich type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of gromwell colorants to soybean fabric. Soybean fabrics showed R color on Al, Cu and Sn mordant, RP color on Cr and Fe mordant, but soybean fabrics showed low dye uptake depending on mordanting treatment. Light colorfastness was increased for Cr and Fe mordants. Staphylococcus aureus reduction rates were above 90% for Cr and Cu mordanted soybean fabrics, and the others were poor. Klebsiella pneumoniae reduction rates soybean fabrics did not show reduction rate hardly.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.124-132
• /
• 2002

Dyeing properties of silk fabric on gromwell roof colorants were studied for the effect of dyeing conditions, such as methanol ratio, colorants concentration, pH, temperature and time etc. on the dye uptake and effect of mordants and mordanting methods on color change and dye uptake. And various colorfastnesses of dyed fabrics were evaluated far practical use. Gromwell colorants showed high affinity to silk and its isotherm adsorption curve was Freundlich type close to Nernst type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of cromwell colorants to silk fabric. Post-mordanting method gave higher K/S value than other methods, but it was not significantly different color values from unmordanted one. Gromwell colorants produced mainly R and RP color depending on mordants and mordanting method. Dyed fabrics showed high colorfastness irrespective of mordanting treatment. Light colorfastness was increased for repeatedly dyed and Fe mordanted dyed fabrics.

• Steel and Composite Structures
• /
• 제15권6호
• /
• pp.679-703
• /
• 2013

This paper presents experimental investigations of the fundamental behavior of concrete filled steel tube (CFT) beam-columns under fire loading. A total of thirteen specimens were tested to determine the axial force-moment-curvature-temperature behavior of CFT beam-columns. The experimental approach involved the use of: (a) innovative heating and control equipment to apply thermal loading and (b) digital image correlation with close-range photogrammetry to measure the deformations (e.g., curvature) of the heated region. Each specimen was sequentially subjected to: (i) constant axial loading; (ii) thermal loading in the expected plastic hinge region following the ASTM E119 temperature-time T-t curve; and (iii) monotonically increasing flexural loading. The effects of various parameters on the strength and stiffness of CFT beam-columns were evaluated. The parameters considered were the steel tube width, width-tothickness ratio, concrete strength, maximum surface temperature of the steel tube, and the axial load level on the composite CFT section. The experimental results provide knowledge of the fundamental behavior of composite CFT beam-columns, and can be used to calibrate analytical models or macro finite element models developed for predicting behavior of CFT members and frames under fire loading.