• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.859-869
• /
• 2016

Component-scale modeling of boiling is predominantly based on the Eulerian-Eulerian two-fluid approach. Within this framework, wall boiling is accounted for via the Rensselaer Polytechnic Institute (RPI) model and, within this model, the bubble is characterized using three main parameters: departure diameter (D), nucleation site density (N), and departure frequency (f). Typically, the magnitudes of these three parameters are obtained from empirical correlations. However, in recent years, efforts have been directed toward mechanistic modeling of the boiling process. Of the three parameters mentioned above, the departure diameter (D) is least affected by the intrinsic uncertainties of the nucleate boiling process. This feature, along with its prominence within the RPI boiling model, has made it the primary candidate for mechanistic modeling ventures. Mechanistic modeling of D is mostly carried out through solving of force balance equations on the bubble. Forces incorporated in these equations are formulated as functions of the radius of the bubble and have been developed for, and applied to, low-pressure conditions only. Conversely, for high-pressure conditions, no mechanistic information is available regarding the growth rates of bubbles and the forces acting on them. In this study, we use direct numerical simulation coupled with an interface tracking method to simulate bubble growth under high (up to 45 bar) pressure, to obtain the kind of mechanistic information required for an RPI-type approach. In this study, we compare the resulting bubble growth rate curves with predictions made with existing experimental data.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.159-168
• /
• 1994

The purpose of this study was to evaluate the shear bond strength of the porcelain laminate specimens according to the surface roughness of the cut enamel of human anterior teeth. Flat enamel surfaces were prepared in 30 extracted human anterior teeth with diamond disc which were divided into two groups. Group 1 Coarse enamel surface group prepared with LVS-3 bur. Group 2 Fine enamel surface group prepared with superfine diamond bur. 30 teeth specimens of two group were stored in normal saline during 24 hours. 30 disk - type porcelain laminate specimens with diameter 4mm and thickness 1mm were made and sand - blasted on internal surface which were to cemented on enamel surface. Porcelain laminate specimens were cemented on enamel surface with Choice Veneer System (Bisco Dental, U.S.A) according to manufacture's instructions. All teeth specimens of two groups were manipulated with same method and stored In normal saline before testing. An Universal Testing machine (Model No.UTM-4206,Instron, U.S.A) was used to apply shear loads in the vertical directed, and the force required for separation was recorded with a cross head speed of 3mm/min and 500kg in full scale. The results were as follow ; 1. The mean shear bond strength of coarse surface group was 36.30kg and that of fine surface group was 44.39 kg, but there was no significant difference in breaking strength of two groups(p>0.05).

• Steel and Composite Structures
• /
• v.42 no.6
• /
• pp.805-826
• /
• 2022

The free and live load-forced vibration behaviour of porous functionally graded (PFG) higher order nanobeams in the thermal and magnetic fields is investigated comprehensively through this work in the framework of nonlocal strain gradient theory (NLSGT). The porosity effects on the dynamic behaviour of FG nanobeams is investigated using four different porosity distribution models. These models are exploited; uniform, symmetrical, condensed upward, and condensed downward distributions. The material characteristics gradation in the thickness direction is estimated using the power-law. The magnetic field effect is incorporated using Maxwell's equations. The third order shear deformation beam theory is adopted to incorporate the shear deformation effect. The Hamilton principle is adopted to derive the coupled thermomagnetic dynamic equations of motion of the whole system and the associated boundary conditions. Navier method is used to derive the analytical solution of the governing equations. The developed methodology is verified and compared with the available results in the literature and good agreement is observed. Parametric studies are conducted to show effects of porosity parameter; porosity distribution, temperature rise, magnetic field intensity, material gradation index, non-classical parameters, and the applied moving load velocity on the vibration behavior of nanobeams. It has been showed that all the analyzed conditions have significant effects on the dynamic behavior of the nanobeams. Additionally, it has been observed that the negative effects of moving load, porosity and thermal load on the nanobeam dynamics can be reduced by the effect of the force induced from the directed magnetic field or can be kept within certain desired design limits by controlling the intensity of the magnetic field.

• Korean Security Journal
• /
• no.1
• /
• pp.351-370
• /
• 1997

This study concerns possible measures to prevent separatists' terrorist acts against overseas Korean businessmen. Of late, many Korean enterprises are helping a number of foreign countries develop their economy, by building factories and manning regional offices in those countries. But recent development of terrorism especially against Korean businessmen is alarming. This report discusses the need for Korean enterprises heading overseas to prepare themselves with awareness of terrorism and possible protective measures against it, besides their routine pursuance of profits; and for the government and prospective enterprises to refrain from investing in those countries having active separatist movements. If an investment has become inevitable, a careful survey of the region in conflict should be conducted and self-protective measures should be put in place through security information exchange, emergency coordination and training of personnel, etc. This study will first review the past terrorist incidents involving employees of overseas Korean enterprises, and then will focuss on seeking effective measures on the basis of the reported incidents. In carrying out the study, related literature from both home and abroad have been used along with the preliminary materials reported and known on the Internet from recent incidents. 1. The separatist movements of minority groups Lately, minority separatist groups are increasingly resorting to terrorism to draw international attention with the political aim of gaining extended self rule or independence. 2. The state of terrorism against overseas Korean enterprises and Koreans Korean enterprises are now operating businesses, and having their own personnel stationed, in 85 countries including those in South East Asia and Middle East regions. In Sri Lanka, where a Korean enterprise recently became a target of terrorist bombing, there are 75 business firms from Korea and some 700 Korean employees are stationed as of August 1996. A total of 19 different terrorist incidents have taken place against Koreans abroad since 1990. 3. Terrorism preventive measures Terrorism preventive measures are discussed in two ways: measures by the government and by the enterprises. ${\blacktriangleleft}$ Measures by the government - Possible measures at governmental level can include collection and dissemination of terrorist activity information. Emphasis should be given to the information on North Korean activities in particular. ${\blacktriangleleft}$ Measures by individual enterprises - Organizational security plan must be established by individual enterprises and there should also be an increase of security budget. A reason for reluctant effort toward positive security plan is the perception that the security budget is not immediately linked to an increment of profit gain. Ensuring safety for overseas personnel is a fundamental obligation of an enterprise. Consultation and information exchange on security plan, and an emergency support system at a threat to security must be sought after and implemented. 4. Conclusion Today's terrorism varies widely depending on reasons and causes, and its means has become increasingly informationalized and scientific as well while its method is becoming more clandestine and violent. Terrorist organizations are increasingly aiming at enterprises for acquisition of budgets needed for their activities. Korean enterprises have extended their business realm to foreign countries since 1970, exposing themselves to terrorism. Enterprises and their employees, therefore, should establish their own security measures on the one hand while the government must provide general measures, on the other, for the protection of the life and property of Korean residents abroad from terrorist attacks. In this regard, set-up of a counter terrorist organization that coordinates the efforts of government authorities in various levels in planning and executing counter terrorist measures is desired. Since 1965, when the hostile North Korea began to step up its terrorist activities against South Koreans, there have been 7 different occasions of assassination attempt on South Korean presidents and some 500 cases of various kidnappings and attempted kidnappings. North Korea, nervous over the continued economic growth and social stabilization of South Korea, is now concentrating its efforts in the destruction and deterioration of the national power of South Korea for its earlier realization of reunification by force. The possibility of North Korean terrorism can be divided into external terrorist acts and internal terrorist acts depending on the nationality of the terrorists it uses. The external terrorist acts include those committed directly by North Korean agents in South Korea and abroad and those committed by dissident Koreans, hired Korean residents, or international professionals or independent international terrorists bought or instigated by North Korea. To protect the life and property of Korean enterprises and their employees abroad from the threat of terrorism, the government's administrative support and the organizational efforts of enterprises should necessarily be directed toward the planning of proper security measures and training of employees. Also, proper actions should be taken against possible terrorist acts toward Korean business employees abroad as long as there are ongoing hostilities from minority groups against their governments.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.339-348
• /
• 2006

Objective: With development of the skeletal anchorage system, orthodontic mini-implant (OMI) assisted on masse sliding retraction has become part of general orthodontic treatment. But compared to the emphasis on successful anchorage preparation, the control of anterior teeth axis has not been emphasized enough. Methods: A 3-D finite element Base model of maxillary dental arch and a Lingual tipping model with lingually inclined anterior teeth were constructed. To evaluate factors influencing the axis of anterior teeth when OMI was used as anchorage, models were simulated with 2 mm or 5 mm retraction hooks and/or by the addition of 4 mm of compensating curve (CC) on the main archwire. The stress distribution on the roots and a 25000 times enlarged axis graph were evaluated. Results: Intrusive component of retraction force directed postero-superiorly from the 2 mm height hook did not reduce the lingual tipping of anterior teeth. When hook height was increased to 5 mm, lateral incisor showed crown-labial and root-lingual torque and uncontrolled tipping of the canine was increased.4 mm of CC added to the main archwire also induced crown-labial and root-lingual torque of the lateral incisor but uncontrolled tipping of the canine was decreased. Lingual tipping model showed very similar results compared with the Base model. Conclusion: The results of this study showed that height of the hook and compensating curve on the main archwire can influence the axis of anterior teeth. These data can be used as guidelines for clinical application.